Access Control Cards, Tags & Fobs  (540)

Keyscan TX4PRX10 is a 4 button mini RF transmitter C/W HID coil -10 PACK.

ACT-34B belongs to the MegaCode transmitter family with the following features: compatible with all Linear MegaCode™ receivers and controllers, factory block-coded facility and ID codes, suitable for everyday installations, ideal for single-family, multi-tenant, and commercial applications.

This cost-effective, high performance long range reader solution delivers exceptional read ranges. Using two-button key fobs which transmit a unique and highly secure encrypted code to a receiving unit, the system is capable of operating over distances up to 100 metres ­ allowing the receiving unit to be located remotely in a convenient and discrete location.

Card, Proximity, ABS, 125 KHz, 9, -30 ~ +65, 10 ~ 90

iCLASS SE smart card technology is available in 2k bit and 16k bit memory. It features a graphics quality surface and meets ISO standard for use with direct image and thermal transfer printers.

ISO card blank with magnetic stripe & signature panel. Plastic Minifob pocket. 10 card pack box litho printed.

Keyscan K-INTX2 is a 4 button RF transmitter C/W INDALA chip. It is Ideal for security access control applications such as securing garage or gate entries and/or exits.

The iCLASS Smart FOB provides the security and convenience of iCLASS 13.56 Mhz contactless smart card technology in a molded plastic key fob. It is available in 2k bit (256 Byte) or 16k bit (2k Byte) configurations.

iCLASS SR smart card technology is available in 2k bit and 16k bit memory. It features a graphics quality surface and meets ISO standard for use with direct image and thermal transfer printers.

Impro provide a wide range of high-quality RFID tags for use with their range of access control systems. These tags are manufactured to international standards, providing long and trouble-free operation in the field.

iCLASS SR smart card with added magnetic stripe is available in 2k bit and 16k bit memory. It features a graphics quality surface and meets ISO standard for use with direct image and thermal transfer printers.

iCLASS SR smart card is available in 2k bit and 16k bit memory. It features a graphics quality surface and meetsISO standard for use with direct image and thermal transfer printers.

Net2 proximity ISO cards are for use with the Net2 system To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the Watchprox to the desktop reader Once programmed into the software the token is ready for use Uses Hitag2 technology with proprietary encoding which includes an authentication protocol in the form of a password exchange between the token and the reader

Net2 proximity ISO cards are for use with the Net2 system To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the Watchprox to the desktop reader Once programmed into the software the token is ready for use Uses Hitag2 technology with proprietary encoding which includes an authentication protocol in the form of a password exchange between the token and the reader

iCLASS SE smart card is available in 2k bit and 16k bit memory. It features a graphics quality surface and meetsISO standard for use with direct image and thermal transfer printers.

iCLASS SE smart card with added magnetic stripe is available in 2k bit and 16k bit memory. It features a graphics quality surface and meets ISO standard for use with direct image and thermal transfer printers. Pkg: 50 cards

MIFARE Classic ID card with 1 kByte data storage 2 application areas, one of which can be customised MIFARE cards have a wire antenna and a MIFARE Chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz The credit card sized card conforms to the ISO-standard size enabling surface printing with conventional ISO compatible card printers MIFARE cards support multiple application areas that can be individually protected The unique badge number is printed on top of the card enabling contactless reading by readers Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions The card is durable with IP68 and can be fully submerged, all the electronics are sealed inside

Uses PAC (153KHz) proximity technology Durable & robust Offers a unique ID code Meets ISO standards for thickness Can be used with all direct image or thermal transfer printers

iCLASS SR Smart FOB provides the security and convenience of iCLASS 13.56 Mhz contactless smart card technology in a molded plastic key fob. It is available in 2k bit (256 Byte) or 16k bit (2k Byte) configurations.

PROX II ISO cards an embedded antenna and PROX II chip The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 125 kHz PROX II cards are static credentials with a unique card number and a customer (or facility) number Contactless credentials with PROX II chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

iCLASS SR Clamshell 13.56 MHz read/write contactless smart card with an ABS shell construction for durability in harsh environments and can be used for diverse applications. 2k bit (256 Byte) card with 2 application areas.

An iCLASS SE Clamshell 13.56 MHz read/write contactless smart card with an ABS shell construction for durability in harsh environments and can be used for diverse applications.

The miPASS KeyFob has an imbedded chip which is available in 1Kbytes of EEPROM.  The keytag has a write endurance of 100,000 cycles.  The KeyTag can support mulitple applications on the chip, each with its own dedicated keys and memory area.  The miPASS KeyFob is a practical substiute for the smart card as it allows you to use the Mifare technology without having to carry a card.

CEM CRD/218/004 DESFire 13.56MHz read/write contactless smart card can be used for a range of different applications from access control to other applications such as cashless vending and public transportation. Using a standardised Mifare Application Directory (MAD), the card contains a structured file system offering security for multiple applications and to support future growth. Utilising Triple DES (3DES) encryption, the information is securely stored on the card, ensuring that it cannot be cloned and that only valid cards are granted access.

In stainless steel construction. LED status indicator. Comes with controller and PSU.

High security 5-State Alarm monitoring. Optional onboard Ethernet Communication. Real time Diagnostic Display. Supports virtually all reader types.

Proximity reader c/w controller. Available in ABS or stainless steel construction. LPM/INT: retrofit model.

Paxton Access has launched a new keycard for use with its hands free access control solution.  The new keycard offers a maximum range of up to 50m. The new triple-function Net2Air keycard operates as a normal hands free token on doors equipped with a hands free interface and, by operating the keycard buttons, as a long-range access card.  The keycard's two buttons can be programmed to operate two different access points, such as  ‘in' and ‘out' car park barriers.  Pressing a button momentarily boosts the range of the keycard from a maximum range of 2.5m (like a hands free keyfob) to a maximum range of up to 50m.Hands free and long-range capability can be easily added to an existing installation.  It simply requires the fitting of the hands free interface between the control unit and the reader.  The hands free interface coverts any PROXIMITY P series reader to ‘hands free' including Paxton Access' small 38mm PROXIMITY P38 reader.The advantages of using Paxton Access hands free interfaceRetrofit to existing system - Fit the hands free interface to new systems, or upgrade an existing system        Only those who need hands free access require hands free tokens - keeps costs downHands free access from small readers - Hands free access from our P series readers.  No expensive ground or door loops neededDon't just think disabled access - Hands free will make life easier in stores, loading bays, and hospitalsSuitable for our Net2 and Switch2 systems - Both standalone and PC based systems can be converted to hands free

Fob, 319.5, 32 × 50 × 9, -12 ~ +49

Mifare DESFire EV1 ID keyfob with 8 kByte data storage 2 application areas, one of which can be customised MIFARE keyfobs have an embedded antenna and MIFARE chip The keyfob is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz MIFARE keyfobs support multiple application areas that can be individually protected The unique badge number is printed on top of the keyfob Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions

Gallagher offer a range of cards and transponders for different reader technologies with various encoding options.

The Insight Intelligent 4 Door Access module provides an interface for up to 4 Doors using 4 card readers or, if used in conjunction with the Intelligent Access module Reader Expander board up to 4 Door with Card In / Card Out operation using 8 card readers. Access control functions continue in the event of LAN failure or damage to the control module. Events are recorded to review within the modeule whilst offline. Each card reader interfaces operate with common magnetic swipe and wiegand readers without the need for any additional interfaces.

MIFARE Classic ID keyfob with 1 kByte data storage 2 application areas, one of which can be customised MIFARE keyfobs have an embedded antenna and MIFARE chip The keyfob is recognised and read when held in front of the reader The reading process is passive with a frequency of 13.56 MHz MIFARE keyfobs support multiple application areas that can be individually protected The unique badge number is printed on top of the keyfob Contactless credentials with MIFARE chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions

CEM DESFire contactless smart card comes with blank and unused memory keys that can be used for other applications. It also comes with a flexible filing system based on applications and files contained witthin the applications.

Keyscan HID HID-C1325 is a standard proximity card. Proximity cards and key-fobs need only be placed within proximity of their readers to activate the system. The technology is cost-effective and it is unaffected by dirty environments, weather conditions or strong magnetic fields.

The new key card offers a maximum range of up to 50m. The new triple-function Net2Air keycard operates as a normal  hands free token on doors equipped with a hands free interface and, by operating the keycard buttons, as a long range access card.

The miPass contactless smart card communicates using wireless technology with the reader.  The phase signal and the energy to power the card are transmitted via a high frequency signal from the reader to the card.  Data is then transmitted bi-directionally by this signal providing a fast and very efficient data exchange.  Quick transaction time, simple usage and robustness are the outstanding features of this card.  The card can transmit data over a distance of up to 10cm.

Used in conjunction with Readers and controllers. Read range varies between types of cards from 5 - 40cm. The cards and keyfob offer a passive, no-battery design allowing an infinite number of reads. Proximity Keyfob incorporates proximity technology into a device approximately the size of an automotive key. Can be programmed with up to 37 bits of Wiegand formatted information for universal compatibility with all Weigand reader applications.

PROX ISO cards have an antenna and PROX chip embedded The card is recognised and read when held in front of the reader The reading process is passive with a frequency of 125 kHz PROX cards are static credentials with a unique card number and a customer (or facility) number Contactless credentials with a PROX chip are ideal for installations with high-availability systems and where credentials may be exposed to abnormal conditions Reading ranges reach up to 12.5 cm depending on the readers used

Keyscan's Indala family of interchangeable FlexPass cards and tags are designed to withstand the tough rigors of the access environment. All readers, cards and tags are pre-configured for Keyscan 36 Bit wiegand output, offering off the shelf ordering. Indala readers are durable and weather resistant