Access Control Accessories  (1,151)

The Impressionist 01 Series door handle is a straight D pull handle.  These pull door handles are designed for aluminium, timber and glass door applications.  The Impressionist range of pull door handles are bold and modern in appearance, as well as being practical in everyday use. Manufactured in 32mm diameter, the look and feel is strong and robust, yet aesthetically pleasing to the eye. Available from stock in aluminium, stainless steel, polished stainless steel and a numerous range of painted nylon coated colours in the 02 and 05 Series; this range truly does make “an impression”.  Features Include Bold and Modern Appearance Strong and Robust Available in Numerous Finishes

The Impressionist 01 Series door handle is a straight D pull handle.  These pull door handles are designed for aluminium, timber and glass door applications.  The Impressionist range of pull door handles are bold and modern in appearance, as well as being practical in everyday use. Manufactured in 32mm diameter, the look and feel is strong and robust, yet aesthetically pleasing to the eye. Available from stock in aluminium, stainless steel, polished stainless steel and a numerous range of painted nylon coated colours in the 02 and 05 Series; this range truly does make “an impression”.  Features Include Bold and Modern Appearance Strong and Robust Available in Numerous Finishes

Produced in accordance with UL guidelines and is used for securely mounting and housing an AMC2 (Access Modular Controller) and a power supply unit 2 DIN rails Designed for indoor wall mounting It ensures a secure installation and housing of two AMC2 or two AMC2 extension boards, one power supply unit and two batteries The steel housing includes an LED for power indication, a tamper contact and pre-stamped knockouts

This cabinet is supplied with a mounting plate and tamper board. The input/output expansion boards are modular, designed to be mounted on the mounting plate in the following combinations: Up to 4x Gallagher HBUS 8 In Boards or Gallagher Door Modules, or Up to 2x HBUS 8 In 4 Out Boards, or 1x HBUS 8 In 4 Out Board and up to 2x HBUS 8 In Boards or Gallagher Door Modules

Linear's MCS109950 gate receiver is designed for use with automatic gate operators or systems where a remote antenna is needed. . Nearly all gate operators offer either 24 or 12 volts AC or DC as accessory power. The MCS109950 has a single relay and replaces three different Multi-Code gate receivers. 

Key Lockable robust metal enclosure Designed for Access Control installations House's all equipment required for up to 8 doors Space for 2 x 18Ah Lead Acid Batteries Low Profile design Size 595(L) x 512(W) x 95(D) 3 x 50x50mm conduit entry points 7 x 25mm round conduit entry points Discrete thru-wall cable entry via back panel Provision for dual front/rear tamper monitoring Includes Integriti equipment mounting plate Hinged Expansion Plate available (Part 999027)

10-way Quick-Connect output for Integriti Modules such as the 8 Zone LAN Expander, Intelligent LAN Access Module (ILAM) Ribbon cable output for Concept Modules, such as the Mini Expander, and the 2 Door Access Module Separate DC output connections (Screw terminals) Low-level AC Fail alarm output Low-level Battery Fail alarm output Low-level Trigger Battery Test input Small form factor Fused AC input and battery protection (4Amp) LED indication of Output Present, AC Fail and Reverse Battery Polarity Can be linked with a second 2Amp power supply to provide a 4Amp or dual-redundant power source Can be set to a 1Amp current limit 16VAC Input (A 3Amp transformer is required)

Key Lockable robust metal enclosure Designed for Access Control installations House's all equipment required for up to 8 doors Space for 2 x 18Ah Lead Acid Batteries Low Profile design Size 595(L) x 512(W) x 95(D) 3 x 50x50mm conduit entry points 7 x 25mm round conduit entry points Discrete thru-wall cable entry via back panel Provision for dual front/rear tamper monitoring Includes Integriti equipment mounting plate Hinged Expansion Plate available (Part 999027)

The Everswitch SBR4 27 mm illuminated switch is rugged, extremely durable, and with no moving parts. Switch is immune to ESD and generate no EMI or RFI. A power supply is not needed for switch operation.

2RU Sliding 19” Rack Mountable Drawer Suit 19" Rack with front and back rail mounts Adjustable 600mm Ball Bearing runners to suit rail spacings between 520 - 740mm Universal PCB Mounting Plate and Battery Holders Sturdy metal drawer with sealed base and welded corners Tamper monitored ventilated metal cover Rear Cable Tie Down Tray Supplied with ball bearing runners 3 x 2-Way Circular Cable Entry Knockouts, 35mm or 64mm Supplied with cable entry bushing Ethernet Connection - RJ45 Chassis Mount Mains Power Connection - IEC 240Vac Mains power connector - Fused Assisted Ventilation - Provision for 60mm panel mount fan Mounting positions for all Integriti Controllers, LAN Modules & UniBus Devices Mounting positions for all Concept 3000/4000/5000 Security System Controllers & LAN Modules (Excluding the Intelligent 4-Door Controller) House up to 2 x 7Ah 12V Batteries House up to 2 x 3A Ac transformers or 1 x 3A & 1 x 4A

The Everswitch SMA2 is a non-illuminated switch with 22.5 mm mounting diameter.

Everswitch SMF1 is a 16 mm switch. It is ideal for use in rough environments.

AMC2 enclosure with single din rail, power supply unit and pre-assembled cables Produced in accordance with strict guidelines and is used for securely mounting and housing an AMC2 (Access Modular Controller) and a power supply unit

Everswitch SBA2 is a 22.5 mm continuous and toggle piezo switch with no moving parts, 100% sealed, resistant to EMI and RFI . It is supplied with 12” AWG 24 wires or connector , in a wide range of dimensions.

Bosch APS-PSU-60 is a power supply unit with an integrated battery charging device, that supports 12 V/7 Ah, 12 V/14 Ah and 24 V/7 Ah batteries, with selectable 12 VDC or 24 VDC voltage output.

VdS 2119-compliant DIN-rail click system for easy mounting and replacement Tamper-detection AMC2 enclosure with single DIN rail and mountings for VdS 2119-compliant installation An AMC2 control panel within it may arm/disarm VdS-Class C intrusion detection systems

Mounting plate with four DIN rails for 19” racks 4 rack units/ 88 horizontal pitchs Up to four rails for AMC devices

Mounting plate with two DIN rails for 19” racks 4 rack units/ 88 horizontal pitchs Battery bracket Srew socket for PBC-60 Cable kits to connect the power supply

Produced in accordance with UL guidelines and is used for securely mounting and housing an AMC2 (Access Modular Controller) and a power supply unit 1 DIN rail system for easy mounting and replacement Designed for indoor wall mounting It ensures a secure installation and housing of one AMC2 or one AMC2 extension board, one power supply unit and two batteries The steel housing includes an LED for power indication, a tamper contact and pre-stamped knockouts

Everswitch SML2 is a 22.5mm illuminated switch with 12” AWG 24 wires, in a wide rang of dimensions.

Everswitch SMF6 is a 16mm non-illuminated piezo switch with IP68 protection. It is ideal for use in rough environments.

A maintenance‑free, sealed lead‑acid, standby and auxiliary power source that provides long service life and dependability Suitable for supplying backup power for fire, security, and access control systems during AC power failures Fully rechargeable Maintenance‑free

The Everswitch SBR2 22 mm illuminated switch is rugged, extremely durable, and with no moving parts. Switch is immune to ESD and generate no EMI or RFI. A power supply is not needed for switch operation.

Everswitch SML3 is a 28.5 mm illuminated switch with 12” AWG 24 wires, in a wide rang of dimensions.

Everswitch SBA1 is a 22.5 mm continuous and toggle piezo switch with no moving parts, 100% sealed, resistant to EMI and RFI and needs no power supply. It is supplied with 12” AWG 24 wires or connector , in a wide range of dimensions.

Everswitch SBF1 18.6 mm switch is sturdy, long life, with no moving parts, 100% sealed, resistant to EMI and RFI and needs no power supply.

2RU Sliding 19” Rack Mountable Drawer Suit 19" Rack with front and back rail mounts Adjustable 600mm Ball Bearing runners to suit rail spacings between 520 - 740mm Universal PCB Mounting Plate and Battery Holders Sturdy metal drawer with sealed base and welded corners Tamper monitored ventilated metal cover Rear Cable Tie Down Tray Supplied with ball bearing runners 3 x 2-Way Circular Cable Entry Knockouts, 35mm or 64mm Supplied with cable entry bushing Ethernet Connection - RJ45 Chassis Mount Mains Power Connection - IEC 240Vac Mains power connector - Fused Assisted Ventilation - Provision for 60mm panel mount fan Mounting positions for all Integriti Controllers, LAN Modules & UniBus Devices Mounting positions for all Concept 3000/4000/5000 Security System Controllers & LAN Modules (Excluding the Intelligent 4-Door Controller) House up to 2 x 7Ah 12V Batteries House up to 2 x 3A Ac transformers or 1 x 3A & 1 x 4A

WayPoint17A provides 24VAC or 28VAC distributed via one or two output(s) for powering CCTV Cameras, heaters and other video accessories.

WayPoint30A provides 24VAC or 28VAC distributed via one or two output(s) for powering CCTV Cameras, heaters and other video accessories.

Everswitch SMF5 is a 18 mm switch with IP68 protection. It is ideal for use in rough environments.

Altronix ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 rated PTC protected power-limited auto-resettable outputs rated at 2.5A each. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM8CB will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

A 12 V sealed lead‑acid battery that acts as a maintenance‑free standby and auxiliary power supply Provides long service life and dependability Suitable for supplying backup power for fire, security, and access control systems during AC power failures

This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

The Everswitch SMA1 is a 22.5 mm non-illuminated switch with IP69 protection.

Everswitch SBS1 is a 19.5 mm switch with 12” AWG 24 wires or connector. The switch comes with 10 W breaking capacity and 200mA switching current.

Everswitch SBS2 is a 19.5 mm switch with no moving parts,100% sealed, resistant to EMI and RFI and needs no power supply. It is supplied with 12” AWG 24 wires or connector , in a wide range of dimensions.

WayPoint10A provides 24VAC or 28VAC distributed via one or two output(s) for powering CCTV Cameras, heaters and other video accessories.

This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 24VDC fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

This unit distributes and switches power to access control systems and accessories. It converts a 115VAC 60Hz input into sixteen (16) independently controlled 12VDC and 24VDC fuse protected outputs. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.