Access Control Readers  (1,387)

The i-Button slim wall reader for flush mounting, has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader. The wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

AMAG Javelin S874  is a smart card reader without keypad for integrated access control. The attractive, contemporary black and silver finish is designed to complement any office or building environment.The Javelin S874 reads NXP MIFARE®, MIFARE® Plus, MIFARE® DESFire and MIFARE® DESFire EV1 smart cards, in addition to PIV, TWIC and FRAC cards. The Javelin S874 is designed for use with the Symmetry multiNODE range of controllers and is compatible with all versions of Symmetry software.

Biometric, Keypad Integrated

TruPortal TP-CTX is a 2 board expansion enclosure with lock and keys. Power supply is not included and installs upto 2 TP-ADD. It is a standoff to mount boards and tamper switch.

Biometric

BPT GB/WKM900 is an Impro weigand mullion keypad reader

BPT GB/IBT902 is an Impro B-SHO enrollment reader

GB/SMA100 is a Sagem Biometrics Reader and supports 500 users with 2 templates each and connects to a TCP/IP network.

BPT GB/JDUAL is an Impro Biometrics/Mifare dual function reader

BPT GB/IBT910 is an Impro B-SHO fingerprint reader

GB/SMA500 is a Sagem Biometrics Reader. Supports 3,000 users with 2 templates each and connects to a TCP/IP network.

GB/ISL903 Impro Touch - Sagem biometric integration providing a single, seamless database for enrolling the fingerprint and access control permissions

BPT GB/SMSO300 is an IMPRO SAGEM biometrics enrolment reader

13.56 MHz proximity reader compatible with access controllers with Wiegand interfaces Fully compatible with the Bosch Access Management portfolio, including the Management Software Systems (BIS/ACE, AMS and APE), the Access Modular Controller (AMC2), and the MIFARE and iCLASS credential portfolio Support of multiple card technologies (iCLASS SE, iCLASS Seos, MIFARE DESFire EV1) Quick reading response for high performance level The use of NFC on mobile phones to set up the communication with the reader enables mobile phones to be used as access credentials IP55 rating allows both indoor and outdoor installation

The contactless SALTO Modular wall reader with key pad is a wall reader that includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. The wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP46 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

The SALTO in room energy saving device (ESD) helps to save up to 65%* of a hotel room or student dorms electricity consumption and unlike standard (magnetic stripe) energy savers, only authorised SALTO key cards will switch on the lights. Any other card (frequent flyer, business card etc) or other SALTO cards belonging to other rooms, will not activate the lights. It is also available in a connected on-line version, which as well as energy saving indicates in real time the presence of guests or staff in a room, logging the information directly into the hotel PC. When a guest enters the room and inserts their card into the ESD it switches on all electrical equipment. When staff enter the room for cleaning or maintenance, the ESD recognises their staff card and switches on only the electrical equipment they need to do their work.

The Gallagher Mifare USB Encoder is used for encoding mifare cards through USB.

Created for the Hotel environment, the SALTO desktop reader is designed to read data from the R&W carriers and send it to an external device, usually a Point of Sale terminal. This can be useful in a PMS environment and works with industry standard protocol. Main features and benefits: Configuration by dip switches to control data to be read and the interface with the external device. The interface with the external device can be RS232, OMRON and WIEGAND. Current required: 12v DC source (included). Connection to the external device: 9 pin D-type female connector (to be connected to serial port). Data read by the desktop reader: ROM CODE, TRACKS ON KEY, WIEGAND CODE.

DSC MAXSYS_Readers supports a wide range of 26-bit Weigand readers: Polaris™, ioProx™, Shadowprox™, HID and Kantech XSF Technologies.

The SALTO encoder is a compact device which reads, encodes and updates cards. It also permits automatic key issuing in large and complex properties, enabling users to carry out key assignment simply by having the encoder in a busy area where the user can get their card assigned just by presenting a card to the reader without any assistance required from the access control manager. Main features and benefits: ID technologies available: Mifare, DESfire, DESfire EV1, Mifare plus, Legic, HID iClass. Current required: 12 v/ 500mA (adaptor included). Connection to the PC: USB or Ethernet/Wifi. USB encoders do not usually require an external adaptor.

Control unit for 1 door and 20 coded memory. Individual programming and total delete facility. 2nd reader option. Serial communication between reader and CPU. 2 locks time setting. Works with VX KEY -unique coded key with 48 Bit serial number.

Control unit for 4 main doors +100 apartment doors and 1000 coded key memory. Individual programming and total delete facility. 2nd reader option. LCD display. Serial communication between reader and CPU. Alarm output facility,4 levels time band facility, printer output facility. PC RS-232 interface plus software disk provided. Real time clock. Works with VX KEY -unique coded key with 48 Bit serial number.

Control unit for 2 doors and 100 coded key memory. Individual programming and total delete facility. 2nd reader option. Serial communication between reader and CPU. Available in a standard 9 module A type DIN box (157.5mm). Works with VX KEY -unique coded key with 48 Bit serial number.

The WRM6000 is the SALTO Contact Smart Card wall reader. It reads encrypted data from the carriers and then communicates it to the control units. It also allows for updating of the carriers via the SALTO Virtual Network technology. The WRM6000 features a built-in heater making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

These door entry panels come complete with a 40 code (25 switchable) programmable keypad built in and will work with any SRS door entry equipment.  Larger panels (ie with more buttons) are available in both BS316 stainless steel and polished brass.  Choice of stainless steel (BS316) panels from 1 button to 10 buttons.  These flush mounting door entry panels have hinged front plate, terminal strip to simplify the button connections and built in speaker unit.  The front plate is secured to the back box with 4 x SRS stainless steel tamper resistant screws.  Panels are not engraved.  The keypad has 40 x 4 digit codes and is user programmable.

Parabit 300-30014 is a key override swtich.

The USB desktop reader connects directly to a standard USB port and when using Windows XP/2000 requires no additional drivers.

Paxton Access 310-300 Proximity reader ‘in’ and ‘out’ clips can help users identify which readers are for ‘tapping in’ and which are for ‘tapping’ out to establish when they are leaving the site.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

Parabit 200-10142 is a ACS card reader surface mount swipe with Piezo buzzer and tamper switch for interior and exterior use.

Quick installation, hardware is automatically detected by the system Each reader coverter supports two Paxton readers Supports the transition from an existing Net2 system to a new Paxton10 installation

125 kHZ Wiegand proximity reader and security keypad Designed to be mounted on a mullion Offers up to a 6" (152.4 mm) non-contact read range with clamshell cards The keypad allows users to enter pin codes for entry, either on their own or in conjunction with a card swipe

The ECM (Ethernet Communication Module) is a serial to ethernet converter that enables CEM serial communication devices (such as the S600s reader range, InfoProx reader and the DCM 150), to connect to the AC2000 central system via an Ethernet LAN.  Dimensions: 140 x 110 x 35mm.  Operating temperature: -10°C to 55°C.  Weight: 0.2 kg.  

BQT Solutions miPASS 3 smart card and reader solution provides an enhanced level of security through the use of diversified keys. miPASS 3 readers offer secure DESFIRE 3DES technology.

CEM RDR/611/10X is a card reader with LCD display, keypad and onboard database.

The panel mount reader is suitable to use with most access control systems that accept a clock and data input. It is designed to fit into door entry panels. It can also be fitted into posts to control car park barriers. It fits behind a reader cut out of an industry standard 40mm size.

Parabit 200-10103 is an optional 2nd card reader board for ACS-1E control panel.

The LNL-BIO-007-ENC recessed enclosure is designed to mount any of the BIO-007 series readers.  Dimensions: 286 x 133 x 83.  2A continuous supply current at 12 VDC.

The ievo® desktop registration units manage the fingerprint enrolment process remotely. Using a USB connection, the units plug directly into a PC, simplifying registration with an interface for effective enrolment. Additionnally, the registration units take away the need to enrol users via active or in-use product - an essential solution for a high traffic system. Both ultimate™ and micro™ registration units are ideal for the ultimate™ reader head or a mixture of both ultimate™ and micro™ readers. The micro™ unit is only to be used with the micro™ reader head.

Reads proximity cards/tags Enters directly into ATRIUM database No driver required Works with Win XP, Windows 7, Windows 10 Portable unit for multi-site use