Access Control Readers  (1,387)

Gallagher T12 access control reader with unparalleled reader security is equipped with a new high speed RS-485 communications protocol, HBUS. It is RoHS compliant and designed for minimal power consumption. 

Combines Bluetooth Low Energy (BLE) with conventional card reading capabilities for integrated access control Multi-tech reader (LF, HF, BLE) that provide the widest compatibility with multiple credential types Available with various comms interfaces: 20mA (MCLP) Designed to work across the whole Symmetry product range but also supports standard/open communications protocols for use with other access control systems Works with most Android or Apple smart phones Reads MIFARE, DESFire, EV1 & EV2, LEAF, 125khz proximity cards Configurable reader signal strength, can read Bluetooth BLE credentials from close-up and long range Suitable for indoor or outdoor installation Integrated door pre-held warning buzzer Light bar feedback for card accepted or rejected Optional PIN for higher security

Combined magnetic stripe reader and door controller. 8 entry modes. Alarm, tamper and unlock relays. RTE switch and Exit reader inputs. Slectable door release times. Integrates 10 door systems served by Inova PrintServer. Integrates with PC-based access management systems. Automatic time scheduling of locking and unlocking of doors when networked. Stores up to 1000 time stamped events. Time schedules unaffected by power interruptions. RS485 data link. Accessories available - Alarm panel interface (CardPoint) ; auxiliary card reader ; door strike inhibitor board ; user cards (10 or 50).

The S610e supports onboard card reading technologies for 125 KHz Proximity, 13.56 MHz MiFare and PicoPass, as well as multi technology version to support Proximity + MiFare.  Other technologies can be supported using the two available onboard Wiegand connections. Easy to Install. 

GB/MDR900 is a multi-discipline keypad reader capable of reading Impro Wiegand and Mifare cards as well as HID, iClass, Marin, Philips Mifare, Philips Desfire and Sony Felica cards. It is indoor or vandal resistant outdoor use, in mark resistant 304 stainless steel cover. It supports for both 125Khz and 13.56MHz tags and compatible with 3rd party systems using the Wiegand 44 bit output. It includes anti-tamper switch.

Readers with 2 Formats.  Fully potted IP-65, 10-wire, contacless 125 KHzReader with Optic Tamper.  Can be programmed to work as Wiegand 26-Bit and Clock & Data formats.  Meets UL-294, ETSI, CE, FCC Standards. Lifetime Warranty.

The PIEZO models can be easily disinfiected in areas where hygine is important, and has an expectionally long life due to no moving parts.  The unit resists the elements such as glue, oil, rain, ice, snow.  Ideal for hopsitals, industrial and commercial application.

The vandal proof reader is for use with Switch2 and Net2 systems.  The barrel-like construction of the reader means that it can be buried in a wall.  This means that it is ideal for use in vandal prone areas where malicious damage could be a problem.  Black and white caps are supplied with the reader.  IP67 rated - suitable for external use.

Proximity, Standalone, Wall mount, 76.2 mm, LED, Black, Wiegand Interface, 5 ~ 16 V DC, 167 mA, 104 x 44 x 25, 204, -35 ~ +67

Dual Core high speed CPU, large memory support 1,000 FP Templates Less than 0.5s rapidly verification speed (1:N) 1.3Million Camera capture verifier’s photo for event backup Internal Webserver for device quick set and records check  TCP/IP, WIFI, 3G and RS485 multi communication modes Dual Relays both for door control and linkage with alarm system Provide complete Development Kit to build exclusive application platform(SDK, EDK, SOAP)

The SIFER Card Enrolment Station is designed to conveniently allow SIFER cards to be enrolled into an Inner Range Integriti system at a computer workstation using the Integriti software. This allows system administrators to enroll new SIFER cards into the Integriti system without the need to physically enter the card data into the system.

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic and DESFire EV1 cards and keyfobs and CSN of ISO14443A credentials Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

The NX-1710E Single Door Control Module enables NetworX panels to interface with most popular Wiegand readers. Ideal for a range of commercial and residential applications, Wiegand readers are widely available and offer a large selection of reader types. With the NX-1710E, NetworX panels can support a door control event log and scheduling such as open/closed/holiday.

Javelin S870 is a proximity card reader without keypad for integrated access control. The attractive, contemporary black and silver finish is designed to complement any office or building environment.

PAC-20762 is a Oneprox UBS desktop reader. The PAC Oneprox PC Interface Kit is designed to ease the task of enrolling credentials. An enrolment desktop reader connects via an interface kit to a serial port on the host administration PC, and the ID device numbers are read directly into a database.

External LED Control.  External Buzzer Control.  Indoor / Outdoor Operation.  Solid Epoxy Potted.

Long Range, Proximity, Standalone, 50 mm, LED/Beep, Black, Wiegand Interface, Clock-and-Data Interface, 9 ~ 16 V DC, 100 mA, 102 x 102 x 20, 270, -20 ~ +55, 0 ~ 95

Low cost infrared reader. Cards are read by swiping through slot in either direction at speeds between 100 and 1500mm/s. Requires the use of a PAC wiegand interface when used with the Easikey 1000 and the PAC 2100/1100 controllers. year guarantee against electronic failure.

Anviz AFOS Optical Fingerprint Sensor  Mini USB Slave communication

A stylish and fully featured proximity reader from TDSi. EXprox offers a high quality mullion mounted reader available in robust ABS plastic or vandal resistant stainless steel housings with excellent read range.

Magnetic stripe for use with all INOVA controllers. Suitable for weather resistant external or internal applications or for controlled exit.

AMAG Javelin S874-KP is a smart card reader with keypad for integrated access control. The Javelin S874-KP reads NXP MIFARE®, MIFARE® Plus, MIFARE® DESFire and MIFARE® DESFire EV1 smart cards, in addition to PIV, TWIC and FRAC cards. It uses secure, bi-directional, pseudo-random supervised MCLP communications to the multiNODE controller. Wiegand communication is also supported between the card reader and controller.

Rosslare recently launched two new versions of the hardy yet stylishly designed anti-vandal smart card reader.  The AY-Q6250 and its keypad version - the AY-Q6350 introduce a patented, industry first - Mifare technology encased in a metal body, combining smart card technology with an anti-vandal metal shield.  Both units read the Mifare® ID Format through 13.56 MHz a remarkable range up to 45mm (1.8").  Find out why they will fare with the felons.The affordably priced AY-Q6250 Anti-Vandal Mifare® Contactless Smartcard Reader version is the secure way for a simple and reliable smart card upgrade.  It supplements all the advantages of Mifare® technology to any standard access control system and comes with seven programmable output formats.The elegantly designed, highly secure AY-Q6350 Anti-Vandal Mifare® Smartcard Reader version comes with stylish blue backlit keypad.  It is the latest addition to our Mifare® Card Reader series with a noteworthy ability to read Mifare® card serial number (CSN) from all ISO-14443A-3 type cards.Ultra resilient - Being epoxy potted, these water-resistant and vandal resistant units are fully sealed within an all-metallic housing, for improved performance in all weather conditions.Ultra compatible - The readers support seven programmable proximity card transmission formats, 26 to 40-Bit Wiegand or Clock & Data protocols.  They feature a 6-wire cable interface for power, data, LED control input, and tamper status.Ultra secure - The AY-Q6350 provides extra security through a password-protected menu, an optical sensor for cover and wall tamper detection and a more secure "PIN plus card" mode.  The unit also features a local programming menu with various programmable modes.Ultra stylish - The AY-Q6350 unit is ideal for installations where style, security and functionality are topmost priorities.  The Blue Backlit 3x4 keypad also features a doorbell key function.

GB/MDK900 is a multi-discipline reader capable of reading Impro Wiegand and Mifare cards as well as HID, iClass, Marin, Philips Mifare, Philips Desfire and Sony Felica cards. It is indoor or vandal resistant and in mark resistant 304 stainless steel cover. Support for both 125Khz and 13.56MHz tags and compatible with 3rd party systems using the Wiegand 44 bit output

Readers with 2 Formats.  Fully potted IP-65, 10-wire, contacless 125 KHzReader with Optic Tamper.  Can be programmed to work as Wiegand 26-Bit and Clock & Data formats.  Meets UL-294, ETSI, CE, FCC Standards. Lifetime Warranty.

RF245, a 2.45GHz Long Range reader is uniquely designed for installations incorporating parking systems, with enhanced security via encryption and mutual identification.  You may choose 90° one directional antenna or omni directional antenna depending on your preference.  Multiple tags can be read with the blink of an eye.  Armed with IDTECK patented card algorithm, it provides high security to your long-range solution with an affordable price.Long-range RFID active cards have always been troublesome with short battery life and no option to replace battery.  With the IDA245 RFID active tag, the inability to replace the battery and the battery life no longer poses a challenge.  The CR2025 battery can be replaced through the slot at the bottom of the card.  Also, site code and ID numbers may be programmed using PRG3000. Applicable areaPerfect for long range parking controlVehicle trackingAsset controlPersonal trackingKey featuresLong read range - 3m(10feet), 5m(17feet), 10m(34feet) with IDA245 tagSimple to use - Able to connect directly using bargate outputMultiple purpose - Parking, vehicle control, asset control and personal trackingOutdoor capability - 100% weather resistance makes it perfect for outdoor useUser-friendly - User programmable site code and ID numbers using PRG3000  Life time / Replaceable battery - 3 years battery life with replaceable CR2025 battery

Readers with 2 Formats.  Fully potted IP-65, 10-wire, contacless 125 KHzReader with Optic Tamper.  Can be programmed to work as Wiegand 26-Bit and Clock & Data formats.  Meets UL-294, ETSI, CE, FCC Standards. Lifetime Warranty.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

PANELgarde from TDSi is a versatile reader for door entry panels with a square or circular cut-out offering a wide range of output formats and suitable. Fully encapsulated, PANELgarde is suited for the harsh environments such as high RH/condensation and extremes of temperature that can be experienced inside a door entry panel.

The multi-functional intelligent access terminal that is revolutionising the security industry emerald from CEM Systems is an intelligent multifunctional IP access terminal that provides more at the door. The first of its kind, emerald is a Touch screen Reader, Door Controller, VoIP Intercom and System Terminal all in a single box. The innovative touch screen LCD greets cardholders by illuminating as they approach, providing a user friendly security experience. emerald’s IP65 rated polycarbonate enclosure and custom LCD touch screen is both dust and water resistant, meaning that it can be used both inside and outside. For enhanced security, emerald offers a keypad for additional PIN verification, and for an added layer of security a scramble keypad can be implemented. Product feature Intelligent Touch Terminal IP Reader & Controller in one - with both functionalities in one device, emerald communicates directly to the AC2000 host server Fully integrated Voice over IP intercom functionality Remote Applications – displaying real time access control information to cardholders Scramble keypad option for Personal Identification Number (PIN)

Readers with 2 Formats.  Fully potted IP-65, 10-wire, contacless 125 KHzReader with Optic Tamper.  Can be programmed to work as Wiegand 26-Bit and Clock & Data formats.  Meets UL-294, ETSI, CE, FCC Standards. Lifetime Warranty.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

Addition to installed readers for biometric security. Simply connect to any G-Prox II reader and any MONITOR ISM Door controller. Fully integrates with MONITOR ISM Director V4.0. Fast enrollment of fingerprints -

Long Range, Proximity, Networkable, IP65, Mullion mount, 100 mm, LED / Beep, Grey, Wiegand Interface, 12 V DC, 180 mA, 23 x 46 x 122, 160, -35 ~ +65, 10 ~ 90

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.

The LPSP-6820 outputs weigand and RS-232 formats and is compatible with all access control systems.

TDSi 5002-0440 is a stylish and fully featured MIFARE® smart card reader from TDSi. These readers are extremely cost effective MIFARE® serial number readers available housed in a robust, fully encapsulated ABS enclosure allowing it to be mounted both indoors and out. Compatible with ISO 14443-A standard for 13.56 MHz contactless smart card technology.  

Durable plastic suitable for internal or external use. For use with the PAC wiegand interface. . One year guarantee against electronic failure.

The Hirsch ScramblePad keypad/reader provides a high security approach to access, because the credential (ID code or PIN number) cannot be accidentally shared with, or stolen by onlookers.  Each numeral is randomly scrambled to a new position each time the START button is pressed, so a bystander cannot see the code, learn the pattern, nor identify telltale wear marks on certain keys.  Features: Scrambling Digits, On-board microprocessor, viewing restrictors, optional proximity reader, encrypted communication, audible feedback.

500 DPI optical fingerprint sensors. Built in MIFARE Classic and DESFire EV1/EV2 card readers into recommended models for Card Only, Card + PIN, Card + Biometric or Biometric only. Individually adjustable false acceptance rates for each reader. Outdoor and false finger detection models available. Used in conjunction with the Gallagher HBUS encrypted modules, the IDEMIA integration offers Ethernet encryption to the terminal, so the secure matching decision at the reader is never compromised. Contactless biometric technology introduces high speed, accurate and hygienic access control to environmentally sensitive sites.