Access Control Readers  (1,387)

PCSC AT1G34-200 Standard is an 3 x 4 Stand Alone Single Door keypad that utilises an innovative patented Piezo technology. The keypad is rugged, sealed, tamper, vandal and weather proof. Their non-moving, one-piece construction sets them apart from any alternative.

RS485/OSDP and 26 Bit Wiegand interface Supports the data record of Bosch coded MIFARE classic and DESFire EV1 cards and keyfobs and CSN of ISO14443A credentials Equipped with keypad Three LED indicators and a beeper give clear feedback to the user during operation IP65 rated for indoor and outdoor use Wall or mullion mount Tamper switch

Vandal resistant biometric reader Up to 50,000 fingerprints via control board Powerful multi-spectral imaging (MSI) Visual and audible feedback IP65-rated ISO PAD Level 1 compliant when spoof detection is enabled

The Symmetry S843 is a contactless smart card reader with LCD and keypad designed for government agencies adopting federal personal identity verification standards including FIPS 201. In addition to FIPS 201 the Symmetry S843 also reads standard NXP® MIFARE® and MIFARE® DESFire, smart cards.

The panel mount reader is for use with Switch2 and Net2 systems.  It is designed to fi t into door entry panels.  It can also be fi tted into posts to control car park barriers.  It fits behind a reader cut out of industry standard size.  Designed for use in audio/video entry panels.  Fits neatly behind a 40mm square aperture.

Optica® is a combination 125 kHz proximity reader and keypad. The unique and innovative design keypad has no moving parts to wear out or sabotage and is subtly backlit with fashionable blue LEDs. Optica® is available with either tough ABS plastic covers or as a vandal resistant (VR) version in a contemporary stainless steel housing.

Ideally suited for hotel and student accommodation applications, these readers feature an ergonomic design featuring a blue backlit card slot. These readers have the distinct advantage that the controlled circuit will only be energised when a card of the correct technology is inserted. The same contactless proximity of MIFARE card used for door access can be used.

The LPKP-6840 offers dual functionality and superior read range.  It is designed to mount on a single-gang electric wall box or on the surface of an interior or exterior wall.  

Vandal resistant biometric reader Up to 50,000 fingerprints via control board Powerful multi-spectral imaging (MSI) Visual and audible feedback IP65-rated ISO PAD Level 1 compliant when spoof detection is enabled

Single Reader Interface (SRI) module for business access control solutions.  Access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communications are supported.  Lock, unlock, and facility code offline access modes are supported on all readers connected to the SRI.  Each SRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

IFSEC 2010 was a great success for the Paxton team. The UK's market leading access control manufacturer showcased a range of product innovations to the delight of visitors to their stand. Trish Bambury, Brand Manager at Paxton said: "It was a great exhibition for Paxton, with both new and existing customers enthusiastic about our products and service. We are already looking forward to next year!" The real highlight of the show was Paxton's fantastic LCD reader, which wowed delegates with its sleek, modern LCD screen. The reader, that displays different images when a token is presented and access is granted or denied, was a hit with security professionals. Visitors were keen to discuss different ideas for the reader and suggest new images to upload to the LCD screen - it really got people talking. The busy Paxton stand, situated in Hall 5, offered a warm welcome to all visitors. The bright, open plan layout really stood out against competitors' stands and got an excellent response from IFSEC 2010 attendees. Paxton's professional and friendly team also received some great positive feedback on the unwavering levels of care and support they offer to installers and customers alike. Their fantastic UK technical support, free installer training and five year, no quibble product guarantee are just some of the things that keep their clients coming back time and time again. One visitor said: "As usual I was given excellent service from Paxton. The team are knowledgeable and patient and they gave me the answers that I needed."

Compact access terminal (surface-mounted) with reader unit for proximity cards and keypad for PIN code entry and configuration Self-sufficient operation Transaction memory for a maximum of 1000 transactions; transaction consists of personal ID, time, date and type of transaction Maximum of 2000 personal IDs Configurable PIN code block after a specified number of incorrect entries Quick personal activation by showing card Alarm via auxiliary relay It is possible to connect it to an access controller via the Wiegand interface

Patented scrambling display & viewing restriction.  High intensity display for installation in high ambient light environments.  Includes audible annunciator, 4 status LEDs & physical tamper switch.  Moisture, dust, dirt and ESD resistant.  Includes Standard (non-custom) MATCH function for 1 or 2 readers.  Installs in Hirsch mounting boxes.  Use MB5, exterior mounting box for exterior applications.  2 MATCH connectors with 6" pigtails.  UL Listed.  CE.

Parabit 200-10092 is a SkimGard insert reader with flush mount design and stainless steel casing. It has a weather resistant design and is made of black andised aluminium bezel.

Works with Net2 or Switch2 Designer reader to match the interior of buildings 3 standard inserts available 3 bezel styles available Drawing provided to allow for custom inserts

AMAG Javelin S870-KP is a proximity card reader with keypad for integrated access control. The Javelin S870-KP is designed for use with the Symmetry multiNODE range of controllers and is compatible with all versions of Symmetry software. The card reader keypad is backlit for ease of use and power saving modes can reduce the lighting level when the card reader is not in use.

Proximity, IP66, Panel mount, 35 mm, multi-colour LEDs, Blue / Grey, < 100mA, 83 x 60 x 16, 100, -20 ~ +60, Indoor / Outdoor weather resistant

Combining a display screen, support for both MIFARE DESFire and mobile transactions, secured behind OSDPv2’s data protocol, makes 8 CD 2.0 MI D Pin a remarkably flexible RFID reader. 8 CD 2.0 MI D Pin’s display simplifies any subsequent user interactive task initiated by secure identification (e.g. payment, after-hour library transactions, etc.). Its combination of display, keypad, function keys menu and robust menu customizability make it a powerfully flexible platform for securely accepting and transmitting users‘ specified responses. This makes 8 CD 2.0 Pin D ideal for meeting a wide range of tasks, user options and inputs, whether they identify by conventional card or mobile phone.

AMAG Symmetry 823-AG is a contactless smart card reader designed for government agencies adopting federal personal identity veri? cation standards including FIPS 201. The Symmetry 823-AG reads both NXP MIFARE® and MIFARE® DESFire smart cards in addition to any badge based on FIPS 201 Standards such as TWIC, FRAC, PIV or CAC credentials. The Symmetry 823-AG can simultaneously support two different card types/formats (e.g. non-encoded MIFARE and smartMAX encoded MIFARE DESFire, or non encoded MIFARE and smartMAX encoded MIFARE). The reader is automatically configured to accept the first two card types/formats presented.

RS485 network speed.  Operating voltage of 12 V DC.

EXprox 2K is a range of high-performance contactless proximity readers from TDSi. EXprox 2K is designed to be mounted in a standard electrical back-box making for a neat and simple installation.

The standard proximity reader offers reliability in an easy to install package and smart styling that blends easily with any decor. Designed to be surface mounted or attached to a standard electrical back box, the reader provides a neat installation choice for both new and refitted buildings and is available in a black finish. Its built-in sounder can be programmed to issue a local alarm when a door is left open or forced.

PCSC PR-739 is a proximity reader that offers users top quality proximity reader-and-card technology, one of the best values available today. This product line, featuring a wide variety of products, includes proximity readers in assorted sizes for mullion, single gang box or wall mountings. All PCSC proximity readers are potted in UL-approved materials for durability in harsh exterior operating environments. it is designed for outdoor applications such as parking lots, or indoor applications such as asset monitoring and offers multi-tag capability.

Lenel's LNL-BIO-007 access reader is durable, dependable and competitively priced.  Designed for indoor or outdoor use, the reader combines three forms of authentication: proximity reader, PIN pad and fingerprint sensor.  The PIN and fingerprint authentication are standard; the proximity reader is optional.  All three reader modes can be configured to support timezone control.  The BIO-007 transmits a credential number to the Intelligent System Controller through a Wiegand interface.  The ISC then delivers the fingerprint template(s) to the BIO-007 through the LNL-500B Biometric Gateway and matching is performed within the BIO-007.  The results of the match are then returned to the Gateway for appropriate action and reporting to OnGuard. The indestructible keypad is based on BaranTec's patented Piezo Switch technology.  The power-driven Bioscrypt fingerprint sensor utilizes a powerful DSP processor.  Unlike other biometric products, this sensor is hidden until a valid credential and/or PIN is presented.  Then the fingerprint sensor door opens.  After verification occurs, the fingerprint sensor door closes into a secure vandal-resistant position. Features and functionality: 12 VDC power supply @ 1.8 amps Three factors of authentication: card, PIN, fingerprint Data output: Wiegand Data 1/Data 0 Biometric output: RS-485 Keypad interface: 8-bit burst Keypad layout: 4 across & 3 down Brushed aluminium finish, also available in other finishes Vandal-resistant design Weather-resistant housing Three LEDs for reader status Audible indicator buzzer 24-month warranty

DESFire reader with 2,4 inch colour display Display is sunlight readable Secure and flexible new generation reader technology, highly configurable Convenient mechanical keypad with raised keys, freely programmable function keys Provides more detailed feedback about reading events (e.g. access granted / access denied) Greater user interactivity (via keypad and function keys) Supports OSDP v.2.1.7

Use with Switch2 or Net2 Reads up to 100mm with proximity cards Low profile - less than 16mm deep Simple mounting IPX7 rated - suitable for external use

The EM4100 reader is suitable to use with most access control systems that accept a 26 bit Wiegand input. The reader is supplied with a choice of black or white fascias. Additional fascia colours are available if required.

The CEM S610 Exit Reader features two changeover relay outputs to activate door strike or other equipment. It is also easy to install and is available with integrated reading support for 125 kHz HID Proximity, 13.56 MHz smartcard technology including DESFire, Mifare, HID iClass, and PicoPass.

Reader with beeper and multi-coloured LED display Wiegand output for 125 kHz card technology (EM) Indoor and outdoor mounting

Working with the Aritech ACC-4 controller this system is configured with a buiit in keyboard. Power consumption: Indoor: 20mA Outdoor: 85mA

This mobile-compatible MIFARE DESFire reader, in addition to conventional MIFARE tags, can also transact Smartphone credentials over Bluetooth. This reader readily transacts with Idesco ID mobile app, but developing your own mobile access app for it is also an available option. Idesco ID app seamlessly responds to any of this reader’s three assignable security levels: 1. hands-free access (reading distance from a few inches to 30 ft from the door), 2. door is selected in the app, 3. phone’s own security lock must be released to access door. Like other Idesco readers, 8 CD 2.0 MI is available in several housing options with or without pin pad, many of which are vandal-proof and suitable for outdoor siting.

Supports PIN + CARD credentials.

For both readers there is an optional KeyTag and they can be custom configurised.  LCD screen  for 2 lines x 16 Characters.

Self contained single door access control for 200 users.

Optional keytag.

Support for multiple card technologies including: MIFARE DESFire EV1®,MIFARE DESFire EV2®, MIFARE Plus® and MIFARE Classic®, as well as optional 125 kHz proximity and Bluetooth® wireless technology Field upgradeable software Secure reader authentication and encryption of data communications with HBUS  Upgrade software in situ to keep your system up to date with the latest technology developments. Protection from extreme environmental conditions Environmentally friendly – RoHS compliant and designed for minimal power consumption

The Symmetry S849 is a contactless smart card reader with LED and keypad designed to read NXP® MIFARE® and MIFARE® DESFire smart cards. MIFARE DESFire operates at a maximum distance of 2” (50mm) and in accordance with the international standard ISO 14443, perfectly meets mid-end segment needs including security and costeffectiveness.

Both can be custom configurised for output protocol.

Smart Card, Standalone, IP67, Surface mount, 20 ~ 60 mm, LED / Beep, Silver & Charcoal, Wiegand Interface, 12 V DC, 140 mA, 140 x 45 x 32, ~25 ~ +65, 0 ~ 90