Access Control Readers  (1,387)

Both readers can be custom configurised for output protocol.

CEM RDR/612/101 is an exit card reader designed for use as part of an integrated on-line access control system. It is an extension to the master reader, providing a combined total of features at the point of entry. It also features contactless card presentation with optional Personnel Identification Number (PIN) for two stage authentication.

PAC-20073 Oneprox Mullion offers a traditional look with reliability, consistent read range and low power consumption in an easy-to-install package. With an attractive, unobtrusive design and charcoal grey colour, it is designed to mount on either a door frame (mullion) or any flat surface. It is ideally suited to locations indoors or outdoors that require a reader with a small footprint.

Proximity, IP66, 60 mm, Bi-colour LED, Yellow/Black, < 100mA, 100 x 100 x 14, 400, -20 ~ +60, 0 ~ 85, vandal resistant

CEM RDR/610/105 MiFare card reader designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

Supports 4-Digit to 8-Digit PIN, and Prox credentials.

Use with Switch2 or Net2 Marine grade stainless steel Works in marine & harsh environments Blue backlight for high visibilty IPX7 rated

Everswitch ASH-Prox MultiClass is an access control reader with proximity only.

G-Prox III Readers have the unique ability to read standard G-Prox I (HID®) cards and G-Prox II cards concurrently. Customers that have standardised on HID® technology can now take advantage of the arming station functionality previously available only with G-Prox II readers. G-Prox III readers may be installed with other HID® long-range readers where needed.

PCSC SF-3000 is a wiegand access control reader that features fingerprint recognition, access control management, and an efficient time & attendance system.

Card Swipe, Networkable, LED, Beige/Black, Clock-and-Data Interface, 5 ~ 12 V DC, 50 mA, 50 x 140 x 33, 290, 0 ~ 70, 0 ~ 95

Compatible with a variety of Rosslare's Wiegand 26-Bit Format supporting access controllers: AC-215, AC-115, AC-015 and with many third party access control systems.

The Bio-X Series Outdoor Biometric Readers. A robust, weatherproof and vandal resistant security device designed for all climatic conditionsThe miPASS BIO-X & XK Series readers offers the ultimate security by combining leadingedge fingerprint scanning technology and encryption for secure user verification and authentication, limiting exposure through lost or stolen access cards.Card holder’s access control data and fingerprint template is encoded directly into the memory chip of the miPASS card, which is secured with encryption keys protecting the card holder’s information from beingcompromised.The BIO-X & KX Series reads the cardholder’s data from the memory chip of a miPASS card and only transmits to a door controller once a valid finger has been presented.In addition to the smart card reader + fingerprint verification device, the BIO-XK is fitted with a 4 x 3 keypad and 4 programable function keys.Authentication is performed locally within the BIO-X & XK Series readers and doesn’t require reference to a centralised database.The ‘Match on Card’ method improve performance by minimising verification time and eliminating privacy concerns. The 1:1 ‘match on card’ method eliminates False Acceptance Rates (F.A.R) providing a more accurate result that than to 1:N (1 to many) systems.Ideal for new site installations or security enhancements of any existing access control systems using Mifare, ‘Swipe’ or ‘Prox’ (125 KHz) card and reader technologies, the Bio Series offers a cost effective solution for high security requirements.Both the BIO-X & XK Series readers are available in three different models to cater for all high security requirements large or small, whether your projects are price or functionality driven.

Support for multiple card technologies including: MIFARE DESFire EV1®,MIFARE DESFire EV2®, MIFARE Plus® and MIFARE Classic®, as well as optional 125 kHz proximity and Bluetooth® wireless technology Field upgradeable software Secure reader authentication and encryption of data communications with HBUS  Upgrade software in situ to keep your system up to date with the latest technology developments. Protection from extreme environmental conditions Environmentally friendly – RoHS compliant and designed for minimal power consumption

The miPASS Bio Series range offers the ultimate security by combining leading edge fingerprint scanning technology and encryption for secure user verification and authentication, limiting exposure through lost or stolen access cards.Card holder's access control data and fingerprint template is encoded directly into the memory chip of the miPASS card, which is secured with encryption keys protecting the card holder's information from being compromised.  The Bio Series reads the cardholder's data from the memory chip of a miPASS card and only transmits to a door controller once a valid finger has been presented. Authentication is performed locally within the Bio Series reader and does not require reference to a centralised database, thus improving performance by minimising verifi cation time and eliminating privacy concerns.  The 1:1 matching method eliminates False Acceptance Rates (F.A.R) normally prone to 1:N (1 to many) systems. Ideal for new site installations or security enhancements of any existing access control systems using Mifare, `Swipe' or `Prox' (125 KHz) card and reader technologies, the Bio Series offers a cost-effective solution for high security requirements. 

Contact, Networkable, IP65, Flush mount, Keypad Integrated, LED, White, Wiegand Interface, Clock-and-Data Interface, 5 ~ 16 V DC, 110 mA, 21 x 76 x 120, 480, -30 ~ +65, 0 ~ 95, Weather Resistant

Magstripe card compact reader 1000 user is a single door access control system with all of the electronics within the housing of the reader. Compact 1000 system can be installed to many doors over a site, all using the same cards. Once installed, any magstripe card that is encoded on track 2 in an ABA format can be enrolled onto the reader. The reader is supplied with a satin chrome finish, metal housing.

At IFSEC 2010 Borer demonstrated access control solutions, employing combined Smartcard and Biometric Authentication; with all door equipment including electric release powered over a single CAT5 cable. The combination of biometrics, secure authentication and Power over Ethernet technology provides a very high level of security together with significant lifetime cost savings when compared to alternative systems.Borer's unique smart power delivery and management system using 'Power over Ethernet' (PoE) technology delivers both substantial energy savings and a significant reduction in the cost of installation and subsequent system maintenance. Users can save in the region of £50 per year per door in energy costs alone compared to many alternative systems. In addition the delivery of both power and data over CAT5e structured cabling means that you don't need to install a mains spur at every door, saving between £200- £600 per door on a retrofit. There are also savings to be made on the cost of installation and maintenance, as there is no requirement for a door controller, power supply/battery charger or batteries local to the door.Unlike many other solutions where Biometric details are held on a central database, Borer holds these templates on the card ensuring that cardholders retain possession of their personal data at all times. On enrolment cardholder data together with PIN, biometric template(s) and a digital image are written directly to a DESFire smartcard.Up to 16 separate encrypted files containing cardholder identity, PIN, biometric template(s), digital photograph, qualifications, etc. can be written to the card's memory.  The cardholder's details including biometric template are protected using 3DES or AES encryption ensuring that they cannot be compromised.The card reader supports three factor authentication using combinations of identification including card, card + PIN, card + biometric, card + PIN + biometric.When a card is presented for authentication at the reader; fingerprint template(s) are read from the card and passed to the biometric reader for comparison. Only when a cardholder's identity and the fingerprint read from their card match is access granted.

AMAG Javelin S884-KP is a contactless smart card reader with LCD display and keypad designed for integrated access control and intrusion management. Primarily for high security areas, the Javelin S884-KP can operate as a standard access control reader or as a fully functional, intelligent alarm keypad with flexible intrusion alarm management capabilities. A single action of presenting a card at a reader can disarm the area behind the door (if authorized to do so) and unlock the door. The Javelin S884-KP reads NXP MIFARE® and MIFARE® DESFire smart cards.

G-Prox III Readers have the unique ability to read standard G-Prox I (HID®) cards and G-Prox II cards concurrently. Customers that have standardised on HID® technology can now take advantage of the arming station functionality previously available only with G-Prox II readers. G-Prox III readers may be installed with other HID® long-range readers where needed.

The BM683 reader is stylish as well as functional with its low profile and slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit. It can be mounted directly on a metal door frame with no adverse effect to the reader’s function.

CEM emerald TS100 intelligent access terminal has a large internal encrypted database that enables it to operate in off-line mode. It also has PIR motion detection as well as supports a range of smart card technologies.

The universal proximity reader - clock and data reads multiple technologies: Hitag2, EM41000 and PAC.

The Desktop reader provides an easy to use method of enrolling cards onto your Access Management Software. The reader utilises a USB connection to make it simple to use on the PC simulating keyboard entry when a card is presented to the reader.

BQT Solutions BT815-2F flushmount reader offers flexible security options in a low profile design. The reader offers superior security and flexibility through its customisation and encryption options to suit all access control requirements delivering unrivalled security from the reader to the card. The unit features a universal back plate which simplifies mounting on most international standard gang boxes.

Smart Card, Networkable, IP67, Surface mount, RS485, 20 ~ 60 mm, LED / Beep, Charcoal & Ivory, Wiegand Interface, 5 ~ 12 V DC, 170 mA, 90 x 90 x 27, ~25 ~ +65, 0 ~ 90

AMAG Javelin S880-KP is a proximity card reader with LCD display and keypad designed for integrated access control and intrusion management. The Javelin S880-KP can operate as a standard access control reader or as a fully functional, intelligent alarm keypad with flexible intrusion alarm management capabilities. A single action of presenting a card at a reader can disarm the area behind the door (if authorized to do so) and unlock the door.

CEM RDR/612/688 is an exit card reader with PIN designed for use as part of an integrated on-line access control system. The Exit Reader is an extension to the master reader, providing a combined total of features at the point of entry. It communicates directly with the master reader.

User-friendly 4.3 inch capacitive LCD touch screen Intuitive graphical user interface Fully integrated built-in VoIP intercom functionality Scramble keypad option for personal identification number (PIN) 10/100 Mbps Ethernet host connection Easy to install

Housing material: Aluminium. 

13.56 MHz (MIFARE) contactless smart card reader.  Read the card which is issued by PRG2000 (Smart card read/write programmer).

BQT Solutions BT817-4 offers superior security and flexibility through its customisation and encryption options to suit all access control requirements, delivering unrivalled security from the reader to the card. It is designed for applications, where a high-level of security is required by combining smart card identification with a personal identification number (PIN) for secure user authentication and verification.

Proximity, IP66, Panel mount, 35 mm, multi-colour LEDs, Yellow / Black, < 100mA, 83 x 60 x 16, 100, -20 ~ +60, Indoor / Outdoor weather resistant

Proximity, IP66, Mullion mount, 90 mm, Black, White, Blue and Grey, < 100mA, 100 x 41 x 18, 74, -20 ~ +60, 0 ~ 85, Indoor / Outdoor weather resistant

The BT815 Series of readers is a low profile, extremely robust unit and has been engineered to withstand the harshest of environments. The BT815 Series is designed with ease of installation in mind and may be installed on flush surfaces and mounted on most international standard gang boxes with the addition of a backing plate.

Lenel's Mullion mount reader offers a read range of a mid-range readers at the cost of a 'mini'.  It is designed to be mounted directly on a metal door frame/mullion.

Smart Card, Standalone, IP67, Flush mount, Wiegand, 20 ~ 60 mm, LED, Charcoal & Ivory, Wiegand Interface, 12 V DC, 120 mA, 90 x 90 x 27, -25 ~ +65, 0 ~ 90

CEM RDR/610/107 DESFire card reader is designed for use as part of an integrated on-line access control system and is used to control access to restricted areas or in special applications where card activation of machinery is required. It also features large reader database for off-line card verification and alarms.

Following the successful introduction of the combined biometric and smartcard reader Borer are now adding a USB connected smart card reader/writer to their family of Network ready smart card readers. Aesthetically pleasing with a sleek black, desktop wedge housing just 45 mm wide, the Fusion USB proximity card reader connects directly to a PC via the standard USB Interface. It can be used for cardholder enrolment, to write cardholder details including the Cardholder Unique Identity (CHUID), PIN and optionally biometric templates (finger-print or iris). A digital photograph of the cardholder can also be written to the card. The card reader can also be configured as read only to prevent unauthorised data being written to a card. The FUSION USB Card Reader/Writer supports industry standard (ISO 14443A and B - Mifare and DESFire, ISO 7803-4 and ISO 15693) where a card can be used for a variety of applications including access control, attendance recording, travel card and cashless vending. All data written to the card is heavily encrypted using secure 3DES or AES encryption ensuring that the data held on the card can only be accessed by authorised users. Unlike many other solutions where biometric details are held on a central database, Borer holds these templates on the card ensuring that cardholders retain possession of their personal data at all times. Because the cardholders' personal and biometric information are held on a smartcard rather than on a central database or in the reader's memory, the system can support an unlimited number of cardholders and biometric templates. The card reader firmware is field upgradeable so that new firmware can be downloaded to the reader head enabling new applications or generations of smart cards to be supported.

The BM680 reader is stylish as well as functional with its low profile and slimline shape, allowing easy installation on door architraves or mullions where larger readers will not fit. It can be mounted directly on a metal door frame with no adverse effect to the reader’s function.