Access Control Readers  (1,387)

Designed for single door or gate stand-alone applications 1000 card code memory Programming via add/delete programming cards or with a hand-held remote device Add/delete individual cards or blocks of cards Available as a card reader only, or mounted on a lighted enclosure for outdoor use Uses DK Prox cards only

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Schlage® MTK15 is a keypad reader with smart and proximity technology all in one. It is also compatible with NFC mobile credentials on iOS and Android platforms, allowing facilities to migrate to more secure credential technologies over time as budget permits. 

Webcast combines the features of a web server and access control into one unit. Bulit-in web server allows monitoring and programming of access control parameters through a web browser. Webcast can connect to any network port or hub. Access via card only, PIN only and card and PIN.

The SM10 smart reader is compatible with Schlage NFC Mobile and 13.56 MHz credentials including MIFARE Classic® and MIFARE® DESFire® and is recommended for mid-level to high security applications where secure, encrypted technology is required. It features a mini-mullion design, ideal for installation in tight spaces.

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

The legacy PR10 proximity reader is compatible with 125 kHz low frequency credentials and can be used for lower security applications. It features a compact, unobtrusive design for easy installation in tight spaces.  

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Mobile ready Schlage® MTB readers deliver maximum capabilities and compatibility in one single unit for simplified access control. The MTB11 mullion reader is designed to support Bluetooth® (BLE) and NFC mobile technologies in addition to reading both proximity and smart, allowing a seamless transition to more secure credentials at customers' own pace.

The TS0861C is suitable for mounting on metal door or window frames. The face of the reader has 2 LEDs and a built in beeper, which provides access control status indication. Connections on the TS0861C interface to the Smart Door Controller, the TS0802 and TS0805 Arming Stations for access control. The magnetic swipe card reader is designed to interface with the Smart Door Controller board.

Field-proven hand geometry technology. Stand-alone, Wiegand or network capability. Each reader capable of up to 32,512 individual users. Integrated proximity and smart card reader options. Indoor and outdoor versions available. Optional Windows-based, networkable access control software. BioCote antimicrobial agent is applied to the platen of each unit. A blue hand outline printed on the platen makes the HandKey easier to use.

The ATS Cyber Series Biometric is a time and data collection terminal that sets a new standard with the proven E-field sensor technology. This method of fingerprint recognition distinguishes a ridge from a valley with sensors located on a one inch by one-inch pod. The Cyber Series is able to provide security that will save company money through the elimination of buddy punching and time theft. Other features include single/multi-clock environment, RS232/RS485 compatibility, on-board set-up and diagnostics utility, digital bar code wand port, external proximity reader support and durable industrial housing.

P- 700-H is same Medium Range Reader as above but with HIDTM compatibility.

Built-in proximity card reader (available with DK ProxPlus, DK Prox, AWID or HID reader) Available as a controller only (add your own 26-bit wiegand device) Built-in programming keypad Indoor or outdoor use Stores up to 1000 card codes Transaction buffer stores last 3600 events Timed anti-pass back (1-59 minutes) Four time zones Clock and transaction buffer maintain data for up to 3 days in the event of a power outage Print Menu. Real time print mode. Form "C" dry contact relay 16 VAC, 20 VA power transformer supplied.

The ATS Series 2102 is a complete biometric solution suitable for any serial or TCP/IP time and data collection environment. The 2102 terminal captures, preserves and automatically updates the enrollment templates to ensure the highest degree of employee verification. Other features include single or multi-clock environments, capacitor-backed memory expandable to 768KB, EIA standard RS232/RS485 compatible, integrated and/or external bar code reader, integrated magnetic slot readers, digital bar code wand port, TCP/IP Ethernet 10-base-T compatible, opto-electronic technology, on-board set-up and diagnostics utility, dual peg finger geometry camera and die cast aluminium housing with lockable base.

Panel mounted version-model DAC115.

Intermediate Cardlock with zinc die cast body. Reader has built-in control unit. Functions include manipulation lock-out, door monitoring, printable door events, & tamper output. Ability to configure system to control a second door in close proximity.

SK-2323 is a mullion-style keypad with proximity card reader. Some of its features include: No moving parts allows the keypad to withstand heavy use. 2 Egress inputs and 1 door sensor input. Optical tamper sensor for added security. Rugged aluminum construction. Weatherproof (IP65) for outdoor use. Backlit keys for easy nighttime use.

The Schlage® MT11 smart and proximity reader can be easily mounted on to a door frame. It reads multiple brands of both legacy 125 kHz and 13.56 MHz technologies including MIFARE Classic® and MIFARE® DESFire®. The multi-tech reader is also compatible with NFC mobile credentials on iOS and Android platforms.

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Gradually transition your facility with a keypad, magnetic stripe, proximity, and smart reader​. The MTMSK15 reads multiple brands of both 125 kHz and 13.56 MHz technologies including Schlage MIFARE® and is also compatible with NFC mobile credentials on iOS and Android platforms.

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

The TWN4 MultiTech 2 reader is an all-in-one proximity reader for the following frequencies: 125 kHz, 134.2 kHz, 13.56 MHz, NFC. It can be connected through UART (TTL, RS232), USB, as well as Ethernet, and is available as a PCB module and with Desktop housing. TWN4 MultiTech 2 is also compatible with over 60 of the most common RFID technologies currently being used around the world. Furthermore, to expand the realm of supported contactless identification methods, the all-in-one reader also supports NFC and optionally Bluetooth Low Energy. It is compatible with the two most used smartphone operating systems - Android and iOS. Thus, it can also be integrated into mobile identification applications. In addition, TWN4 MultiTech 2 is flexibly programmable – when communicating with RFID transponders it can make automated decisions based on predefined rules. This type of configuration can easily be re-applied to other card readers by using a contactless configuration card, which considerably reduces installation times in large projects.

P- 400-H is same Stainless Steel & Fiber-Tex construction but with HIDTM compatibility.

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

Because physical contact is not required, proximity card readers can read card data through common building materials like: concrete, brick, stone, drywall, plaster, glass, wood, plastic...in fact, through anything but metal. Proximity card readers are maintenance free.   There are no parts to wear out or adjust. Passive card technology provides an unlimited number of "card reads" with no battery to wear out. Passive cards, unless they are physically abused, will last virtually forever. Clamshell, ISO Graphic and KeyTag type cards are available. Read ranges are not absolute and will vary depending on several factors including where the reader is mounted, the mounting surface and product application. These card readers output their data in 26-bit wiegand format. Most card readers operate on 5-12 VDC.  AVI systems may operate at different voltages. These card readers are not designed for stand-alone operation (see 1520/1524 readers) and must be connected to an access controller (DKS 1830 Series systems).

The HandKey II's design provides the ultimate in system reliability. Each HandKey II is a complete door controller providing door lock operation, request for exit, and alarm monitoring. All information, including biometric data and decision-making capability resides locally. This ensures your doors are secure and will continue to operate properly even if all communications to the main access control computer are lost.

LEGIC Identsystems Ltd, the worldwide developer and manufacturer of secure, contactless smart card technologies for personal identification applications, has announced it has partnered with United States based RF IDeas, Inc.  The leading provider of reader solutions for personal identification and access control will develop and manufacture cost efficient USB, RS-232 and Ethernet readers for a variety of access control applications for existing LEGIC customers.RF IDeas develops and manufactures contactless reader solutions that significantly expand functionality of building access cards to hundreds of further applications.  The applications include employee identification, computer and LAN access solutions, time/attendance, enrolment and more, all using existing contactless smart cards."What makes our partnership so exciting is the flexibility that RF IDeas brings to existing LEGIC's customers," stated Dr Otto Eggimann, Vice President Sales & Business Development of LEGIC.  "LEGIC's backward compatibility provides legacy customers the same ability as brand new customers to use their corporate credential for PC login from a proven leader.  RF IDeas' innovative and easy to use offering further enhances the LEGIC's application range especially for customers seeking to combine physical and logical access on the same credential.  We are very happy to welcome RF IDeas as a strong new partner in our expanding North American Partner network."RF IDeas will be producing readers for LEGIC's contactless smart card technology.  The RF IDeas reader AIR ID Enroll is a USB port based external reader of contactless smart cards for computer login access control.  It eliminates the need for manual entry and provides error-free identification.  AIR ID is compatible with LEGIC's 13.56 MHz contactless smart card technology and allows users to apply their building access card or other LEGIC identification and security tags/devices throughout the workplace."Adding LEGIC support to our AIR ID product line was effortless and the partnership allows us to address the current increase in demand in addition to expanding our reach into new markets," commented Rick Landuyt, CEO and President for RF IDeas, Inc.  "Including LEGIC based solutions in our offerings was an important advancement of our AIR ID product line."

Infrared – 3 to 30 inches per second.

Access doors using low and high frequency cards, as well as a mobile device with the Verkada Pass app Two–way communication with an integrated LED to display door status for entry and events Protected against the harshest environments with an IP66 and IK08 rating Access and manage the AD31 from Verkada’s cloud–based Command platform

The J110 is a ruggedised sensor that incorporates Lumidigm’s patented technology.  In a fraction of a second, multiple wavelengths of light coupled with advanced filtering techniques capture images at and below the surface of the skin.  The resulting high-quality fingerprint images virtually eliminate common performance problems due to poor images.  This award-winning sensor also has the industry’s best anti-spoof technology.Designed for the most demanding civil and access control applications, the J110 delivers high-quality, 500 dpi fingerprint images in all environments.  Multispectral imaging provides clean, clear fingerprint images when fingers are wet, extremely dry, or incompletely touching the platen.  By looking below the skin surface, high-quality fingerprint images can be captured even when the individual has little or no surface fingerprint.  This translates to repeatable high-quality fingerprint images that can reduce or eliminate enrollment problems and false rejections making secure high-throughput indoor and outdoor applications a reality.While fake fingers and finger spoofs are a significant risk for fingerprint applications, the J110 eliminates this barrier to deployment.  Readily available spoofs that easily defeat conventional fingerprint sensors such as thin films and prostheses are rendered useless against Lumidigm’s new sensor. Built to withstand the elements and continue to perform all day, every day in the real world, the J110 has a cast aluminum case and NEMA 4 rating and is capable of operating at temperatures from -20o to +70o C with humidity ranging from 10 – 99% RH.

Facilities can support magnetic stripe, proximity, and smart technology in one reader making the next upgrade in technology simple and seamless. The MTMS15 reads multiple brands of both 125 kHz and 13.56 MHz technologies including Schlage MIFARE® and is also compatible with NFC mobile credentials on iOS and Android platforms.

Advanced proximity reader and controller (remote). Requires advanced PC software (AB132). Functions include door monitoring, printable door events, tamper output and PC software option. Also available with PIN. Works with proximity cards (Cards Prox).

Optimized housing design for easy, fast and secure installation Integrated LF and HF antennas One on-board SAM socket (Secure Access Module) Interfaces: RS-485, RS-232 and Wiegand or Clock/Data. OSDP protocol optionally, USB Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card Direct chip-commands support Integrated BLE module 2.4 GHz for data communication and authentication, BLE v4.2, upgradable Firmware update in the field possible Powerful SDK for writing apps which are executed directly on the reader On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data TWN4 Upgrade Card for P and PI options available on request 3D construction data (STEP) available on request

115g in weight mounted by 2 X M3.5 screws (included). Can use keypads, magnetic cards, proximity cards or smart cards. Up to 128 PR700 units can be linked via RS485 network, offering automatic database synchronisation. 3 Options available: PR700+ a fingerprint verification unit which recognises all of the common PIN devices swipe card readers, keypads, or proximity readers. PR700+PIN a fingerprint verification system equipped with an integral keypad. PR700+Prox a fingerprint verification system with an integral proximity reader.

Optimized housing design for easy, fast and secure installation Integrated LF and HF antennas One on-board SAM socket (Secure Access Module) Interfaces: RS-485, RS-232 and Wiegand or Clock/Data. OSDP protocol optionally, USB Supports quick (re)configuration over network and over wireless interface with TWN4 CONFIG Card Direct chip-commands support Integrated BLE module 2.4 GHz for data communication and authentication, BLE v4.2, upgradable Firmware update in the field possible Powerful SDK for writing apps which are executed directly on the reader On-board 18 kB flash storage, e.g. for storing user accessible non-volatile data TWN4 Upgrade Card for P and PI options available on request 3D construction data (STEP) available on request

TWN4 Palon Compact M is a versatile OEM PCB for integration into third-party products and devices. It supports enhanced interfaces, especially RS-485. The new compact PCB module inherits all advantages and integrated tool support of the ELATEC TWN4 family. Although it is a general-purpose device, it is optimized for time attendance and access control. TWN4 Palon is a multi-technology reader/writer family supporting almost all 125 kHz and 13.56 MHz contactless technologies, including NFC. On-board antennas for HF and LF allow excellent contactless performance. An integrated Bluetooth Low Energy (BLE) module supports a broad range of mobile ID and authentication solutions as well.

The TWN4 MultiTech HF Mini is built for small size, low power consumption, price and flexibility. Thanks to its compact dimensions, it can be integrated directly into the main circuit board. ELATEC’s multi-technology mini readers support high-frequency RFID and optionally NFC. They are designed for integration into machines, handheld computers or any other devices. Outstanding features are the 4 user-configurable ports (to be configured as input or output), beeper support and an integrated high-performance antenna. The simple ASCII or binary protocol enables quick software development cycles. All host communication takes place via SPI or asynchronous serial TTL interface. The module offers positions for placement for two LEDs that can be software controlled. For applications requiring additional security, there is an external Secure Access Module (SAM). This enables the application to perform secure transactions, e.g., payment terminals, etc.

Intermediate Cardlock with PIN and 1 code. With zinc die cast body. Reader has built-in control unit. Functions include manipulation lock-out, door monitoring, printable door events, & tamper output. Ability to configure system to control a second door in close proximity. Works with magnetic stripe cards (Cards MS).

Advanced Cardlock with PIN and 8 codes. With zinc die cast body. Requires advanced software (AB132). Reader has built-in control unit. Functions include manipulation lock-out, door monitoring, printable door events, & tamper output. Works with magnetic stripe cards (Cards MS). Model SR521/RC426 is advanced cardlock and remote controller for single or multiple door applications while model RK531/RC426 comes with PIN.