Access control systems & kits  (996)

An advanced access control hardware architecture capable of providing solutions for large enterprise applications Monitors alarm input points, relay output points and interface with access control readers OSDP (V2) Secure Channel Protocol on-board

Integrated management of access control and the attendance 2.4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results Supports registering fingerprints from the terminal to software remotely Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 event records Two attendance authentication modes: authentication by person, authentication by device Stand-alone operation: locally add person, card and fingerprint information Exports the swiping card data and the attendance report to the USB Up to 32 normal shifts and up to 32 man-hour shifts can be configured

Integrated management of access control and the attendance 2.4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results Supports registering fingerprints from the terminal to software remotely  Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 event records Two attendance authentication modes: authentication by person, authentication by device Stand-alone operation: locally add person, card and fingerprint information

2.8-inch LCD screen to display time, date, week, and attendance information Transmission mode of wired network and Wi-Fi 1:N mode accurate and fast fingerprint recognition (recognition duration < 1.5s) Supports Max. 3000 users, Max. 3000 fingerprints, and Max. 10,000 pieces of events records Supports two ways of attendance authentication mode: authentication by person, authentication by device Supports the stand-alone operation (supports adding persons, cards, and fingerprints locally) Supports downloading attendance reports by U-disk Supports 32 normal shifts, 32 man-hour shifts, and 32 attendance holiday schedules Supports forming reports automatically Convenient installation and easy operation

2.8-inch LCD screen to display time, date, week, and attendance information Supports registering fingerprints from the terminal to software remotely Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 events records Two attendance authentication modes: authentication by person, authentication by device Stand-alone operation (supports adding persons, cards, and fingerprints locally)

Integrated management of access control and the attendance 4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results Wired network and Wi-Fi are available Accurate and fast fingerprint recognition. The recognition time duration is less than 1.5s 3000 users, Max. 3000 fingerprints and Max. 100,000 event records are available Different authentication types can be configured according to different situations Stand-alone operation: Locally add person, card and fingerprint information; Export the swiping card data and the attendance report to the USB Up to 32 normal shifts and up to 32 man-hour shifts can be configured Up to 32 attendance holiday schedules and up to 128 access control holiday schedules can be configured Generate the attendance report automatically The doorbell can connect the third party buzzer Standard wiegand 26/34 protocol for output and input. Connecting Hikvision wiegand card reader is also available. Tampering alarm and duress alarm function It is available to connect the external RS-485 secure door control to avoid the door opening when the terminal is destroyed Intelligent Chinese and English input

Integrated management of access control and the attendance 2.4-inch LCD screen to display the time, the date and swiping/fingerprint authentication results Supports registering fingerprints from the terminal to software remotely Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 event records Two attendance authentication modes: authentication by person, authentication by device Stand-alone operation: locally add person, card and fingerprint information

 Wall mounting 5-inch LCD touch screen to display operation interface, advertisement, etc. 2 MP wide-angle lens  WDR Face recognition distance: 0.3 m to 1 m High performance processor with deep learning algorithm  Max. 3000 face pictures and Max. 5000 fingerprints

Avigilon™ Access Control Manager (ACM) Professional is a web-based, access control network appliance designed for small- to medium-sized installations, with up to 32 readers. Intuitive and easy to use, ACM Professional simplifies access control with a cost-effective, all-in-one appliance. With a small form factor and powerful performance, ACM Professional installs into compact spaces with limited power consumption requirements.

32-bit processor Stand-alone operation management settings Supports offline working, and online upgrade Max. 3000 card number settings, and Max. 10000 event records Supports Mifare card recognition, and Mifare card number reading (DS-K1T802M) 128×64 Dot Matrix STN screen for displaying time, date, and week Supports TCP/IP network communication Multi-authentication mode: card, card and password

Traditional access control turnstiles require complex wiring to integrate sliding doors and facial recognition terminals. To make deployment and maintenance faster, simpler, and more cost effective, Hikvision has created a new range of Smart Turnstiles (DS-K3B631TX, DS-K3B961TX) with fully integrated MinMoe facial recognition terminals, QR code readers and card-readers. To provide secure access controls to buildings or other facilities, organizations frequently use turnstiles with facial recognition technology. However, the traditional design for this type of device incorporates mechanical sliding ‘wings’ or another type of turnstile door, plus a mounted authentication unit that needs to be integrated manually.  This design, which is based on two key components that need to communicate with each other, can be problematic. Not only does this design require complex wiring, making installation time consuming and expensive. But there is also a risk that a communications issue between the authentication and turnstile components could prevent an authorized person from entering a building, or vice versa – creating inconvenience and security risks.  Reducing complexity and costs for deployment and maintenance  To help organizations reduce deployment complexity and costs, Hikvision has created a new series of Smart Turnstiles. These feature built-in facial recognition terminals QR code readers and card-readers, thereby reducing wiring complexity, integration workloads and – ultimately – access control costs.  As well as only requiring one cable to plug into the network with a standard interface, the all-in-one Smart Turnstiles are also far more elegant and compact, which helps avoid the bother of wire stripping and using screws to make contacts between wires and the devices.  The new Hikvision Smart Turnstiles also save time for maintenance teams with self-diagnostics. Teams can simply review a web page to see any faults in any of the turnstile components, and codes are also displayed on the devices’ LED screens if a fault occurs.  This feature means that teams do not have to visit devices on site to diagnose faults, reducing maintenance workloads and costs and minimizing downtime and disruptions for end users.  Delivering optimal turnstile performance  The new Hikvision Smart Turnstiles offer an extremely high level of performance and durability. The servo motor used for the devices is empowered by the industry-leading motor control algorithms and supports throughput of 30 to 60 people per minute. Not only that, but the motor is engineered to last for 12 million opens-and-closes (MCBF), ensuring that the turnstiles have a very long useful lifespan.  Aside from the motor, the Smart Turnstiles boast a range of other high-performance components and features. With 20 pairs of IR lights, the turnstiles are highly reliable and durable – with ‘anti-pinch’ and ‘anti-tailgating’ capabilities.  The built-in authentication module provides a faster, touch-free access control experience with facial recognition technology, and is able to process up to 50,000 users, read 250,000 cards, and record up to 1,000,000 access control logs. The chassis of the devices are made of stainless steel, with a lane width of 550mm to 1,100mm to support different kinds of customer needs.  Meeting diverse access control needs The new Hikvision Smart Turnstiles are ideal for different kinds of buildings and facilities. They can also be deployed in a wide range of settings, industry verticals and sectors, from hotels and offices, to apartment buildings and education institutions, helping improve access control efficiency and reduce management costs. To meet the needs of a wide range of customers, the Smart Turnstiles offer advanced access control features and functionality. This includes people counting for crowd control to prevent the risk of crowd crushes, ensuring compliance with security and fire safety rules, anti-passback to ensure that cards cannot be used by multiple people to access restricted areas, visitor management feature for facilities with authorizing access control pass to visitors, and linkages with elevators for multistorey office or apartment scenarios. The smart turnstile also features extensive functionality with the Hikvision unified management platform, and users can build additional linkages between the turnstile and other security devices and systems, as required.The visual appeal of the turnstiles is further enhanced with vertical colored LED ‘light strips’ that can be easily changed online using an app, ensuring they always fit perfectly into their surroundings with proper color and mode settings. As an additional benefit, customers who wish to use the LED screens to broadcast advertising can customize the ad broadcast according to their needs.

Wall mounting 7-inch LCD touch screen to display operation interface, etc. Screen ratio: 16:9; Screen resolution: 1280p × 600p 2 MP wide-angle dual-lens WDR QR code Face recognition distance: 0.3 m to 1 m; Suggested person height for recognition: 1.4 m to 1.9 m High performance processor with deep learning algorithm

 2.8-inch LCD screen to display time, date, week, and attendance information Supports registering fingerprints from the terminal to software remotely Max. 800 users, Max. 800 fingerprints and Max. 50,000 events records  Two attendance authentication modes: authentication by person, authentication by device  Stand-alone operation (supports adding persons, cards, and fingerprints locally)

Human face images, fingerprints, cards and passwords can be recorded to the face recognition access standalone. With face detection box; the largest face among faces that appear at the same time is recognised first; the maximum face size can be configured on the web. Face recognition distance is 0.3m–2m , human height range is 1.1m–2.4m. Face verification accuracy>99%; face comparison speed ≤0.5s per person; false recognition rate<0.1%. Profile faces can be recognised; face recognition angle can be adjusted, the range is 0°–90°. Supports 30,000 users, 30,000 cards, 30,000 passwords, and 50 administrators. Support liveness detection. Supports duress alarm, tamper alarm, intrusion alarm, door contact timeout alarm, and illegal card exceeding time alarm. Has six user levels: general users, patrol users, blacklist users, VIP users, guests, and disabled users. Attendance records can be uploaded to the management platform

32-bit processor Stand-alone operation management settings Max. 3000 card number settings Supports authentication method of card and card & password Opens door via card password if the authentication method is card Adds up to 3000 card passwords Supports exit button Supports Mifare card, Mifare card number reading (DS-K1T801M) Watchdog design Data can be permanently saved after power-off

When it comes to key management Traka Touch makes your life easier. It gives you an intelligent ‘out of the box’ key management solution which operates entirely independently of your IT systems. Everything is managed via the touch screen on the front panel, from the initial administrative set up of users and keys, right through to the day to day user access.

2.8-inch LCD screen to display time, date, week, and attendance information Supports registering fingerprints from the terminal to software remotely Max. 800 users, Max. 800 fingerprints and Max. 50,000 events records Two attendance authentication modes: authentication by person, authentication by device Stand-alone operation (supports adding persons, cards, and fingerprints locally)

DS-K1T200 is a series optical IP-based fingerprint access control terminal with multiple advanced technologies including fingerprint recognition, face detection, Wi-Fi, smart card recognition, LCD display screen, and picture capturing technology. It is designed with a 2.8-inch LCD display screen, and HD camera (2 MP optional). It is equipped with optical fingerprint recognition module.

Provides I/O support for up to 2 doors Supports a maximum of 2 OSDP readers per door or 1 Wiegand reader per door

Supports Card, Password, and Fingerprint Credentials Supports MIFARE 13.56 MHz Cards Batch Functionality to Add Users Built-in Camera to Capture Real-time Photos Time-out/Time-in Management Touchscreen Keypad and LCD Display T9 Input Method Users Allowed to Query Attendance Records Download Attendance Report to USB Drive Upgrade Firmware via USB Drive

2.8-inch LCD screen to display time, date, week, and attendance information Supports registering fingerprints from the terminal to software remotely Max. 3000 users, Max. 3000 fingerprints and Max. 100,000 events records  Two attendance authentication modes: authentication by person, authentication by device  Stand-alone operation (supports adding persons, cards, and fingerprints locally)  Exports the swiping card data and the attendance report to the USB

2.4-inch LCD screen to display time, date, week, and attendance information TCP/IP communication 1:N mode accurate and fast fingerprint recognition (recognition duration < 1 s) Max. 1000 users, Max. 1000 fingerprints, and Max. 100,000 events records Stand-alone operation (supports adding persons, cards, and fingerprints locally) Downloads attendance reports by USB flash drive Up to 32 normal shifts, 32 man-hour shifts, and 32 attendance holiday schedules can be configured Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Generates reports automatically Supports multiple languages: English, Vietnamese, Brazilian Portuguese, Spanish, French, Italian, Arabic, Thai, Turkish, Indonesian, and Ukrainian Supports ISAPI protocol and ISUP 5.0 protocol

All-in-one solution for access control, complete with an ACM™ Appliance, LifeSafety Power Enclosure, Mercury Controller and Sub-Panels, RP40 Readers, and 100 pre-programmed HID® Cards. No card programming information required Pre-configured settings available

DS-K1T501SF is a kind of video access control terminal, which is equipped with HD camera(2 MP/1080p) and fingerprint recognition module (supporting 1:1 mode and 1:N mode). It supports multiple advanced technologies including fingerprint recognition, face detection, smart card recognition, two-way audio, remote live view, picture capture, video recording through NVR, and so on. It also supports multiple authentications including card, fingerprint, card and fingerprint, etc

 Installed on the swing barrier Water-proof 10.1-inch LCD touch screen to display operation interface, etc. Screen ratio: 16:9; Screen resolution: 1280p × 800p 2 MP wide-angle dual lens  WDR Manually adjust supplement light brightness Face recognition distance: 0.3 m to 1 m; Suggested person height for recognition: 1.4 m to 1.9 m Live face detection

2.4-inch LCD Display Fingerprint Access Control Terminal, Built-in Mifare card reading module Communication: TCP/IP，ISUP5.0 ； 1000 users, 1000 fingerprints，1000 card and Max. 100,000 event records Support Access Control and Time Attendance Function, Optical Fingerprint Module Remotely opens door via Hik-Connect mobile client；Tamper alarm.

2.4-inch LCD Display Fingerprint Access Control Terminal, Built-in EM card reading module Communication: TCP/IP，ISUP5.0 ； 1000 users, 1000 fingerprints，1000 card and Max. 100,000 event records Support Access Control and Time Attendance Function, Optical Fingerprint Module Remotely opens door via Hik-Connect mobile client；Tamper alarm.

DS-K1T105 is a series of standalone access control terminal with picture capturing function. DS-K1T105 is designed with a 2.8-inch LCD display screen, and HD camera (2 MP optional). It supports two network communication methods (TCP/IP, and Wi-Fi), and supports offline operation.

DS-K1T200 is a series optical IP-based fingerprint access control terminal with multiple advanced technologies including fingerprint recognition, face detection, Wi-Fi, smart card recognition, LCD display screen, and picture capturing technology. It is designed with a 2.8-inch LCD display screen, and HD camera (2 MP optional). It is equipped with optical fingerprint recognition module.

Supports Local activation IP addresses conflicted alarm M1 card encryption Supports communicating with 4 software clients simultaneously; Supports uploading real-time events  Gets offline events: Avoids events losing Doorbell ringtone settings function

2.4-inch LCD Display Fingerprint Access Control Terminal Communication: TCP/IP，ISUP5.0 ； 1000 users, 1000 fingerprints and Max. 100,000 event records Support Access Control and Time Attendance Function, Optical Fingerprint Module Remotely opens door via Hik-Connect mobile client；Tamper alarm.

All-in-one solution for access control, complete with an ACM™ Appliance, LifeSafety Power Enclosure, Mercury Controller and Sub-Panels, RP40 Readers, and 100 pre-programmed HID® Cards. No card programming information required Pre-configured settings available

Manage access control and intercom functions in one device IP65 & IK09 protections, as well as increased stability with zinc alloy materials Supports multiple authentication methods (card, fingerprint, PIN, etc.) Remote control via the Hik-Connect mobile app Connects to external access controller via Wiegand protocol Video intercom via SIP protocol. Supported SIP server: Brekeke, miniSipServer,FreePBX, Asterisk, 3CX, ELASTIX, and PBX ware RS-485 communication for connecting external card reader and calling elevator Supports AP mode Press calling button to call one of the following objects: management center, indoor station, specified indoor station, or Hik-Connect App

This is an 8 Input and 8 Output device that allows an ACT controller to be used in applications where signalling to other equipment is required.  Examples of this are elevator control, alarm systems, CCTV switching applications, I/O Mapping etc.Main Features 8 form C relays 8 supervised inputs Tamper protection 2 status LEDs Polycarbonate housing Input and output names Timer for each output Output switched off or on by log event, input, timezone ACTWinPro support Inputs and outputs Logged Normally open/closed Inputs monitored by timezone Supervised Inputs option

DS-K1T105 is a series of standalone access control terminal with picture capturing function. DS-K1T105 is designed with a 2.8-inch LCD display screen, and HD camera (2 MP optional). It supports two network communication methods (TCP/IP, and Wi-Fi), and supports offline operation.

2.4-inch LCD screen to display time, date, week, and attendance information TCP/IP communication 1:N mode accurate and fast fingerprint recognition (recognition duration < 1 s) Max. 1000 users, Max. 1000 fingerprints, and Max. 100,000 events records Stand-alone operation (supports adding persons, cards, and fingerprints locally) Downloads attendance reports by USB flash drive Up to 32 normal shifts, 32 man-hour shifts, and 32 attendance holiday schedules can be configured Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Generates reports automatically Supports multiple languages: English, Vietnamese, Brazilian Portuguese, Spanish, French, Italian, Arabic, Thai, Turkish, Indonesian, and Ukrainian Supports ISAPI protocol and ISUP 5.0 protocol

2.4-inch LCD screen to display time, date, week, and attendance information TCP/IP communication 1:N mode accurate and fast fingerprint recognition (recognition duration < 1 s) Max. 1000 users, Max. 1000 fingerprints, and Max. 100,000 events records Stand-alone operation (supports adding persons, cards, and fingerprints locally) Downloads attendance reports by USB flash drive Up to 32 normal shifts, 32 man-hour shifts, and 32 attendance holiday schedules can be configured Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Generates reports automatically Supports multiple languages: English, Vietnamese, Brazilian Portuguese, Spanish, French, Italian, Arabic, Thai, Turkish, Indonesian, and Ukrainian Supports ISAPI protocol and ISUP 5.0 protocol

2.4-inch LCD screen to display time, date, week, and attendance information TCP/IP communication 1:N mode accurate and fast fingerprint recognition (recognition duration < 1 s) Max. 1000 users, Max. 1000 fingerprints, and Max. 100,000 events records Stand-alone operation (supports adding persons, cards, and fingerprints locally) Downloads attendance reports by USB flash drive Up to 32 normal shifts, 32 man-hour shifts, and 32 attendance holiday schedules can be configured Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Generates reports automatically Supports multiple languages: English, Vietnamese, Brazilian Portuguese, Spanish, French, Italian, Arabic, Thai, Turkish, Indonesian, and Ukrainian Supports ISAPI protocol and ISUP 5.0 protocol

DS-K1T500S is a kind of video access control terminal, which is equipped with HD camera(2 MP/1080p). It supports multiple advanced technologies including face detection, smart card recognition, two-way audio, remote live view, picture capture, video recording through NVR, and so on.

All-in-one solution for access control, complete with an ACM™ Appliance, LifeSafety Power Enclosure, Mercury Controller and Sub-Panels, RP40 Readers, and 100 pre-programmed HID® Cards. No card programming information required Pre-configured settings available