Access control systems & kits  (996)

CyberLock HDP237W is a white end cap for the CK-RCG and CK-RXD CyberKey smart keys.

CyberLock TIP-008 is a replaceable case for the CK-RXD CyberKey smart key.

Internal controller. Uses proximity badges or PIN. Auxiliary proximity reader available (LPP or LP). Double sided sticker for LPP reader (DFP).

Kit with PROMI-500 or DG-Prox reader/controller, GAER release kit or mini magnet, power supply unit and 10 keyfobs.

14 way relay output board. Normally open, closes on alarm. LED status indicator. Address setting from DIP switch. Hooks onto RS485 bus.

This card can be used to connect the ACS-1 directly to a modem. It is supported by software version V.05.XX and upgrades.

DIGI*TRAC enrolment station.  Card enrolment & programming station to directly enrol 125 kHz proximity cards into a single standalone DIGI*TRAC controller.  Includes ScramblePad, CR20L ProxPoint card reader, ES2 enrolment stand, and cable.  Use with PR1 printer.

8 Input/2 Transistor Output in Metal Cabinet

Standard proximity version. Two visual indicators and an integral speaker allow for various connection combinations. A wide range of identity cards and key fobs are available. Standard ISO style plastic cards, with or without magnetic stripe, can be surface printed using standard PVC card printers. Combinations of models can be specified by various codes e.g. for HID, Third Millennium, LEGIC, Mifare technology with varying outputs and read technolgy.

The ATM Mini VAC provides security for automated teller machines users by ensuring that only authorized patrons have access to the vestibule. These reliable units unlock entrances to holders of bank cards and accommodate door operating hardware that is installed to assist physically challenged customers. If an optional buzzer is installed, the buzzer will sound to let patrons already inside the vestibule know that another user has entered. ATM Mini VAC is configured to read all valid Track 2 Magnetic Stripe cards, no extra programming required.

Provides an additional 2 Doors / 2 Readers for Host Module UniBus connectivity to Host Module Reader options to control Doors, Lifts, Areas and User Logon Supports Wiegand card readers up to 88bits Reader outputs with individual self-resetting over current protection UniBus loop-through connectors LED status & Fault Indicators Dedicated lock power input Heavy duty lock relays Reader Valid & Invalid Outputs Door reed & tongue sense inputs per door Door request to enter & exit inputs per door DOTL relay outputs per door Integriti “B” size footprint 200 x 94mm Remote firmware upgrade over-the-wire

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(203-25.4), PC-73(457-610), PC-74(457-610), PC-76(356-483), PC-77(457-610). Metal compensated wall mounted. Uses RS-232 control. Compatible with PCSC controllers. Wiegand output.

The AP-530 provides complete time zone control of access with its battery-backed real time clock, and provides a printer output for event logging and configuration output, via its RS-232 serial interface. No programming cards, as used on other low cost stand-alone readers, are required. All AP-530 programming is performed via its integral 12 position keypad.

16 Input/2 Transistor Output (PCB only)

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(6.4-7.6), PC-73(11.4-14.0), PC-74(11.4-14.0), PC-76(7.6-11.4), PC-77(11.4-14.0). Metal compensated and mounted in a Single Gang Box. Compatible with PCSC controllers. Wiegand output.

Automatic Program Installation and setup. 50,000 History transactions. Up to 64 readers. Automatic Door opening by time and day. Automatic card activation and deactivation. Photo image Importing.

Access 4000 combines security monitoring, access control of doors and lifts and building management technologies within one system. The Concept system is expandable to over 2000 detectors, inputs and outputs. It is compatible with all common access formats like PIN, magnetic stripe, proximity, wiegand, bar code, biometric, etc. The system can be divided into 96 independent or interdependent partitions or areas, which can communicate to each other by different communication formats. Flexible alarm processing options allow full customisation of the sequence of events that occur when an alarm or input is activated.

DIGI*TRAC enrolment station - mag strip.  Card enrolment & programming station to directly enrol mag stripe cards into a single standalone DIGI*TRAC controller.  Includes ScramblePad, mag stripe card reader, ES2 enrolment stand, and cable.  Use with PR1 Printer.

8 Transistor Output Add-on Modules (PCB only)

BLP processor is compatible with most card technologies. BLP controls and monitors two doors (readers) with the option of up to 30 additional inputs and 14 additional outputs for alarm monitoring and control functions. Also provides global and local anti-passback and 1,000-event buffer. Networkable. Works with Barlock keypads and readers, RAAM and AXxess 202/Lite/Express & NS.

8 Dry Contact Relay Add-on Module (PCB only)

The ReaderNet Analyser is used to analyse reader networks based on L-RX200, L-RX201 or W-RX201 Readers and also provides functionality to configure reader networks to suit requirements of the user. The ReaderNet Analyser also includes a ReaderNet Stress Tester that can be used to determine the smallest poll interval for a particular reader network. All other commands available for a particular reader model type can be selected from a drop-down list. Setting or changing the sequence of reader IDs in a reader network. Stress-test reader network facility built into software. Individual Tag data analyser built into software.

Available with standard Wiegand and clock/data output. Operates as slave to the AP-500 master or AP-550 reader/controller. The 503 module comes with integral keypad.

8 Input Add-on Modules (PCB only)

Metal compensated wall mounted. Uses RS-232 control. Compatible with PCSC controllers. Wiegand output.

Card enrolment & programming station (without card reader) to directly enrol cards into a single standalone DIGI*TRAC controller.  Use with compatible reader heads.  Includes ScramblePad, ES1 enrolment stand, and cable.  Use with PR1 printer.

ScramblePad keypad/reader provides a very high security approach to access, because the ID code or PIN number cannot be accidentally shared with, or stolen by, onlookers. Dual Technology Readers. ScramblePad with built-in Proximity Reader. Uses Motorola, Indala & HID Cards & Hirsch controller.

Provides the system with added security by a third level of databse redundancy. The database can reside in the reader as well as in the host AAM/AAN controllers. Can perform access control autonomously should the communications with the controller be lost.

M3 Pro is a metal casing, IP65 water-proof design compact access control device, suitable for outdoor applications Supports 13.56MHZ mifare card and 125KHZ EM card dual frequency module The touch backlit keypad, support TCP/IP and RS485 communication convenient for customers to use Built-in relay for direct lock and standard wiegand output The new Linux based 1Ghz processor ensures the 1:10,000 comparison time less than 0.5 second The WiFi function ensures power on to work, and realize the flexible installation of the device The Webserver ensures the easily quick connection and self management of the device

The TIRIS RFID system for automatic consumer recognition consists of keyring tags, vehicle tags and RF reader electronics. The reader system has a digital control board, a transmitter module, 2 antenna tuning boards, 2 receiver antennas, 1 receiver module, 2 benzel boards with a microreader and a keyring antenna. The tags comprise two main components; an antenna to communicate via radio signals with the reader, and an integrated circuit to store a unique ID code.

Comprises 1 x AC-3210 controller, 1 x AC-3211 reader head, 10 x AC-7101 proximity tags. Install two reader heads for in/out control on one door. AC-3211 reader heads are pre-wired with a 2 metre cable.

Net2Air is a new hands free solution for new and existing users of Net2, Paxton Access' leading network access control system.Conventional hands free access control relies upon large readers to achieve the long read range. Net2Air completely changes this, achieving hands free access control with readers as small as Paxton's 38mm PROXIMITY P38 reader. Cost effective solution to DDA requirements. Any P series readers can be swiftly converted to 'hands free' with typical read ranges from 1 to 3 metres. Extensive read range from small, inconspicuous readers. Convenience without detracting from the look of the building 3D Antenna, not 2D. Keyfobs will be read at any angle. The choice of readers means that the reader and read range most appropriate for the project can be selected. Existing users of Net2 can incorporate Net2Air hands free alongside their existing readers without having to change any system components. All that is required is the addition of the Net2Air hands free interface. Users that require hands free access are issued the Net2Air hands free keyfobs. Everybody else continues using their original tokens. Keeps costs down.

Built-n controller controls 2 doors. Uses cards. LED access indication. For internal and external use.

Slimline prox. The AC-1100 employs very large scale integration (VLSI) surface-mount components, and utilises the I/O capability of the AC-4300 card reader controller to deliver a compact, flexible proximity solution. RS-485 serial port with a baud rate of 9600. 2 units can be multi-dropped using a single twisted pair cable.

Insight Lite enables to programme one or more IR control modules on the same or different sites, on-site or remotely, online or offline. Full Windows functionality such as copy-and-paste, hyperlinks and multi-step undo make Insight Lite a familiar tool from the first time use. Programming changes to modules take effect without the need to secure or initialise the IR LAN. Other features include powerful search tool searches, high file compression for fast communications, powerful cross-reference tool, LAN status of modules/zones/auxiliaries and random user PIN generator.

Supports two doors and four readers End-to-end AES128-bit encryption Secure HTTPS (SSL/TLS) web server Includes free software and free app Capacity for up to 500 doors and 10,000 cards Fail secure/fail safe adjustable lock

Camera control: RS-422 (2 channel available). Access door interface: Wiegand and RS-422 card reader available.

For internal/external use. Reader and controller. With LED and audio.

Combining reliability, latest technology, simplicity and value for money for small to medium applications, features include common housings for all readers and keypads to enable straightforward changes or upgrades and simplicity to keep both installation and end user training time to a minimum.Stand Alone range Including keypads, proximity readers or a combined unit Providing value for money for single door access control with up to 250 users Simple to install and program Variety of flush and surface mount housingsMultiplexed system Up to 30 devices networked to central control unit for up to 1000 users Cost effective and expandable solution for mid range companies Remote configuration option for greater installation efficiency

Reader set with keyfobs. Up to 4 readers can be connected to panel. Can be used with Accenta keypads.