Access control systems & kits  (1,016)

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyze reports, and monitor the system remotely from any web browser.

Important digital video clips can be copied from OnGuard GO!, exported and transmitted via e-mail to any industry-standard media or through any industry-standard network infrastructure.  The information can then be viewed using any Windows standard media player.  Every OnGuard GO! system comes equipped with a read/write CD-ROM drive to facilitate video clip export.

The RDCU IP reader/door control unit is one of several network devices that make up the S3000 Access Control system, taking full advantage of the existing vantage of the IT network infrastructure and low cost structured cabling system (CAT5e or CAT6).The RDCU is a single door controller with two Weigand reader connections that allow for both read-in and read-out applications. All door functions are connected and powered utilizing the RDCU's PoE capability, including most door strikes and locking mechanisms. An optional relay is available for heavy duty locks and gate operators.The RDCU supports plug-and-use technology, Power-over-Ethernet, strong encrypted TCP/IP communication (SSL), automatic IP assignment (via LPU), and optional Li-polymer battery pack.The S3000 access control system is fully interoperable with the Xtralis 3000.Series family of products, including the V3100 for video and audio recording and transmission, the V3500 for mass storage and archiving, and the V3001 for video.

The Xtralis S3000 LPU provides database and command functions, runs on Linux OS and includes multiple levels of redundancy for increased reliability and performance, including dual Ethernet connections, dual power connections and optional Li-polymer batteries. Protocol: TCP/IP, NTP, ARP, ICMP, SSH, IPv4, IPv6.

The Gallagher PIV Solution, offers a physical access control solution that fully complies with the Personal Identity Verification (PIV) requirements of the FIPS 201-2 standard, offering world class security to federal agencies and their contractors. It is currently the only enterprise - level physical access control system on the GSA APL which supports PIV card and related Public Key Infrastructure (PKI) certificate checking. The Gallagher PIV solution offers real-time and strong authentication of PIV, PIV-I, Common Access Card (CAC) and Transport Workers Identification Card (TWIC) credentials. Gallagher has enabled a simplified, cost effective implementation of a FIPS 201-2 compliant system using a single management platform and has become market leading for the following key reasons: Easy to implement, configure, and maintain Single management platform Simplified architecture Upgradable field hardware – protecting your investment Real-time and secure certificate based authentication of PIV, PIV-I, CAC, and TWIC credentials Secure authentication and encryption between all system components Does not require additional components to achieve compliance.

Morse Watchmans KeyWatcher 6 Horizontal Key Module is an electronic cabinet system that allows for more mounting options, such as under cabinets or on counter tops. It accepts all standard KeyWatcher modules, and comes standard with the bottom mounted control box, but can be used with a remotely mounted keypad and display box. It is expandable, if future growth demands the need for more keys, modules or add-on cabinets can be added to increase the capacity of the system. Additionally, it has 6, 8 & 16 location SmartKey modules, Card/Credit Card module, Single and Dual Locker modules.

1GHZ fast CPU Less than 0.5 second comparion time Touch active keypad IR touch active fingerprint sensor Colourful TFT-LCD screen Optional WIFI Function Optional Battery up to 10hrs working Black and White colour options

Morse Watchmans KeyWatcher Enrollment Station is available in wall mount or desktop versions. It allows for fingerprint and card enrollments to be done from a more convenient location. Additionally, it allows enrollment data to be transferred to other systems automatically via the KeyPro III software.

Important digital video clips can be copied from OnGuard GO!, exported and transmitted via e-mail to any industry-standard media or through any industry-standard network infrastructure.  The information can then be viewed using any Windows standard media player.  Every OnGuard GO! system comes equipped with a read/write CD-ROM drive to facilitate video clip export.

Stainless steel, impact resistant, LED indication for key acceptance. For use with Easikey 1000 Controllers.

PIN and prox. (also available in brass -20358), for Easikey 1000 & PAC2200 series controllers.

Adding and deleting through two programming cards, Dual LED's and a built in sounder give feedback. UNIVERSAL. Requires a 12v DC 1 Amp PSU

Adding and deleting through two programming cards, Dual LED's and a built in sounder give feedback.. Requires a 12v DC 1 Amp PSU. The Vandal Resistant Solo requires a special screwdriver to fit the vandal screws (supplied).

The PAC Oneprox PC interface kit is designed to ease the task of enrolling credentials. An enrolment desktop reader connects via an interface kit to a serial port on the host administration PC, and the ID device numbers are read directly into a database. There are four kits available, an embedded PAC Oneprox proximity enrolment reader option (PC serial input), a PAC Wiegand interface option which enables the connection of a Wiegand enrolment reader, an embedded PAC Oneprox proximity enrolment reader with built-in line driver and PC USB interface, and the PC Interface for installations where an enrolment reader is not required, for example card numbers may be manually entered into the software.

 The new Linux based 1Ghz processor ensures the 1:3000 comparison time less than 0.5 second The Colorful LCD screen ensures the best interaction and user experiences and can also provide clear notifications to the users. The WiFi function ensures power on to work, and realize the flexible installation of the device.  The big physical keypad ensures the best user experiences and easily to use for all people around the world The touch active sensor ensures the quick response for each detection and saving the total power consumption of the device.  The Webserver ensures the easily quick connection and self management of the device.

mullion mount, for use with Easikey and Easikey 1000 Controllers.

The latest generation FacePass 7 Pro is a face recognition access control and time attendance terminal with IR-based live face detection for highly secure authentication that supports RFID cards, Mask Detection as well as Temperature Screening. FacePass 7 Pro is easy to install, use with features like an intuitive interface on 3.5" TFT Touchscreen, quick management by Face Image Registration, the built-in Web Server, compatible with Anviz CrossChex Standard desktop software, and Anviz cloud-based software CrossChex Cloud.

Includes eXcel 4 controller, four eXprox readers and 50 cards.  eXguard eXpress software included.

Rapid Deployment Kit (RDK).  Wireless intrusion detection and alarm system based on the Hirsch DIGI*TRAC Model 2 controller for the premises unit and Velocity software for the monitoring site.  Portability in heavy duty cases.  Area protection in minutes - includes 2 wireless PIR motion detectors, 2 wireless door contacts, screw or tape mounting.  ScramblePad® arming station.  Two wireless pagers.  Wireless remote monitoring station with alarm & event annunciation, historical reports.  Full detail audit trail.  Encrypted network communications - HEC 64 bit and frequency, hopping spread spectrum.  Supports hardwired I/O - local CCTV activation, access control options, temporary to permanent installations.  Interior and perimeter zones can be controlled separately.  Battery backup. 

Important digital video clips can be copied from OnGuard GO!, exported and transmitted via e-mail to any industry-standard media or through any industry-standard network infrastructure.  The information can then be viewed using any Windows standard media player.  Every OnGuard GO! system comes equipped with a read/write CD-ROM drive to facilitate video clip export.

Bosch API-AEC21-8I8O is an 8 input-output board.

Various read ranges can be achieved from this reader by the use of different cards as follows(cm): PC-72(7.6-8.9), PC-73(12.7-15.2), PC-74(15.2-20.3), PC-76(12.7-15.2), PC-77(12.7-15.2). Uses RS-232 control and is metal compensated. Compatible with PCSC controllers. Wiegand output.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyze reports, and monitor the system remotely from any web browser.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyse reports, and monitor the system remotely from any web browser.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyze reports, and monitor the system remotely from any web browser.

Contactless reader, with clock/data interface, 12 cm reading distance. Model 026390.10 available with RS-485 interface.

The 2 door access module provides an interface for card reader access control and security. The alarm system in specific areas may be turned on and off upon presentation of a valid card at a Card Reader. In addition, dual card, card plus PIN, and anti-passback requirements may be assigned on a per door basis when programming the system. Door Open Too Long and Tongue Sense inputs are also provided, as well as outputs for indication of valid or invalid requests for access.

These full-featured, self-contained hardware/software access systems are perfect for commercial, industrial, banking, medical, retail, hospitality, and other businesses where users need to secure their facilities, manage access of personnel, create and analyse reports, and monitor the system remotely from any web browser.

Adding and deleting through two programming cards, Dual LED's and a built in sounder give feedback. Requires a 12v DC 1 Amp PSU. The Vandal Resistant Solo requires a special screwdriver to fit the vandal screws (supplied).

Single door kit with DC250 card reader controller, proximity card reader, 12v dc power supply, magnet and 10 cards. For internal/external use.

Single door access control kit with card reader controller DC250, magnetic stripe card reader, 12v dc power supply, lock release and 10 cards. For internal/external use.

The KeyPAC Shadow Solo offers a significant improvement to its predecessor, the KeyPAC Solo.  The new Shadow version is a fully voidable system – i.e. the ability to deactivate specific lost or stolen ID devices without the need to deactivate and re-issue all the cards within the system.  Standard features include: Up to 2,000 users Supplied with 10 ID devices, 10 Shadow cards and 2 master cards Available in Standard, Universal and Vandal Resistant versions Five year guarantee

mullion mount, for use with Easikey and Easikey 1000 Controllers.

single door kit with DC250 card reader controller, magnetic stripe card reader, 12v dc power supply, lock release and 10 cards. For internal/external use.

Important digital video clips can be copied from OnGuard GO!, exported and transmitted via e-mail to any industry-standard media or through any industry-standard network infrastructure.  The information can then be viewed using any Windows standard media player.  Every OnGuard GO! system comes equipped with a read/write CD-ROM drive to facilitate video clip export.

W1 Pro is the new generation fingerprint time attendance terminal features based on Linux platform. W1 houses 2.8-inch color LCD with rich colours and visibility that displays intuitive GUI that is easy to understand and self-explanatory. Full capacitive touch keypads along with touch optical fingerprint sensor will offer convenient operation experience and improve the practicality of the wet and dry fingerprint.

Introducing the new eMerge™ E3 Series from Linear: a powerful Access Control platform delivering best-in-class value for businesses of any size: Monitor and manage the system via the LAN, WAN, WWW, from a PC, laptop, or mobile device (tablet, smart phone) Delivers a lower Total Cost of Ownership (TCO) by eliminating future system upgrade and reconfigure costs, and reducing daily operating costs Rapid and hassle-free system expansion via License Key – single platform controls a growing number of connected systems and devices Replaces PC-based systems with open architecture solid-state hardware that is easier to install, integrate and use One System for 1 - 360 Doors The eMerge E3 Series is a single platform that suits virtually every application and operation size. Fully scalable at the touch of a button, users can select models based on their current access control needs, and upgrade as their business grow with the purchase of a License Key -- no data conversions, no hardware changes, just the right system, at the right price. eMerge Essential: 1 door/2 readers; out-of-the box expansion to 4 doors/8 readers eMerge Elite 36: 36 doors/72 readers eMerge Elite 64: 64 doors/128 readers eMerge Enterprise: 4-360 doors/720 readers

1GHz Linux Based Processor Wi-Fi Flexible Communication Liveness Face Detection Wide Angle Camera IPS Full Screen Web Server Cloud Application

Stainless steel, for Easikey 1000 & PAC2200 series controllers. Also available in brass -model 20688.

Adding and deleting through two programming cards, Dual LED's and a built in sounder give feedback. STANDARD. Requires a 12v DC 1 Amp PSU