Access control systems & kits  (996)

16kbyte. Red colour.

The main features include automatic British summer time / Winter time correction, six fully programmable on/off times, battery backup, LCD back lit display.

starter pack of 8 function cards and 16 user cards and shadow cards.

ISONAS IPBridge-2 is a 2 door access control system that replaces existing panels and eliminates the need to rip and replace existing hardware to upgrade system. It seamlessly allows migration to a Pure IP Access Control Solution by bridging Wiegand systems with Pure IP Systems. It supports standard door hardware, including Wiegand readers. The dual network port allows interconnection of multiple IP-Bridges. Each door is capable of storing 20,000 cardholders, 5000 access events and 32 time zones which can be configured and accessed by an external host system. The local mode feature allows readers to function without the host. This results in faster user response times, less network traffic and reduced host system loading.

CEM SYS/500/000 is an AC2000 Lite workstation licence.

Remote apartment unit to add 1 internal door (up to 100 in the same BUS). 2nd reader option. 2 locks time setting (2 and 5 seconds). 9 module A type DIN box and backup battery facility.

Morse Watchmans KeyWatcher Touch 2 Key Module is an electronic cabinet system that accepts all standard KeyWatcher modules. It comes standard with the bottom mounted control box, but can be used with a remotely mounted keypad and display box. It has 6, 8 & 16 location smartKey modules, card/credit card module, single and dual locker modules.

Morse Watchmans KeyWatcher Touch 3 Key Module is an electronic cabinet system that accepts all standard KeyWatcher modules. It contains up to 48 SmartKey locations per cabinet, and supports additional cabinets. It is expandable, if future growth demands the need for more keys, modules or add-on cabinets can be added to increase the capacity of the system. It has 6, 8 & 16 location smartKey modules, card/credit card module, single and dual locker modules.

Remote apartment unit to add 1 internal door (up to 100 in the same BUS). 2nd reader option. 2 locks time setting (2 and 5 seconds). 9 module A type DIN box and backup battery facility.

64kbyte. Red colour.

CyberLock CyberKey Vault 20 FX are beneficial for users who want to automate the process of checking in and out keys. The management software, CyberAudit-Web, tracks when a CyberKey is dispensed and when it is returned to a vault. Upon return, the vault downloads the key’s audit trail and reverts it to an unprogrammed state making it available for the next user. All vault and key activity is managed by CyberAudit-Web software and can be viewed by system administrators.

ScramblePad keypad/reader provides a very high security approach to access, because the ID code or PIN number cannot be accidentally shared with, or stolen by, onlookers. Dual Technology Readers. ScramblePad with built-in Proximity Reader. Uses Motorola, Indala & HID Cards & Hirsch controller.

Morse Watchmans KeyWatcher Touch 6 Horizontal Key Module is an electronic cabinet system that allows for more mounting options, such as under cabinets or on counter tops. It accepts all standard KeyWatcher modules. It has 6, 8 & 16 location SmartKey modules, Card/Credit Card module, Single and Dual Locker modules. It is expandable, if future growth demands the need for more keys, modules or add-on cabinets can be added to increase the capacity of the system. It comes standard with the bottom mounted control box, but can be used with a remotely mounted keypad and display box.

The design of Integrated Engineering’s SmartID™ readers reflects a movement towards the design and material requirements of modern architecture. SmartID™ provides contemporary designs in two shades of stainless steel, together with an easy way to manage the accessibility of critical places, people, goods and information, both for today and the future.  Offering a full product portfolio including SmartID™ ISO 14443 (up to level 4) readers:Mifare® serial number reader Mifare® read/write sector reader (optional 12 key pin pad) DESFire® reader (Common Access Card compliant) T=CL readerOther Smart ID™ standards include Hitag and EM4102.All readers are available with interfaces for the following output protocols: ISO 7811 (ABA / Clock & Data) and Wiegand, and seamlessly integrate with standard U.S. and European junction boxes.  In addition, the SmartTOUCH™ model combines smart card and biometric technology assuring both information and physical security.  This simple-to-use ‘dual authentication’ solution is achieved through the combination of a Mifare® and a fingerprint reader.  SmartTOUCH™ is uniquely programmed using a secured enrolment card instead of a PC.

The ACS-8 communicates via the communication module with the connected RS485 users. In the communication module 2 separate RS-485 interface drivers are included as standard. A maximum of 32 users (see chapter headed "Module BUS users") can be administered at the same time.

CKS-F10 is a recharging station designed to recharge the lithium-ion polymer battery in rechargeable CyberKey smart keys.

The Keyscan CIM establishes communication links for each control panel with CAN Bus communication protocol using one twisted pair cable for server to ACU communication and another twisted pair for global communication, all standard CAT5 cabling.

IOCB1616 module has 16 inputs and 16 outputs Connect up to 4 IOCB1616 modules per access control unit for a total of 64 assignable inputs and 64 assignable outputs Input/output assignments are programmed via dedicated interface screens on System VII Client software Permits "and" & "or" logic statements Selectable input settings – non supervised or digital, single end of line supervision, or double end of line supervision Add up to 2 optional OCB-8 relay boards for form "C" contact outputs IOCB1616 includes (1) standard Keyscan enclosure, (1) IOCB1616 circuit board, and (1) DPS-12 power supply Enclosure can accommodate up to two IOCB1616 circuit boards with up to 4 optional OCB-8 relay boards Compatible with CA4000 or CA8000 controllers only Additional modules (IOCB1616B – board only) are available

The interface converter serves as an interface between PC and RS485 network in access control and time recording systems. A maximum of 8 control units / terminals can be connected. This interface converter is equipped with one RS 232 interface connection on the input and two RS 485 interface connections wired in parallel (option between three-wire and five-wire) on the output. In addition, it is provided with a power supply unit (built into the RS 485 plug output) with 12V / 0.8A DC.

One System for all needs The system architecture allows the equipment to be used as a stand-alone Access Control and/or Intruder system which can be expanded up to networked PC controlled Global Systems. Integrated SystemsThe system is very flexible allowing integration with a number of disciplines including Access Control, Intruder, CCTV, Fire, Lighting and numerous other control systems. Multi Site Systems Networking is based upon standard IP connectivity architecture making implementation very simple across sites.Modular SoftwareSoftware is tested to the highest level prior to release.  As and when the software is installed and / or expanded using additional modules, assistance from factory technicians is always available to give remote or on site support.

CEM SYS/650/064 is an AC2000 Lite System Server - Dell Server with 64 door licence.

Proximity reader/controller. Programming via master code. LED and audible status indicators.

Morse Watchmans SmartKey Locker systems is the solution for securing, controlling and tracking larger objects. It is engineered for complete interactivity with other business systems. It is designed with scalability in mind, each additional metal locker storage unit can be controlled by a single console and monitored by the advanced Key Pro software.

Parabit 200-10139 is a ACS-1E power supply.

Keyscan’s NETCOM2P and NETCOM6P (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate over a network. Both NETCOM2P and NETCOM6P (encrypted) communication modules connect directly to the ACU or, for legacy systems, the CB-485 communication module allowing you to establish communication along an existing LAN/WAN network.

Connects via a USB port on the PC Once connected to the RS485 data line, plug into a USB port on the server PC and the control units will automatically be detected Suitable for wall mounting Black plastic enclosure

The new Linux based 1Ghz processor ensures the 1:3000 comparison time less than 0.5 second. The WiFi function ensures power on to work, and realize the flexible installation of the device. Your mobile device will be the key with bluetooth function and you can realize shake open with ekey APP. The long life battery ensuring up to 10 hours portable application. The touch active sensor ensures the quick response for each detection and saving the total power consumption of the device. The Colorful LCD screen ensures the best interaction and user experiences and can also provide clear notifications to the users. The Webserver ensures the easily quick connection and self management of the device The web based cloud application let you access to the device by any mobile terminal from anytime and anywhere.

Parabit 200-10001 is an override switch.

Designed in mind for high-risk industry settings, the EX-Switch family will work well in mines, refineries, oil-rigs and more, withstanding dust, water, oil, grease and other extreme chemical materials.  In-doors or out, the Tactile Switch line tolerates flammable conditions and is resistant to sparks.The reliable and robust switches are encased in an elegant design within a modern case.  Being extremely tactile the switches seamlessly respond to the touch of a finger with no moving parts, enabling high reliability.  Programmable illumination choices of brilliant red or vibrant green can be set against a no-illumination status indicator using jumper settings.  The switches feature solid state, soft touch, piezoelectric Switch Technology, two operation modes; toggle or an adjustable output time of 1-to-60 seconds, and field selectable illumination states.  The piezoelectric switch generates a dry contact N.O and N.C relay pulse at the touch of a finger.These features and more make the switches ideal for many demanding applications; from heavy machinery and mechanical operation panels, to access control systems or direct door control.The EX-06/16 mounts directly onto a standard US size gang switchbox.  They are crafted to the highest manufacturing standards out of the finest materials under Rosslare's ISO 9001:2000 and 14001:2004 Certified Quality Standards.

MK-01, a CyberKey authoriser mini-keyport is part of the CyberKey authoriser system.

AH-W1 is a CyberKey web authoriser hub allows programming and downloading keys from a remote location. The web authoriser hub allows remote key communications either via LAN or over the internet.

A central interface between a panel and the door Provides data and PoE power for the monitors The ports can also be used to expand the network of panels and monitors through Entry extension switches or to connect the control unit to a Net2 system running Net2 v4.25 or later

Parabit 200-10136 is a ACS-1 power supply.

Iris recognition system combing remote optical units, enrolmwnt units and identification control unit. Recognition speed:

Card enrolment station (without card reader) to enroll cards into a PC with software such as MOMENTUM, Velocity, SAM or S*NAP2.  Use with compatible reader heads.  Includes MATCH2, ES2 enrolment stand, cables and plug-in power supply.

CK-IR7-ROHS is an user key with replaceable battery and tip.

Parabit 900-00002 is a flush mount phone with keypad that features: Aluminum and stainless steel construction Handset composition: lexan Vandal resistant construction

Parabit 900-00008 is a flush mount inmate phone that features: Stainless steel and galvanized steel construction Black lexan handset with 36”armored cable Power transformer: 12VDC 1.5A Phone line not required Chrome plated cast metal mechanical hook-switch Vandal resistant construction

CEM SYS/650/128 is an AC2000 Lite System Server - Dell Server with 128 door licence.

Mifare reader with keypad, and with RS485 interface, 3-5 cm reading distance. Model 026494 available without keypad. It comes with date/clock interface.