Access control systems & kits  (537)

The DRI provides a local interface between an Advanced Central Controller (ACC) and up to 2 card readers installed as entry and exit readers for a single door. This allows the DRI to receive information regarding the identity of a cardholder requesting entry or exit at a locked door and then sends the identification data to the ACC for processing. When a cardholder presents their access card at an entry or exit reader (connected to a DRI), the DRI interprets the encoded information and sends this data to the ACC. The ACC then checks the validity of the cardholder. If the appropriate permissions have been assigned, the ACC then sends a message back to the DRI allowing it to unlock the door and provide passage.

64 readers.

Reader Module for PC-based Granta series.

Reader Module for PC-based Wiegand Granta series.

To further increase freedom of movement within access control systems, Bewator have introduced a range of proximity readers to enable contactless access.  A built-in keypad offers the possibility of combined access control with both a card and a PIN for higher security.  Two versions are available - one as a stand-alone application and another as a reader head for other access control systems.  Its robust metal casing protects the reader against tampering and vandalism.

One of the reasons for the flexibility of Siemens SiPass access control systems is the comprehensive range of readers and reading technologies available which includes everything from magstripe readers to hands-free loop readers, ensuring options to fit a multitude of environments and security levels. Tested and qualified for use with SiPass systems, the readers and cards also work with virtually any access control system on the market. Cotag Cotag is a proprietary Siemens technology which can read both active (long-range) and passive (proximity) cards and tags, allowing both to be mixed within a single system. For applications such as hospitals or warehouses, or where the disabled may have difficulty presenting proximity tags to readers, the battery embedded within Cotag active cards can offer a truly hands-free access control environment. Smart card With cards increasingly being used to perform a number of different functions, Siemens' Smart Card option offers the storage capacity to hold additional data. This means they can be used beyond just their access control function; they can also be used as a cash card at company restaurants or vending machines, for example. The capability to store biometric data, such as fingerprint templates, makes this a particularly effective option for high security applications. 125 kHz proximity Since proximity cards only need to be held near the reader rather than swiped, the lifetime of the card is extended due to reduced wear and tear in a system which offers increased security compared to magstripe technology. Some of Siemens 125 kHz proximity readers support the SiPass algorithm which offers a higher level of security than conventional 125 kHz. Magnetic stripe Cards which are swiped through a slot on a reader are the least expensive option and are largely employed when extending a system which already uses magnetic stripe technology. Communication protocols SiPass readers communicate with the door controllers either via standard reader protocols or via Siemens own proprietary reader protocols - BC-Link and CerPass/UCI (RS485). The Siemens proprietary protocols are bi-directional so they can be used for buzzer control, LED feed-back and arming/disarming of an intrusion area. Installation is also faster as less wiring is required.   -Link and CerPass/UCI also provide constant monitoring of reader status and higher security levels compared to standard protocols. To view the entire range, please see the new Siemens SiPass Readers and Cards brochure.

Vanderbilt (formerly known as Siemens Security Products) 633-2 is a cotag programmer that enables individual requirements for programming active and passive Cotag cards and tags. It makes it possible to program small batches or individual cards and can be used to create configuration cards to set up any Cotag readers. The programmer can also be configured for an end user‚ so that the customer himself has local control over card issuing.

For use with DC21 controller only

Door kit contains one ADD5100 dual reader interface and two PR500-Cotag readers.

The HD500-Cotag Door Kit includes: One DC22 door controller One HD500-Cotag reader

16 time zones, backlit LCD screen, 500 event log with print-out facility

Door terminal card reader with keypad inc. junction box for use with any SR32 controller.

The ACT 56k Modem allows access to ACT controllers (ACT2000 and ACT1000) over the telephone line. ACTWinPro can configure and monitor sites many miles away from the PC. This modem must be used at both the controller end and the PC end. The modem comes with pre-configured for ACT Controller operation and with cables for connecting to the controller. The modem may also be connected to a RS-485 interface to control more than one controller. Software is also provided to allow easy installation at the PC.

Proximity and Magnetic Stripe card readers providing free-flowing security with minimal restrictions: - For use on a single door Memory for 1000 cards Can be upgraded for use in Bewator Entro multi-site online system Allows freedom of movement with effective safeguards Simple to install Freedom of MovementBewator Compact Cardreaders are stand-alone readers, both work either as a high quality Magnetic Stripe or Proximity Reader. Both are easy to install and provide a high level of security, whilst maximizing freedom of movement within a business environment. Both are suitable for indoor or outdoor use, being manufactured to very high standards. UpgradeAs an organization grows, the Bewator products range grows with you. Compact Cardreaders can be used as standalone readers, or they can be upgraded for use within Bewator Entro PC based, multi-site access control system.

IO

1 reader type BC16, BC5280, BC5291 & BC5311 only.

16 time zones, backlit LCD screen, 500 event log with print-out facility

The SiPass Entro PR500-Cotag Starter Kit includes everything you need to set up a four-door access control system. This kit can easily be complemented with up to four additional door kits to create a larger system. Vanderbilt' Cotag technology is unique on the market in that it can provide both proximity and hands-free card reading in the same system. All Cotag readers can read both active (long-range) and passive (proximity) Cotag cards and tags‚ and both types of cards/tags can be mixed in the same system to provide ultimate convenience and cost-efficiency.The kit includes:- One SR35i/8+8 segment controller- SiPass Entro software – Standard edition- Four DC22 door controllers- Four PR500-Cotag proximity readers

2048 readers.

16 time zones, backlit LCD screen, 500 event log with print-out facility

Door kit contains one ADD5100 dual reader interface and two SP500-Cotag readers.

The kit contains one each of the following:*AP01M-2420*VR40S-MF

Advanced door central for one reader, inc priority group, alarm bypass control and lock monitoring.

Door kit contains one DC800 controller, one PR500-Cotag proximity reader and one BA112 power supply unit.

Door kit contains one DC12 controller and one BC16 reader.

For system extension/remote sites.

The AKN4100 is a networked access controller and up to 16 readers can be controlled by it. The network allows the configuration and maintenance from a single PC. The access control is locally made by each Dual Reader Controller, which each controls up to 2 readers for 1 or 2 doors. The AKN4100 software is able to manage up to 500 persons. It provides also up to 12 programmable time schedules and up to 19 programmable holidays. The AKN4100 can connect up to 8 dual reader controller in the network.

Door kit contains one DC12 and one PM500-Cotag panel mounted card reader.

Door kit contains one DC12 controller and one HF500-Cotag hands-free reader.

The kit contains one each of the following:*AP01M-2420*VR10S-MF

The kit contains one each of the following:*AP01P*VR41S-MF

Dual Pin Pad.

16 time zones, backlit LCD screen, 500 event log with print-out facility

Door kit contains one DC800 controller, one HD500-Cotag heavy duty card reader and one BA112 power supply unit.

Package includes lite blue Reader Controller with 3A Power Supply, (2) VP-300 Proximity Mullion Mount Readers and (10) VPSC-1 Proximity Cards (Clamshell).

Upgrade to full bright blue 32 door capacity; includes I/O backplane with enclosure and for easy wiring.

Memory expansion module

drum for all door to controller connections, 100m

The SiPass Entro HD500-EM Starter Kit includes everything you need to set up a four-door access control system. This kit can easily be complemented with up to four additional door kits to create a larger system.The kit includes:- One SR35i/8+8 segment controller- SiPass Entro software – Standard edition- Four DC22 door controllers- Four HD500-EM heavy-duty proximity readers

Door kit contains one DC800 controller and one PR500-EM proximity reader.