Access Controllers  (701)

Duress mode function.  Guard tour management.  Check supervisory signal from reader (cut off check).  Alarm event monitoring using tamper switch (by application software).  Communication status via LED indicator.

Provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability When combined with Symmetry security management software, provides a seamless security management system Controls up to 16 doors and readers using separate door controllers Manages 50,000 card holders Provided with an on-board Network Interface Card (NIC) and new communications protocols which allow considerably faster data upload and download times than conventional access control panels Integrated AES encrypted 10/100 Mbps Network Interface Card Connect smart card, proximity or legacy magstripe readers using multiNODE current loop protocol (MCLP) Wiegand interface available Failover modem interface provided FICAM Approved (Symmetry Homeland v8)

Provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability When combined with Symmetry security management software, provides a seamless security management system Controls up to 16 doors and readers using separate door controllers Manages 250,000 card holders Provided with an on-board Network Interface Card (NIC) and new communications protocols which allow considerably faster data upload and download times than conventional access control panels Integrated AES encrypted 10/100 Mbps Network Interface Card Connect smart card, proximity or legacy magstripe readers using multiNODE current loop protocol (MCLP) Wiegand interface available Failover modem interface provided FICAM Approved (Symmetry Homeland v8)

AMAG Symmetry M2150-2DC 2DC is a door controller that extends database unit and database controller to support up to 16 readers. The multiNODE M2150 range of controllers provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

The Symmetry EN-LDBU controller provides distributed intelligence and allows ASSA ABLOY Aperio™ wireless locks to be fully integrated into a Symmetry Access Control System. Aperio wireless locks enable additional doors such as individual offices, meeting rooms and store-rooms to be added cost effectively to an access control system.

Duress mode function.  Guard tour management.  Check supervisory signal from reader (cut off check).  Alarm event monitoring using tamper switch (by application software).  Communication status via LED indicator.

AMAG Symmetry G4T-M2150-002 8DC is a door controller that extends database unit and database controller to support up to 16 readers. The multiNODE M2150 range of controllers provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

AMAG Symmetry G4T-M2150-025 4DC is a door controller that extends database unit and database controller to support up to 16 readers. The multiNODE M2150 range of controllers provides distributed intelligence for your access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings while maintaining a low cost of ownership.

Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors 12V lead acid battery back up

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

2 x 6 keypad layout, Outdoor or Indoor, surface mount.

RFID MIFARE® compatible door controller with keypad Provides proximity access for up to 600 Code/Card Clients, including 2 Panic Clients Pulse Mode allows an adjustable re-lock time to be set between 1-99s (5s default) Latch Mode enables passage functionality allowing Code or Card Client free access Dual Authorisation requires a valid Code and Card Client to be presented in order to allow access Reader Mode where the unit acts as a Wiegand reader linked to another unit LED status indicators and backlit keypad The Door Airlock function allows two door controllers to be linked. For example, the first door will require closing before the second door can be opened Configurable penalty time Anti-tamper sensor Surface mounted Conforms to IP66

The elegance of an ultra-slim flush-mounted look without the need of a flush mount bracket.  This unique controller is only 6 mm thick.  The PIEZO-ELECTRIC metal buttons residential, commercial, high traffic, and public locations.  The unit resists the elements such as glue, oil, rain, ice, snow.  This unit has added security with the addition of the PS-15T Secure Power Supply (required).

3 x 4 keypad layout, Outdoor or Indoor, surface mount.

Symmetry G4T-M2150-043 2DBC controller supports 20,000 cardholders (expandable to 250,000) and up to 16 card readers with the addition of optional door controllers. Includes integrated RS232 port. Door input and output controllers connect using RS485.

RFID MIFARE® compatible door controller Provides proximity access for up to 1000 Card Clients Pulse Mode allows an adjustable re-lock time to be set between 1-99s (5s default) Latch Mode enables passage functionality allowing Card Client free access Configurable penalty time Anti-tamper sensor Can be flush or surface mounted Conforms to IP66

Combines both the single door controller and a video recorder into one unit Two 2.5" hard disk drives can be installed in a RAID1 arrangement for storing footage Provides storage & processing for up to four third-party IP cameras Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors

Keypad Lock by Try-out Error Alarm Function.  Duress Alarm Function.  Toggle Mode for Door Opening / Closing.  Lock Control by Door Sensor.  Safe (default) / Secure Mode available.  Dual Tamper Switches.  Chime Bell Output.

Switch2 is a single door control unit. The control unit stores the access permissions of the user and is mounted within the building. This makes the system suitable for high security applications.

RFID MIFARE® compatible door controller with keypad and doorbell connections Provides proximity access for up to 600 Code/Card Clients, including 2 Panic Clients Pulse Mode allows an adjustable re-lock time to be set between 1-99s (5s default) Latch Mode enables passage functionality allowing Code or Card Client free access Dual Authorisation requires a valid Code and Card Client to be presented in order to allow access Reader Mode where the unit acts as a Wiegand reader linked to another unit LED status indicators and backlit keypad The Door Airlock function allows two door controllers to be linked. For example, the first door will require closing before the second door can be opened Configurable penalty time Anti-tamper sensor Surface mounted Conforms to IP66

Provides 10/100 Ethernet or direct connect RS-232 to host PC with XBox globalization to downstream controllers.  Provides up to 115KBps RS-485 and AES (128-bit Rijndael) encryption between "N2" controllers.

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors Two reader inputs for read in/read out control Housed in a small plastic enclosure

Operation Time of all I/Os programmable by keypad.  Keypad lock by try-out error alarm function.  Chime bell output.  Tamper switch.

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

Combines both the single door controller and a video recorder into one unit Two 2.5" hard disk drives can be installed in a RAID1 arrangement for storing footage Provides storage & processing for up to four third-party IP cameras Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors

Infineon's SLE 66CUX640P controller is for use in all USB applications, ranging from USB-enabled smart card readers/cards to USB dongles.

2 door boxed controller which can be used with all Easi and PAC readers including AVR and the PAC wiegand interface. With eight time profiles, Boxed, pre-wired in a metal case, with cutout . 1,5 Amp PSU with alarm monitoring.

Controls a single door and provides additional I/O for general use Distributed intelligence architecture, no central point of failure Connector port to cascade up to three Paxton10 connectors Two reader inputs for read in/read out control

Baran Advanced Technologies, manufacturer of the Everswitch access control products, introduces the Everswitch ATP2 family of products. It is another first from Everswitch: a fully sealed polycarbonate Piezo keypad with or without an integrated HID reader, either 125 KHz or 13.56 MHz. Inside the keypad is the same innovative patented Piezo technology that is used in the Everswitch rugged metal vandal-proof keypads. This design is fully weatherproof, IP68 dust & waterproof rated, and has no moving parts.The ATP2 comes with a variety of product features such as background illumination and choice of keypad colour. The ATP2 operation temperature is from -4 F (-20 Celsius) and up to 167 F (75 Celsius). These keypads feature a single gang back plate.

Open Architecture Communication Protocol. Expandable up to 24000 Cardholders. Stores up to 4000 transactions. Supports RS-232, Optically Isolated RS-485 and Dial Up Communication. 16 Elevator Floors. MicroELV controllers can be installed with existing LiNC-NET system. Can also intermix with Ultimate Series, IQ Series and SIM Series controllers.

Boxed Easikey 250 (pre-wired controller in a metal case with cut-out & 3.0 Amp PSU

The PAC 512 controls all aspects of two secure doors, with up to two card readers installed as entry and exit readers on each door. This includes support for a door strike to lock and unlock the door and a door contact to detect the doors position.

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

Supports 2 fingerprint reader units Dual channel Wiegand output AC/DC or PoE+ power options LED indication for clear operations Integration into existing systems

High security 5-State Alarm monitoring. Optional onboard Ethernet Communication. Real time Diagnostic Display. Supports virtually all reader types.

Symmetry MN-DBU-PLATE is an adapter plate to mount EN-LDBU in ENC1 enclosure. The Symmetry EN-LDBU controller provides distributed intelligence and allows ASSA ABLOY Aperio™ wireless locks to be fully integrated into a Symmetry Access Control System. Aperio wireless locks enable additional doors such as individual offices, meeting rooms and store-rooms to be added cost effectively to an access control system.

Dual tamper switches.  Alarm event monitoring using tamper switch (by application software).

CEM DCM/330/101 is a two-door controller designed to interface third-party read heads with the CEM range of access control systems. It also combines Power over Ethernet Plus (PoE+) connectivity, which powers door furniture and two heavy duty maglocks via a single CAT 5e/6 network cable. Feature includes: Intelligent two door controller supporting 3rd party read heads Support for two doors Onboard 10/100Mbps PoE+ Ethernet connectivity to power door equipment via a single CAT5e/6 cable - no local mains required Communicates directly with the central AC2000 access control system Database supports 200,000 cardholder records for off-line card validation