Access Controllers  (701)

High security 5-State Alarm monitoring. RS-485, Auto-dial or LAN/WAN connectivity.

High security 5-State Alarm monitoring. RS-485, Auto-dial or LAN/WAN connectivity.

RS-485, Universal / Wiegand Reader Interface, 12 V DC, 60 mA, 65 x 20 x 25, -10 ~ +55, 0 ~ 90, IP67, High security module

CEM DAC/390/064 is a 64 doors intelligent networked device for door entry/exit control and alarm monitoring. Feature includes: Intelligent embedded network device for access control and alarm monitoring with the CEM AC2000 system Supports up to 64 doors (128 readers IN/OUT) Battery backup available in case of power failure 64 MB compact flash for database with expansion available Storage capacity for up to 250,000 card records

CEM DAC/390/032 is a 32 doors intelligent networked device for door entry/exit control and alarm monitoring. It further features: Intelligent embedded network device for access control and alarm monitoring with the CEM AC2000 system Supports up to 32 doors (64 readers IN/OUT) Easy software upgrade to S9064 Controller supporting 64 doors Battery backup available in case of power failure 64 MB compact flash for database with expansion available Storage capacity for up to 250,000 card records TCP/IP based diagnostics/monitoring available via web browser or Telnet Database is retained even in the event of battery backup failure

Fingerprint identification standalone access controller, IP-FGR007HA offers a cost-effective access control system for high security requirement.IP-FGR007HA has been developed for those who crave simple instillation but still want a high-level security system.  It is perfect for areas such as small offices in buildings or small factories with less than 100 users.  With rapid and accurate identification, IP-FGR007HA perfectly secures your area at an affordable price including 10PCS IPC80 Proximity card and RS232C Stereo Jack.  You might choose operation mode (RF only/ Fingerprint only/ RF + Fingerprint) for you references.  Also, Fingerprint registration is possible via Master card or ENROLLMENT PRO 2006 Software offered by IDTECK.Key FeaturesCompact Design:  Made to fit door frame of any kindAccurate Identification (Auto touch sensor):  0.001% False Acceptance Rate125Hz Proximity and Fingerprint RecognitionUpload/Download Fingerprint Templates using NotebookFirmware Upgrade via S/W High Quality Optical SensorHigh Protection from Scratch and ESD (Electro Static Discharge)

4 Reader ports  8 Form C control relays  10 Supervised/unsupervised inputs  F/2F & Supervised F/2F protocol support  Supports additional RS-485 downstream hardware Plug for plug compatibility to Casi M2000  AES 128 bit data encryption

AES 128/256 Data Encryption UL 294 recognised, CE compliant, FCC, RoHS Easily integrates lighting, heating/ cooling, door or elevator control systems Initiates commands by operator, by time schedules, or by events Built-in capacity to control and respond to external device commands Allows the clustering of up to 16 uniquely monitored devices easily and compactly RS-485 host connectivity

Comes with a 1 year Warranty.

Direct Control of Door Lock.  Power Fail Safe or Power Fail Secure Locks selectable.  Firmware Upgrade via S/W.  Solid Epoxy Potted.

High quality optical sensor.  100 fingerprint user.

The S9032 Lift Controller is designed to be an integral component of the AC2000 integrated security management system. It is designed to offer the ability to control the floor access of either one or two lift cabs, each of which can support access to up to 128 floors. 

PKI Option.  Protected PIN.  LAN Port: Ethernet TCP/IP (10/100).  Serial Ports: RS-232, RS-485.  Wiegand Port: 75 bit with parity standard (user programmable up to 128 bits).  Durable ABS housing.  Reads contact or contactless MIFARE or DESfire smart cards.  Mount type: wall or desk stand.Biometric Fingerprint Reader:  INCITS 378-2004 Interoperable Minutiae AlgorithmFingerprint Sensor: Silicon (500dpi), 320 x 480FRR: 0.01% - 0.001%FAR: 0.01% - 0.0001%Contact Smart Card Reader: ISO 7816Contactless Smart Card Reader: ISO 14443-A, BIncludes CD with configuration software.

Direct Control of Door Lock.  Power Fail Safe or Power Fail Secure Locks selectable.  Solid Epoxy Potted.

Dual Ethernet capability Multiple card format support  Universal I/O device characterisation  AES 128/256 Bit Encryption and TLS  Large encoded card number support

Direct control of door lock.  Power fail safe or power fail secure locks selectable.  Firmware upgrade via S/W.  Solid epoxy potted.

CEM IOC/000/008 is a 16 floors lift control intreface designed to be an integral component of the AC2000 integrated security management system. It is designed to offer the ability to control the floor access of either one or two lift cabs, each of which can support access to up to 128 floors.

125KHz Proximity / PIN and fingerprint recognition.  Dual function for Access Control and Time & Attendance.  1,000 / 2,000 / 4,000 fingerprint users / 26,000 event buffers.

CEM IOC/010/000 is an ethernet input output controller provides a flexible means to monitor and control an array of equipment. It features: Ethernet connectivity to host 16 Inputs (2 or 4 state) 8 Outputs (4 Relay NO/NC and 4 Open Collector) Outputs can be mapped to single or multiple inputs on the same controller or across the network Dedicated tamper input Designed for ease of installation and maintenance using 2 part connectors throughout Backup battery connection for emergency power (optional)

CEM IOC/000/010 is a 64 floors lift control interface that allows seamless control and monitoring of access between elevator floors. Depending on how many floors need controlled, each lift must have a Lift Control Interface (LCI) unit, which is used in conjunction withthe CEM S9032 lift controller.

 8 reader capacity supporting multiple open reader technologies  Universal I/O device characterisation AES 128 bit data encryption

CEM IOC/000/009 is a 32 floors lift control intreface designed to be an integral component of the AC2000 integrated security management system. It is designed to offer the ability to control the floor access of either one or two lift cabs, each of which can support access to up to 128 floors.

AES 128/256 bit data encryption UL 294 recognized, CE compliant, FCC, RoHS Configurable input parameters Initiates commands by operator, by time schedules, or by events Allows for easy and compact clustering of up to 16 uniquely monitored devices RS-485 host connectivity

Ethernet / 10/100 Mbps, Universal / Wiegand Reader Interface, 12 V DC, PoE, 800mA, 104 x 290 x 51.8, 0 ~ 50, 10 ~ 90

The ADA-10 module is intended for applications where secure control of a remote electrical load, such as a door strike, is requried. The card reader encodes the output control information into a digital data stream, which the ADA-10 must decode before switching the load. Digital secured control from reader or controller to door strike. Signal is decoded at strike/Simple installation. Up to 16 unique addresses are decoded by the ADA-10 receiver. Digital receiver mounts behind the strike. Potted and hermetically sealed unit for reliable and intrinsically safe operation. Low cost/Low power/Occupies little space. Sender is built into card readers. Sender output communications link has a high noise immunity using a continuous digital data stream. Sender to receiver can be up to 1000 feet (300 m.). Single pair twisted cable 20-22 AWG.    

IDTECK, Inc. is planning to launch their next-generation independent multi-Modal biometric access controller, MAC2000 with its enhanced security and reliability features.MAC2000 system is revamped with the advanced highly accurate optical fingerprint biometric modules to reinforce the weakest links of security access control that are commonly breached by unauthorised use of reader cards and identity theft. MAC2000's highly reliable authentication is achieved by implementation of the new advanced facial recognition algorithm patented both in Korean and the U.S. The system allows the users to define their own environment settings and system configuration for RF card (or PIN), password entry, and/or biometric (fingerprint/facial) authentication method(s) in any combination. The notable new feature is the live video recording capability of the MAC2000 that can be used effectively to identify any unregistered or unauthorised person(s) attempting to access the premise.Packaged in a further refined and more stylish look, MAC2000 also offers more convenience and safety features with the enhanced internal design upgrade including the increased ESD-protection circuit and the Power over Ethernet (POE) making the installation a breeze. The proven Windows CE operating system, which reliably utilises all these bells and whistles with efficacy, further appeals to the new users with its pedigree of familiar and friendly user interface.It is evident that IDTECK, Inc. has been manifested itself as one of the global leaders in the security access control market. Their proprietary RF card and biometric access control products have been globally recognised and are now installed in 170 countries around the world. Nevertheless, their goals are yet to be fulfilled as they continue to relentlessly march forward with their new "ammunitions" reaching for the culmination of their endeavour in the security access control technologies.

TDSi's EXpander 2 is a 2 door expansion module for EXpert. It is suitable for both EXpert² master and slave enclosures and delivers great flexibility and scalability.

The M5-MUX8 multiplexer device is designed to a replace a legacy Casi M Series 8RP to a single communications port that supports up to eight (8) external, two wire, RS-485 based channels. Allows replacement of F/2F readers, one per interface port  Supports up to eight (8) MR50 series controllers  Eight 2-wire RS-485 communication ports

AMAG multiNODE M2150 range of controllers provides distributed intelligence for access control system and ensures complete system security, resilience and reliability. When integrated with Symmetry security management software, the M2150 controller range delivers a seamless security management system to protect all types of buildings.

64 reader capacity  Supports 600,000 cardholders  Multiple card format support  Universal I/O device characterisation  AES 128/256 Bit Encryption and TLS  Large encoded card number support  Multi-brand wireless lock support

The Ethernet Input Output Controller (EIOC) is an addition to the Ethernet suite of devices for use on the AC2000 system.  Connecting to the nearest network point the EIOC provides a flexible means to monitor and control an array of equipment.  The EIOC features 16 analogue inputs and 8 digital outputs.

2 Reader ports 6 Programmable Outputs (5Vdc)  4 Configurable Inputs  Multiple reader protocol support  Plug for plug compatibility to Casi 2RP  AES 128 bit data encryption  Configurable input parameters

16 programmable digital outputs  (solid state switches) Plug for plug compatibility to Casi 16DO AES 128 bit data encryption

The CAA-482P has 16 inputs, one for each control relay of the CAA-480A elevator controller and eliminates elevator cab tailgating. Each user must present their card to select a floor button. Once a card is presented, the user can only select one floor. Once the floor is selected, all other floor selection buttons are deactivated. The user must present his card again in order to select another floor. Every presentation and floor selection is stored by the system which also registers valid and invalid transactions. Inputs: 16 inputs for choice Response time for input: 700ms Connection: direct connection to the CAA480A lift controller for floor selection

2 Reader ports 6 Programmable Outputs (5Vdc)  4 Configurable Inputs  Multiple reader protocol support  Plug for plug compatibility to Casi 2SRP  AES 128 bit data encryption  Configurable input parameters

DNT00002A is a 1-channel visor transmitter with visor mounting clip.

Linear MCS306010 1-channel key ring transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches.

 8 Reader ports  8 Solid state programmable outputs (5Vdc)  F2F & Supervised F2F protocol support  Plug for plug compatibility to Casi 8RP  AES 128 bit data encryption

Linear MCS308911 1-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.

Linear MCS412001 2-channel visor transmitter is compatible with 300 MHz Multi-Code receivers and has easy access to battery and coding switches. It is supplied with visor clip.