Access Controllers  (701)

With enclosure Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi connectivity and can be configured in two user-friendly operational modes. The KT-2 can be used with the powerful EntraPass Security Management Software to provide more advanced and fully integrated access control features such as Wi-Fi connection. The addition of the built-in Wi-Fi antenna reduces installation time and costs while providing an ideal solution for projects with infrastructure designs that would traditionally require extensive cabling. Alternatively, the KT-2 builds on the KT-1 by continuing to support Standalone Mode, offering basic two-door security functions without the need to purchase or connect to a security management software.

This fused relay board provides 8 - FormC relay outputs fused at 1A.  The module requires a constant +12V and a switched negative for activation of each relay.  Connects to the open collector output number 2s of the 1042/44 and mounts in the expansion slot of the 1040E enclosure.

Single channel RS-232 to RS-485 converter for master or slave communications. 

The PW-Series family of access control modules are controlled by and connected to the intelligent control module. The access modules have been designed to allow for a modular customizable solution. The PW5K1R1 provides I/O support for a single card access reader.

The SALTO CU50EN is an on-line IP door controller that can have 1 or 2 wall readers connected and has 2 control relay outputs. Access control changes can be carried out on the SALTO software and are then actioned at the door controller in real time. It provides full on-line features via the networked Ethernet / WIFI link such as door monitoring status, remotely controlling door opening and Roll Call.

6 channel RS-232 communications mux for multiple slave channels using RS-232.

The LNL-1000 Intelligent System Controller (ISC) by Lenel serves as the access control engine for a Lenel OnGuard system.  The ISC provides power, performance, and flexibility for the most demanding applications.  Multiple combinations of Input Control Modules, Output Control Modules, and Card Reader Interface Modules can be attached.

128K memory.  Controls two doors and easily links to a network.  Automated trouble reporting. UL294, CE and FCC certified.

Four reader control panel with enclosure, transformer and suppressors.

ISONAS mullion reader is mounted to this convenient desk stand, which is useful for creating an enrollment reader.

Mullion Trim Kit is used for mounting a mullion reader-contoller onto a single gang electrical rough-in box.

The KT-100 firmware program is stored in flash memory for easy upload from the owrkstation without changing memory chips.  Using a TCP/IP interface module, the KT-100 can be connected to a LAN/WAN network.  Mounts on the secure side of a door, reducing the length of cable requred. Includes connections for 2 card readers, lock device, door contact and request to exit.  Can be easily mounted on a single gang box (flush mount) or on a surface back box.

Networkable, 2, Offline Capabilities, Networkable, RS-485/RS-232, 16 inputs, Universal / Wiegand Reader Interface, 150, 24 V AC, 50 x 98 x 394, 6 kg, 2 ~ 40, 0 ~ 90

With enclosure, PSU Powerful cyber-hardened network door controller for 16 readers Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

With enclosure, no PSU Powerful cyber-hardened network door controller for 8 readers Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

The PW6101 series intelligent controller and reader module is a high performance, Ethernet ready, cost effective system capable of controlling a single opening. It is an ideal IP PoE solution for new construction and other facilities that are infrastructure-ready.

Supports 8 readers in plastic enclosure Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory

With enclosure Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

With the SALTO Control Unit Adaptor, it's possible to integrate with third party devices such as time and attendance systems. The Control Unit Adaptor is designed to allow users to update their cards at the reading point that they use on a daily basis, for instance a Time and Attendance terminal. This means you can now access a door with all the convenience of SALTO and control your staff attendance at the same time. The CU Adaptor is connected on one side to any SALTO door controller, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.

The Kantech KT-2 is a two-door controller that supports two readers, incorporates Wi-Fi connectivity and can be configured in two user-friendly operational modes. The KT-2 can be used with the powerful EntraPass Security Management Software to provide more advanced and fully integrated access control features such as Wi-Fi connection. The addition of the built-in Wi-Fi antenna reduces installation time and costs while providing an ideal solution for projects with infrastructure designs that would traditionally require extensive cabling. Alternatively, the KT-2 builds on the KT-1 by continuing to support Standalone Mode, offering basic two-door security functions without the need to purchase or connect to a security management software.

Kantech, part of the Security Products business unit of Tyco, the world’s largest pure-play fire protection and security company, announces the release of KT-1, an intuitive single door IP controller, with a unique one touch set-up that brings true security simplification to the industry. Featuring an attractive and space saving design, the unique form factor of the KT-1 controller can be installed in a variety of locations, from typical door installations in plain view to a traditional security cabinet. “The KT-1 single door controller was designed with installers in mind. All that is needed is an IP connection, and the push of a unique touch-sensitive button to be up and running in minutes,” said Rafael Schrijvers, Product Marketing Manager, Access Control, EMEA for Tyco Security Products. “This elegantly designed hardware combined with user friendly EntraPass software provides the ultimate experience in access control installation — an intuitive user interface and the flexibility and ease of IP and PoE + for single door installations.” With its innovative single button enrolment, KT-1 is automatically detected and enrolled on the security management software. There is no need to manually enter MAC/Serial numbers, making it quick and simply to install. To further streamline the installation process, a single KT-1 controller can also act as a head IP controller’ for more than 30 additional controllers when communicating with the EntraPass software. Installers simply push the touch-sensitive button and it automatically talks to the gateway KT-1 controller, thereby reducing the amount of IP connections needed and substantially reducing security set up time. This one touch set-up, combined with its on-board Ethernet port, Power over Ethernet capabilities and flexible design — featuring interchangeable connections for easy installation or replacement — means the KT-1 controller is extremely simple to install for both security installers and IT specialists. KT-1 also seamlessly integrates with DSC intrusion alarm panels via direct panel to panel integration. When using the EntraPass software, KT-1 can also be integrated with American Dynamics and Exacq video management systems. The KT-1 controller is an ideal complement to the EntraPass security management software (v6.02 and higher), including the EntraPass Web application and the EntraPass Go mobile app, creating a highly scalable solution that installs quickly and provides a superior user experience.

Kantech, part of the Security Products business unit of Tyco, the world’s largest pure-play fire protection and security company, announces the release of KT-1, an intuitive single door IP controller, with a unique one touch set-up that brings true security simplification to the industry. Featuring an attractive and space saving design, the unique form factor of the KT-1 controller can be installed in a variety of locations, from typical door installations in plain view to a traditional security cabinet. “The KT-1 single door controller was designed with installers in mind. All that is needed is an IP connection, and the push of a unique touch-sensitive button to be up and running in minutes,” said Rafael Schrijvers, Product Marketing Manager, Access Control, EMEA for Tyco Security Products. “This elegantly designed hardware combined with user friendly EntraPass software provides the ultimate experience in access control installation — an intuitive user interface and the flexibility and ease of IP and PoE + for single door installations.” With its innovative single button enrolment, KT-1 is automatically detected and enrolled on the security management software. There is no need to manually enter MAC/Serial numbers, making it quick and simply to install. To further streamline the installation process, a single KT-1 controller can also act as a head IP controller’ for more than 30 additional controllers when communicating with the EntraPass software. Installers simply push the touch-sensitive button and it automatically talks to the gateway KT-1 controller, thereby reducing the amount of IP connections needed and substantially reducing security set up time. This one touch set-up, combined with its on-board Ethernet port, Power over Ethernet capabilities and flexible design — featuring interchangeable connections for easy installation or replacement — means the KT-1 controller is extremely simple to install for both security installers and IT specialists. KT-1 also seamlessly integrates with DSC intrusion alarm panels via direct panel to panel integration. When using the EntraPass software, KT-1 can also be integrated with American Dynamics and Exacq video management systems. The KT-1 controller is an ideal complement to the EntraPass security management software (v6.02 and higher), including the EntraPass Web application and the EntraPass Go mobile app, creating a highly scalable solution that installs quickly and provides a superior user experience.

Supports 8 readers in metal enclosure Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory

The S321-DIN Intelligent Controller incorporates advanced technology and flexible features to meet a wide range of security requirements. It uses standard RS-485 communications protocol and supports up to two doors per unit.

Motherboard with PoE module Controls and powers all access control devices at the door to minimise installation costs Power over Ethernet (PoE) module features PoE Plus with enough power for two doors and associated devices Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

Powerful 8 or 16 reader network-ready controller Expanded memory for up to 500,000 cardholders Global and local anti-passback with occupancy control Embedded intrusion zone functionality Retrofits possible with apC adapter plate Onboard battery backup and storage of configuration data using nonvolatile memory Supports both direct readers and RS-485 readers for greater coverage LCD provides important controller status and diagnostics information Supports multiple cards per cardholder and multiple formats for a highly secure, flexible solution Great solution for Universities, Healthcare, and Transportation applications Compatible with C•CURE 9000 and C•CURE 800/8000 

Includes General Controller Module, 1 Access Control Module Trusted Execution Environment (TEE) provides advanced hardware-based cybersecurity protection Hardened Linux embedded OS for improved security and scalability Up to 1M cardholders in local memory Dual GigE network ports with IPv6, DHCP and 802.1X support Onboard 256-bit AES network encryption Supports OSDP Secure Channel for encrypted reader communications Supports Embedded High Assurance FICAM operation without third-party hardware

Supports 16 readers in metal enclosure Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory

Door controller with 128K memory and accessory kit (includes 1.0K ohm (2), 5.6 ohms (10), 120 ohms (2), PCB standoff, lock hole cover, ground wire and screwdriver).  Controls two doors and easily links to a network. Automated trouble reporting. UL294, CE and FCC certified.

The EN-1DBC is a single door edge-network intelligent controller with built in database and network interface card. The controller supports power over Ethernet (PoE) and provides the distributed intelligence for the access control system. The memory capacity of the M2150 DBU is 50,000 card-holders. The EN-1DBC is designed to be installed close to the door and is supplied in a small polycarbonate enclosure. Optionally it can be installed in a range of steel enclosures.

32 door Net2 system from PaxtonIris scannerBullet proof security boothCCTV integration Gyron are a leading UK provider of data centre services. The dynamic company has expanded from their London Docklands facility to a new site in Hemel Hempstead, where they offer customers the highest standards for colocation and managed hosting.They have a diverse range of clients, from government departments and large IT consultancies to multi-billion dollar global enterprises. It is essential to offer them a high level of security at Gyron's facilities.Ben Miller, Gyron's Operations Director says: "Think of us as technical landlords, some customers are hosting up to a quarter of a million websites each. They really need to be sure of how advanced our technical facilities are."Robin Balen, Gyron's Managing Director says: "In addition to ensuring all the technical aspects of our new centre are first class, we needed to ensure that our security systems are top class as well."An important part of the security offered is the access control system.  Robin says: "Without access control we wouldn't have any customers."Net2 provides the flexibility needed and the audit trail that is essential for Gyron's business. Anyone visiting Gyron has to pass through stringent security. Barriers and rising bollards protect the car park, with the secure data centre guarded by a full height, bullet proof glass ‘man trap'. Users gain access using their token then, once inside, an iris recognition reader checks their credentials and performs an ultrasonic scan to ensure only one person is present, before granting access to the secure area. The iris reader is linked into the Net2 system, giving a full event log of people moving into and out of this area.

Addressing longstanding customer demand for non-proprietary access control solutions, the Synergis Master Controller (SMC) from Genetec is a controller that allows users to modernise their security operations, migrate to an IP-based access control solution, while leveraging their networking infrastructure and existing equipment and wiring. The SMC is a key component of Synergis, Genetec’s IP access control solution, which facilitates real-time monitoring of access events and alarms, as well as cardholder management and reporting. When used within Security Center, Genetec's unified security platform, the SMC becomes a catalyst for organisations to evolve to a unified approach for security management. Genetec customers can seamlessly blend their IP video surveillance, access control, license plate recognition, and intrusion monitoring needs within a single unified platform.  "For some time, we'd been wanting to move to a unified security solution for access control and video, but could not afford to waste the significant infrastructure investment we had already made in our access control installation,” states Dick Hamann, Vice President Information Technology and Resources/Chief Information  Officer, Seminole State College of Florida. “What we really needed was a solution that could leverage and take control of our existing equipment. When Synergis Master Controller was brought to our attention, we decided to set up a pilot site to test it in one of our buildings. The SMC exceeded our expectations; we were impressed with how easy the migration was and how well it performed. The success of this pilot essentially clears the path for us to fully migrate the rest of our facility, while also enabling us to take advantage of Security Center video to build a unified system." To help customers speed up deployment time, reduce costs and ensure that their security investment will be protected for years to come, the SMC features native support for non-proprietary access control hardware from Mercury Security and HID Global.  Supported interface modules include the VertX V100, V200 and V300 from HID, and the MR52, MR50, MR16IN and MR16OUT from Mercury. The SMC supports 32 downstream modules, connecting to up to 64 readers, as well as being able to monitor hundreds of zones and alarm points. Both Mercury and HID modules can be supported on the same SMC. Thanks to advanced security functionalities, SMC users can implement greater levels of security to protect their workforce, visitors, and assets. To ensure the highest level of security, communications between the SMC and Synergis software are authenticated and encrypted. Using the SMC's and Security Center’s threat management capabilities, users can quickly respond to changing security conditions and alter the behaviour of their security system accordingly.  Users now have the power to restrict or override physical entry to a specific area, building, or across an entire organization, or can trigger a full lockdown at a moment's notice. As a true IP device with two on-board Gigabit Ethernet ports, the SMC allows users to efficiently leverage their corporate or security network and reuse much of their existing access control infrastructure such as readers, credentials, compatible interface modules, and wiring to transition into a fully IP-based access control system. “Above and beyond offering additional hardware options to our customers and freedom of choice, the SMC will also make it easier and less costly for users wanting to modernize their legacy access control system and move to a unified security platform," says Jimmy Palatsoukas, Senior Manager of Product Marketing at Genetec. Genetec also offers its customers access to a full line of enclosures and power supplies, as well as several pre-wired enclosures with the SMC, power supply, HID, and Mercury modules. These off-the-shelf and pre-wired kits help reduce wiring and hardware deployment time. To further simplify the installation process, advanced options available with the SMC allow customers to configure their access control software, doors and SMC units prior to actual installation. DHCP support and an advanced controller discovery tool virtually automate the enrolment process. Maintenance activities such as upgrades and troubleshooting are made easy thanks to an intuitive web interface.

Motherboard only Controls and powers all access control devices at the door to minimise installation costs Powerful iSTAR feature set including anti-passback and advanced peer-to-peer clustering Localised access control decision-making with storage for over 400,000 personnel records Dedicated input for fire alarm interlock releases door locks during fire conditions Local LCD and LEDs provide clear startup and troubleshooting information AES 256 network encryption; FIPS 197 listed Compatible with C•CURE 9000 and C•CURE 800/8000

Powerful network-ready door controller for up to 32 readers (16 from ACMs) Dedicated DIP switch allows to go from “Pro mode” for use with C•CURE 800/8000 and C•CURE 9000 to “Ultra mode” for use with C•CURE 9000 Dual GigE network ports for redundant network operation Hardened Linux embedded OS for improved security and scalability Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Includes global anti-passback and advanced peer-to-peer clustering Native intrusion zone functionality Manages up to 500,000 cardholders in local memory Socketed relays improve serviceability Great solution for enterprise and government installations

TDSi 5002-1811 is a MICROgarde I I/O module upgrade kit.

Supports 8 readers, board only Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory

Supports 16 readers, board only Powerful IP-ready door controller Hardened Linux embedded OS for improved security and scalability Onboard 256-bit AES network encryption Enables wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution Native intrusion zone functionality Includes global anti-passback and advanced peer-to-peer clustering Manages up to 500,000 cardholders in local memory

Designed to mount the AC‑2DM-B and AC-2DM-W controllers on the surface of the wall Includes six conduit knockouts to allow external conduit access

Controller with 512K memory and accessory kit (includes 1.0K ohm(2), 5.6K ohms (10), 120 ohms (2), PCB standoff, lock hole cover, ground wire and screwdriver).  Controls two doors and easily links to a network. Automated trouble reporting. UL294, CE and FCC certified.