Security Bollards  (33)

The Model DSC305-PE Bollard System ("DSC305") is designed to provide positive control of automobiles and trucks into and out of restricted areas.  The DSC305 can be a standalone traffic controller for a single lane traffic-way, or it can be arrayed to control multiple lanes of bi-directional traffic.

The new patent-pending TB100 crash-rated portable bollards allows law enforcement and security providers to quickly create high security special event barricades that block access to temporary venues where vehicles can be used as weapons against large numbers of pedestrians. Up to five TB100 portable bollards can be linked together with a cable system and be placed on a road’s surface to create immediate protection for a span of 20 feet (6 m).  These event barricade portable bollard systems requires no other installation procedures, no excavations and no sub-surface preparations. Certified testing demonstrates that a TB100 portable bollard will stop and disable a 15,000 pound (6,804 kg) vehicle traveling at 30 mph (48.3 kph), resulting in an ASTM M30, P3 rating. A single TB100 bollard absorbs 400,000 foot pounds of kinetic energy.

Delta Scientific’s new DSC633 shallow foundation bollard single bollard has been successfully tested to ASTM F2656-20 M30/P1 standards.  Designed for applications where underground utilities and space limitations pose a problem, the DSC633 is the perfect solution. The DSC633 is a single shallow foundation bollard design that stopped and destroyed a 15,000 pound test truck with an amazing -3.63 feet of dynamic penetration and -8.82 feet of static penetration.  The simulated bomb load remained intact and contained on the truck bed.  The test vehicle weighed 15,000 pounds and was traveling  over 30 miles per hour.  The DSC633 bollard has a height of 44 inches and a diameter of 13.75 inches with a cover.  Delta’s bollards can be furnished with an array of decorative covers to enhance the look and match the aesthetic of the surrounding structures.

Delta Scientific’s new DSC720-1M security bollards, created to stop taller trucks such as those found in Europe and the Middle East from tumbling over anti-terrorist crash-proof bollards, stopped a 15,000 pound (66.7 Km) flatbed truck impacting at 50 miles per hour (80 kph) with only a 0.5 meter penetration of the vehicle, creating an M50, P1 ASTM rating. The bollards caused severe damage to the engine and drive train. The DSC720-1M’s controls feature touch screen panels, data logging and Cat 5 cable connections with options of control via a closed network, the Internet, fiber optic or remote operation. Decorative castings and brushed stainless steel sleeves are standard options.

Allows law enforcement and other security providers to promptly block access to temporary venues where vehicles can be used as weapons against large numbers of pedestrians Up to ten TB150 portable crash rated bollards can be linked together with a cable system and be placed on a road’s surface to create immediate protection for a span of 40 feet (12.2 m) Individual security portable bollard provides vehicle barricades in applications such as heavily traveled narrow walkways and roadways or any area that a vehicle can get through The omni-directional design absorbs impact from any angle and its quick deployment enables protection that slows, trips and arrests intruding vehicles without difficulty of a major barricade installation

The TT210 is a bollard 10.75 inches (274 mm) in diameter and 30 inches (762 mm) high. It is used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. Bollards are lowered for passage of authorised vehicles. They operate individually or in groups up to ten. TT210 bollards are typically spaced on four-foot centers.

Delta Scientific’s new DSC635 shallow foundation single bollard has been successfully tested to ASTM F2656-20 M50/P1 standards.  Designed for applications where underground utilities and space limitations pose a problem, the DSC635 is the perfect solution The DSC635 bollard has a height of 44 inches and a diameter of 15.75 inches with a cover.  Delta’s bollards can be furnished with an array of decorative covers to enhance the look and match the aesthetic of the surrounding structures.  These covers include stainless steel, powder coated aluminum, and fiberglass with custom styling and painting also available.  Lights, beacons and audible devices can also be added to the bollards for additional safety protocols.

Delta Scientific TT210M is a bollard hydraulic barricade system used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. Bollards are lowered for passage of authorised vehicles. It is operate individually or in groups up to ten. TT210 bollards are typically spaced on four-foot centers.

Delta’s DSC600 Shallow Foundation Bollards protect approaches to buildings, drop-off and passenger loading areas at transportation hubs, storefronts, sports arenas, office buildings and other presently unprotected locations where vehicle bombers and errant drivers have no obstacles to stop them. With the DSC600 bollard modules, those facilities surrounded by streets, abutting sidewalks and set back on lawns, such as many state capitals, other government structures, stadiums, theaters, and commercial buildings, can now be effectively protected.

The DSC800 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 30 inches and its diameter is 6.63 inches. Applications include lower threat or low speed areas for Federal applications, residential, universities, walkways, cargo depots and rental car agencies. Speed of operation can adjust from 3 to 10 seconds.

Delta Scientific DSC701 M is a crash tested and certified high security manual bollard barricade system. Its height is 35 inches (889mm) and diameter is 12.75 inches (324mm). Its speed of operation can be adjusted from 3 to 10 seconds. Some of its current applications include protecting Federal buildings and cargo depots.

Delta Scientific DSC720FP is a crash tested and certified high security fixed post bollard baricade system. Its height is 35 inches (889mm) and diameter is 12.75 inches (324mm).

The DSC650 module functions as a standalone module or part of an extended array on shallow substrates, including those that are not level or have turns. The new DSC650 bollard modules were tested in accordance with ASTM Designation F 2656-07 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers – August 1, 2007 with a rating of PU50/P1 with a 5,070 pound (2300 kg) truck traveling 50 mph (80 kph). The certified dynamic and final penetrations were less than 1 meter.

Delta Scientific DSC720M is a crash tested and certified high security manual bollard barricade system. Its height is 35 inches (889mm) and diameter is 12.75 inches (324mm).

Delta Scientific DSC800FP is a hydraulic bollard barricade system.

The DSC720 1M  is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

Delta Scientific DSC720 (EM) is a crash tested and certified high security electro mechanical bollard barricade system. Its height is 35 inches (889mm) and diameter is 12.75 inches (324mm). The applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

Delta Scientific DSC720 is a crash tested and certified high security hydraulic bollard barricade system. Its height is 35 inches (889mm) and diameter is 12.75 inches (324mm). Applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

The DSC720 1M is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients. These bollards have seen multiple tests to US Department of State and UK PAS standards. The 1M, one Meter version has a shown to have a zero penetration (-.5M penetration of the truck bed) for high CG vehicles found in the USA and in the EU.

The DSC701 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 35 inches and diameter is between 12.75 inches. Its speed of operation can adjust from 3 to 10 seconds. Applications include Federal buildings and high value cargo depots. These bollards can look utilitarian or elegant as the application requires. The bollard can be used with or without a decorative aluminum casting. The castings can be powder-coated and available in a variety of styles.

With P1 Rating, stops 15,000 pound (66.7 Km) truck at 50 mph (80 kph) with only a 0.5 meter penetration of the vehicle Created to stop taller trucks such as those found in Europe and the Middle East from tumbling over anti-terrorist crash-proof bollards Deployed at U.S. locales, including Federal buildings and Department of Defense installations, as well as at various nations’ embassies and high profile, high-risk facilities Has seen multiple tests to US Department of State and UK PAS standards

A crash test of Delta Scientific's new DSC720-1M bollards, created to stop taller trucks such as those found in Europe and the Mideast from tumbling over anti-terrorist crash-proof bollards, stopped a 15,000 pound (66.7 Km) flatbed truck impacting at 50 miles per hour (80 kph) with a -0.5 meter penetration of the vehicle, creating an M50, P1 ASTM rating. The bollards caused severe damage to the engine and drive train. This is the type of stopping power customers want for ASTM 50 and K12 rated bollards. Importantly, these taller bollards provide the same type of stopping power as their predecessor, the DSC720, which is installed throughout the world. DSC720 bollards are deployed at U.S. locales, including Federal buildings and Department of Defense installations, as well as at various nations’ embassies and high profile, high-risk facilities, such as Buckingham Palace and the Singapore Parliament, throughout the world. The new bollards feature a variety of power options including Delta’s hydraulic power unit (HPU), all-weather pneumatic, electro-mechanical, manual or fixed post. The DSC720-1M’s controls feature touch screen panels, data logging and Cat 5 cable connections with options of control via a closed network, the Internet, fibre optic or remote operation. Decorative castings and brushed stainless steel sleeves are standard options.

Delta Scientific DSC701FP is a fxed post bollard operate individually or in groups of up to ten and are used for intermediate level security applications. It is available to secure the sides of roadways with the same crash rating and appearance.

The DSC720 1M  is Delta's highest crash rated bollard tested with a 15,000 lb vehicle at 50 mph. This bollard will stop and destroy much larger vehicles than those tested at very high velocities. Applications include Federal and DOD facilities, embassies and high profile, high-risk clients.

The DSC701 can be a hydraulic, pneumatic, manual operation or fixed post bollard. Its height is 35 inches and diameter is between 12.75 inches. Its speed of operation can adjust from 3 to 10 seconds. Applications include Federal buildings and high value cargo depots. These bollards can look utilitarian or elegant as the application requires. The bollard can be used with or without a decorative aluminum casting. The castings can be powder-coated and available in a variety of styles.

Virtually unlimited in styles and aesthetics, safety consultants can specify having ornamental steel trim attached directly to the Delta Scientific DSC800 decorative bollard or select cast aluminium, iron or bronze to slip over the crash tube. If damaged, one simply slides off the old sleeve and slips on a new one. The designer bollards are available in stainless steel, cast stone, ceramics and epoxy based stones. They can be fitted with an internal warning light for increased visibility and engineered to suit high traffic volumes. These decorative bollards come in six different series – traditional, silhouette, sculptured, omni, lineas and architect. Protection levels all meet or exceed U.S. Department of Defense and Department of State certifications. They hold the highest ratings ever given to bollard systems. The DSC800 is certified at K4, L2, and able to stop a 6,800 kg vehicle at 50 kph. DSC800 bollards are used to protect important facilities from Windsor Castle to a hundred-plus embassies, the Ronald Reagan Library and major government buildings around the world.

Delta Scientific’s all weather electro-pneumatic systems are aesthetic, durable, flood-resistant and green, featuring low power consumption and able to run at 300 cycles per hour.

Delta Scientific TT203M is a manual bollard used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. It is operated individually or in groups up to ten and are typically spaced on four-foot centers. The manual version features a manual lift and can be locked in the up or down position.

The TT203 is a bollard that is 8.63 inches (219 mm) in diameter and 24 inches (610 mm) high. It is used for intermediate level security applications, including government facilities, corporate headquarters and high value cargo depots. Bollards are lowered for passage of authorised vehicles. They operate individually or in groups up to ten. TT203 bollards are typically spaced on four-foot centers. They are crash rated.

The Model DSC305-PE Bollard System (“DSC305”) is designed to provide positive control of automobiles and trucks into and out of restricted areas. Precision steel bollards raised and lowered by a quiet pneumatic source are used as a primary bulwark against unauthorised or wayward vehicles and can stop aggravated or accidental vehicle attacks.

DSC800 is a crash tested, crash certified, high security bollard barricade system.

DSC701MM is a crash tested, crash certified, high security bollard barricade system.

Jacksons K4 automated crash rated bollard is designed with care and is tested by security experts to ensure it's capabilities and specifications.