Safety & Security Gates  (77)

The MG137 and MG139 Manual Gates are designed for security applications where the frequency of use does not require an automatic barrier, yet a chain or swing gate is impractical or unsightly. The MG137 features a 2-inch square steel arm while the MG139 features a 3.5-inch round arm. The MG137 can be used for drives up to 15 feet and the MG139 can be used for drives up to 22 feet. Both can be installed with minimum equipment. When down and locked, they provide a positive restraint to vehicular traffic.

The MG137 manual gates are designed for security applications where the frequency of use does not require an automatic barrier, yet a chain or swing gate is impractical or unsightly. The MG137 features a 2-inch square steel arm.

Delta Scientific TT281 is a rolling beam gate with K12 / L3 certification level.

The front buttresses on a typical security gate increase the foundation size, affect the appearance of the gate and limit the thickness of the front face materials. For the first time a high security crash rated gate can now fully match the perimeter fence in materials ranging from wood; steel; mesh; glass; fence pickets or railings. Anti-climb, clear or opaque ballistic in fill are all available. This high security gate is guided from the rear side leaving out the front buttresses. This provides the architect and security engineer flexibility on the face treatment or in fill of the gate. The security gate can be supplied as an open frame for field fitting or supplied completely assembled. The crash beam behind the gate stops the vehicle not the face.

The model BB10M Heavy Duty Security Gate powered by an integral hydraulic power unit can protect road widths up to 33feet(10.0M). The BB10M incorporates a high reliability electro-hydraulic pump powered by a 1.5 hp motor, hydraulic pump, pressure control unit, a precision hydraulic actuator driving a crank assembly supported by high grade. The BB10MS model is a variance of the standard gate, with a self contained cable beam, this beam replacing the normal boom. The cable beam is secured in the fully down position between two crash rated posts.

Delta Scientific TT282 is a manual swing gate system with K12 / L3 certification level.

Crash rated linear gate End support buttresses Ground tracks Receiving end interlock bolt system Rack and pinion TT260 electro-mechanical gate operator Associated controls and safety equipment.

Delta Scientific Corporation SC3000S high security cantilever gate is ideal for installations that need rugged performance. The drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

The TT280 Linear Crash Gate will withstand the impact of a 6,803 kg vehicle striking the gate at 80 KPH, suffering no significant damage. The TT280 was created for the highest security applications such as embassies, government facilities and corporate headquarters. The gate can be tailored to match the surrounding decor in a wide variety of architectural treatments. Delta Scientific's sliding security gates are all crash rated. One model, the TT280, pictured here, exceeds every known standard for crash worthiness. Some models operate without contact with the ground across the opening, one is a manually operated swing gate while others operate with rack and pinion drives across V-groove wheel ground tracks while incorporating IR safety beam and safety edges. Swing versions are also available. The clear openings range from 12 to 30 feet (3,657 mm to 9,144 mm). The standard height for all, except the swing gate, is 109 inches (2,769 mm).

Delta Scientific Corporation TT300 S rolling pedestrian gate is ideal for installations that need rugged performance, the drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

Delta Scientific Corporation SGC1000 is designed to fill the need for a rugged manual crash rated swing gate. The design of the end support assemblies add to its crash rated performance. A ground track is not needed.

Delta Scientific Corporation DSC 288 high security sliding gate has a positive latch pin latch that secures the gate in the fully closed position and protects against mobs forcing the gate open. The gate also has programmable logic controller (PLC) with inteli gate control features. It has built in safety edge, IR safety beam and inductive safety loops.

Delta Scientific Corporation TT300 rolling pedestrian gate is ideal for installations that need rugged performance, the drive mechanism is electro-mechanical or hydraulic. Final drive is via rack and pinion with V-groove wheels in sub-grade or at-grade ground tracks.

Uses active infrared technology to combine activation and safety in one sensor Provides both maximum safety around the threshold of an industrial door and an extra-large motion detection area, even at mounting heights of up to 6.5 metres Optimised for industrial doors The 1st row has a door cancellation function that reduces malfunctions caused by door movement Also, the activation and safety outputs can be selected from N.C. and N.O. simply by selecting the dipswitches The automatic infinite presence detection increases safety and prevents unwanted door opening due to a sudden change in floor condition The large detection area provides rapid detection of any traffic, including trucks, approaching from any angle The sensor’s enhanced pattern depth enables it to detect objects farther away and allows the door to open conveniently The presence and motion detection areas can be adjusted independently

Provides safety around the door and through the threshold, at the same time the redundant microwave makes sure that a comfortable opening is guaranteed at all times The large microwave motion detection area provides fast detection for any traffic, approaching from any angle, which allows the door to open conveniently The presence and motion detection areas can be adjusted independently By selecting a dipswitch, the active infrared detection area can be set to safety only or to safety and activation With the enhanced cross traffic cancelation function the sensor prevents unnecessary openings The uni-directional function allows the door to close faster when traffic is moving away from the door

Combines activation and safety functions Safety is assured by the presence detection The sensor detects a person or object and holds the door open as long as they are in the threshold area, even if they stop or pause The presence detection can be set active from 1 row, close to the door, to all 5 rows active for special applications like elevators or high speed doors Snow mode and variable sensitivity adjustments make this sensor suitable for every application, even in extreme weather conditions

An activation and safety sensor based on radar and active infrared (AIR) technology Suitable for industrial and commercial doors, with a maximum mounting height of up to 6 metres The radar technology ensures a timely opening, the active infrared technology prevents a premature closing and together it results in a smooth flow of people and vehicles The sensor creates safety in and around the threshold by detecting moving and stationary persons and objects during the set presence time For safety in and around the threshold, it is equipped with 2 rows of active infrared, each with 8 spots The large radar field guarantees early activation for comfortable throughput. Both are adjustable in depth and width

Provides fast detection for all automatic door installations and particularly for applications with high-speed entries Offers a narrow or wide detection area that makes it suitable for all types of installations The narrow setting is easy to set by just clicking the narrow lens on to the radar module By turning the module left or right and tilting it up and down the microwave can be adjusted quick and simple for many different applications

Provides safety around the door and through the threshold, at the same time the redundant microwave makes sure that a comfortable opening is guaranteed at all times The large microwave motion detection area provides fast detection for any traffic, approaching from any angle, which allows the door to open conveniently The presence and motion detection areas can be adjusted independently By selecting a dipswitch, the active infrared detection area can be set to safety only or to safety and activation With the enhanced cross traffic cancelation function the sensor prevents unnecessary openings The uni-directional function allows the door to close faster when traffic is moving away from the door

Combines activation and safety functions into one sensor based on the Optex full active infrared technology Provides maximum safety around the threshold and at the same time a large motion detection area for door activation The sensor has also a unique “bluezone” lookback function that offers additional safety in the threshold The presence detection area consists of three rows, two rows in front of the door and one additional bluezone row looks into the threshold As soon as the doors start to open the bluezone becomes active and add an additional row of active infrared All three rows will be active when someone or something is within the threshold area as long as the presence timer is set When the area is safe the doors will start to close again The bluezone recognises the door movement and will automatically shut off

Activation safety is assured by the two rows of presence detection closest to the door The sensor detects a person or object and holds the door open as long as they are in the threshold area, even if they stop or pause Snow mode and variable sensitivity adjustments make this sensor suitable for every application and even extreme weather conditions

An active infrared recessed mounted sensor The sensor is designed to be installed in the header of the door operator or as a built in ceiling mount sensor Offers both safety and activation on all types of automatic doors Safety is assured by the two rows of presence detection closest to the door The sensor detects a person or object and holds the door open as long as they are near the threshold area, even if they stop or pause Snow mode and variable sensitivity adjustments make this sensor suitable for every application and even extreme weather conditions

Uses image technology to detect the walking speed and direction of those nearby, ensuring automatic doors open and close at just the right time for each walker Reduces the number of times the doors are opened unnecessarily by keeping the automatic doors closed when pedestrians are merely crossing in front

Provides safety around the door and through the threshold, at the same time the redundant microwave makes sure that a comfortable opening is guaranteed at all times The large microwave motion detection area provides fast detection for any traffic, approaching from any angle, which allows the door to open conveniently The presence and motion detection areas can be adjusted independently By selecting a dipswitch, the active infrared detection area can be set to safety only or to safety and activation With the enhanced cross traffic cancelation function the sensor prevents unnecessary openings The uni-directional function allows the door to close faster when traffic is moving away from the door

A combination sensor for threshold safety and activation Provides maximum safety around the threshold and offers at the same time a large motion detection area for door activation 1 relay for safety and a second relay for motion/activation The sensor detects a person or object and holds the door open as long as they are in or near the threshold area, even if they stop or pause The large detection area provides fast detection for any traffic, including trolleys, approaching from any angle The sensor’s enhanced pattern depth enables it to detect people and objects farther away and allows the door to open conveniently for them The presence and motion detection areas can be adjusted independently

Combines activation and safety functions into one sensor based on the Optex full active infrared technology Provides maximum safety around the threshold and at the same time a large motion detection area for door activation The sensor has also a unique “bluezone” lookback function that offers additional safety in the threshold The presence detection area consists of three rows, two rows in front of the door and one additional bluezone row looks into the threshold As soon as the doors start to open the bluezone becomes active and add an additional row of active infrared All three rows will be active when someone or something is within the threshold area as long as the presence timer is set When the area is safe the doors will start to close again The bluezone recognises the door movement and will automatically shut off Equipped with a "spot" activation area making the sensor applicable as a virtual push button

Can be used as a side screen safety sensor By installing the sensor at the rear end of the door the OA-Presence TN will secure the side screen area and prevent the doors from hitting someone or something during the opening cycle of the door The ideal sensor for threshold safety used in combination with external activators like push buttons, security systems or any kind of activation sensor The active infrared presence detection can be set very accurately and moved 5° towards or away from the door The sensor detects a person or object and holds the door open as long as they are in the threshold area, even if they stop or pause

An active infrared door sensor specially designed for discreet ceiling installation Performs well as activation and safety for any type of automatic door, and its large pattern can easily be adjusted to different door configurations The first two rows of active infrared provide presence detection, which holds the door open as long as a person or object is in the pattern, even if they stop or pause The presence detection timer can be set to infinity Its large detection area can be set very precisely and easy by dipswitches and levers to line up with doors and other sensor patterns, providing maximum safety

A passive infrared door sensor for every type of automatic door application The compact housing makes it also suitable for recessed mounting The detection pattern consists of 10 individual zones, providing high sensitivity even in large areas Rotating the spherical lens easily changes the detection area from standard to large size By using area masking seals, the detection pattern’s size and shape can be further customised to best fit the application Advanced circuitry minimises false activations, making it ideal for environments with sunlight, wind, rain, snow or radio frequency noise

Combines active infrared and microwave technology Provides safety around the door and through the threshold At the same time the microwave makes sure that a comfortable opening is guaranteed at all times The active infrared presence detection offers 2 rows of safety in front of the threshold These can be set very accurately and can be moved 6° towards or away from the door The Bluezone/Lookback functionality offers additional safety as the extra row of presence detection looks directly into the threshold This Bluezone row will be automatically shut off when the complete presence detection area is cleared and the doors start to close The large microwave motion detection area provides fast detection for any traffic, approaching from any angle, which allows the door to open conveniently The presence and motion detection areas can be adjusted independently By selecting a dipswitch, the active infrared detection area can be set to safety only or to safety and activation The uni-directional function, allows the doors to close faster when traffic is moving away from the door, this will contribute to significant energy saving

The sensor is easy to install by simply clicking the master and slave modules into the profile, the master and slave modules are connected by a communication cable with connector The wide detection area of each module secures a high level of safety around the door and will prevent the door leaf from hitting an object or person near the door Adjustments to the sensor are done by the use of dipswitches and a levelling screw

Provides fast detection for all automatic door installations and particularly for applications with high-speed entries Offers a narrow or wide detection area that makes it suitable for all types of installations The narrow setting is easy to set by just clicking the narrow lens on to the radar module By turning the module left or right and tilting it up and down the microwave can be adjusted quick and simple for many different applications The Auto-Caution Mode guarantees more reliability to prevent the door from closing, even if a person is wavering in the detection area The sensor will immediately change from uni directional to multi directional for safety purposes Equipped with a dipswitch for uni directional or bi directional mode

An activation and safety sensor, based on active infrared Suitable for industrial and commercial doors, with a maximum mounting height up to 4.5 metre Ensures a timely opening, prevents an early closing, and stimulates a smooth flow of persons and vehicles The sensor creates safety around the door by detecting moving and stationary persons and objects during the set presence time To ensure comfortable opening and safe detection, it is equipped with five rows of active infrared, each with 12 spots These are adjustable both in-depth and in width

A combination sensor for threshold safety and activation Provides maximum safety around the threshold and offers at the same time a large motion detection area for door activation 1 relay for motion and activation and an Opto coupler (NPN) in/output for safety The sensor detects a person or object and holds the door open as long as they are in or near the threshold area, even if they stop or pause The large detection area provides fast detection for any traffic, including trolleys, approaching from any angle The sensor’s enhanced pattern depth enables it to detect people and objects farther away and allows the door to open conveniently for them The presence and motion detection areas can be adjusted independently

The sensor can serve as an extra safety sensor to protect the threshold against early closing of the door Besides, there is also the possibility to position the sensor to create extra safety against pinch off near the door leaf during the opening movement The sensor detects persons or objects as long as they are in the threshold area, even if they stop or pause As threshold safety, the sensor will order the door to open until the person or object has left the area In case of safety behind the door leaf, the sensor will send a contact to the device, where after the automatic door can be sent, for instance, into a slow mode function Snow mode and variable sensitivity adjustments make this sensor suitable for every application and even extreme weather conditions

Delta Scientific AG812 vehicle access gate is an all-purpose semaphore type parking control gate for use with wood or aluminium gate arms. It is designed and configured to meet a broad range of vehicle control and parking needs. The drive train, the control logic module and the cabinet are built to withstand heavy industrial traffic and parking control requirements. Additionally, it includes an interface with revenue systems, vehicle identification systems, card readers, remote control stations and buried detectors.

Delta Scientific SG1420 is a 10 to 18 foot (3m to 5.5m) double reduction drive gate. The drive train, the control logic module and the cabinet are built to withstand heavy industrial traffic and parking control requirements. Additionally, it includes an interface with revenue systems, vehicle identification systems, card readers, remote control stations and buried detectors. The gate also handles longer arms. It is UL listed.

The Gallagher High Voltage Gate Switch provides a continuous energized connection across a closed gate and prevents receiving a shock when the gate is opened. Designed with safety in mind, the High Voltage Gate Switch: transfers high voltage signal to sliding gates is designed to prevent intruder bypass meets health and safety criteria robust construction is suitable for all swing or sliding gates has a high misalignment tolerance.

AG1626ZC2 is Cotterman's adjustable self closing safety gates that assists facility in meeting OSHA and ANSI requirements for guarding platform railing system openings. They easily install to existing platforms and stair openings.

Ideal for exterior applications, interior too Can be surface mounted NC Stop circuit OPEN - CLOSE - STOP control Can be used with most door and gate operators