Mechanical / Digital Door Locks  (387)

TESA Security series is a padlock that features an exceptional varnished finish and protected steel arc, with automatic opening. it also includes varnished brass body for better protection.

5 active scanning components and up to 20 additional scanning positions check locking authorisation Solid, double-action pins ensure optimum security Patented longitudinal profile Key with optimum bitting angle Integrated check for tampering Optimum wear resistance due to use of special nickel silver keys Technological, managed and legal key protection, thanks to security card and patents.

TESA Stainless series is an arc padlock with chromed brass body and stainless steel parts. It has extraordinarily high corrosion resistance and equal keys or masterkeying available.

FPS provides an excellent and simple level of security amongst mechanical locking systems. Tried and tested technology means FPS is also suitable for small master key systems. It goes without saying that FPS also has a feature unique to EVVA: the optimised cuts and the associated, low wear ensure increased safety and a long service life.

TESA TLPS Series is a mechanical digital lock that features Carbonitrided steel antilever hooks in auxiliary cases, depending on each model. It also includes optional key-storing embellishment for the escutcheon.

TESA E240 is a security escutcheons that offers design and security. It features 2 tempered plates protects the cylinder from direct attacks using drill, offering the same security level that the cylinder escutcheons used in Tesa security doors.

TESA Brass series is a brass padlock with a standard or replaceable cylinder (equal keys/masterkeying) and stainless steel parts. It features tempered steel, stainless steel, and equal keys.

Operation: Reversible latchbolt withdraws from either side whit lever or knob.

TESA 2210X series is a single point lock for narrow stile that features two anodised aluminium roses, reversible nickel plated latch, and galvanised steel lock case.

Same dimensions than 2010P/ 2014/ 2015. Optional: 20 mm. narrow forend.Operation: Reversible latchbolt withdraws from either side whit lever or knob.

The T10p is a reversible safety cylinder key points and 11 pins in two rows . This cylinder incorporates anti - drill, anti - bump, anti- pick protection . It is marketed with alpaca pitonaje which provides superior durability 100,000 cycles . The T10p cylinder is characterised by a mid-range solution suitable for public access and housing.

E750 security escutcheon is prepared to avoid different intrusion methods. The holder has been designed with a special geometry developed to hamper clamps, extractors and spanners. It also includes a polyamide based component behind the holder to protect screws and to absorb impacts, to protect in that way the cylinder.

The core of the E700 security escutcheon is formed by 4 stamped steel plates (2 mm. each plate). With the objective of protecting the cylinder, it includes a plug covering lid in hardened steel and a tempered steel plate for lock mechanism protection. 6 hardened steel screws for escutcheon fixing and laminated steel back fixing plate (4 mm. width) assure the well fixing of the escutcheon.

TESA CVISCCMIS is a glass door lock with a pair of club handles.

eCLIQ Furniture Lock - Latch Available as rotary secured or electronical version (V=) Brass cylinder housing components Polyamide or metal housing With 7 mm square spindle Fixing with Parker screw Maintenance-­free for up to 200,000 cycles

eCLIQ Lock for T-handle Available as rotary secured or electronical version (V=) Brass cylinder housing components Polyamide or metal housing With 7 mm square spindle Fixing with Parker screw Maintenance-­free for up to 200,000 cycles

eCLIQ Furniture Lock - Deadbolt Available as rotary secured or electronical version (V=) Brass cylinder housing components Polyamide or metal housing With 7 mm square spindle Fixing with Parker screw Maintenance-­free for up to 200,000 cycles

SALTO XS4 NORDIC Scandinavian mortise lock ensure the door is locked correctly and securely. It is developed to increase both the security and safety of the entire door, especially when used with access control and bulding key-management systems. It is suitable for use with scandinavian SALTO XS4 and SALTO GEO models on both interior and exterior doors.

Mortice lock suitable for narrow profile doors. Axes distances 92mm. Turning angle 30º.

Specially designed for those doors that need an ANSI mortise lock ANSI A 156.13 Grade 1 and a privacy function with a deadbolt, for hospitality purposes. Choice of finishes.

Specially designed for those doors that need an ANSI mortice lock ANSI A 156.13 Grade 1 this lock is a balance between ease of use, security and warranty.

TDSi complete range of electromagnetic door locking products is suitable for a multitude of applications. With holding forces up to 1200lb, the locks deliver cost-effective, high security performance.

The 3KS 3-curve system stands out due to its unique, patented, springless operating principle. Unlike conventional locking systems, in the 3KS cylinder the locking elements move along the curves on the key and are not driven against a spring force. The technology in detail: 12 solid, springless locking pins are brought into specific positions via positive control of the 6 key curves and are scanned via 2 control bars. A locking bar in the plug controls the key's cross-section profile.

The EVVA ICS (Inner Code System) reversible key system provides effective protection thanks to the unique combination of three different blocking technologies: the specially shaped, hard-wearing length profile, the time-tested curve system, which scans locking authorisation, and the improved pin system. This consists of concealed, inner recesses on the ICS key body - a unique feature not found.

The EVVA 3KSplus 3-curve system stands out due to its unique, patented, springless operating principle. Unlike conventional locking systems, in the 3KSplus cylinder the locking elements move along the curves on the key and are not driven against a spring force.

EVVA EPS (Extended Profile System) is a further development of EVVA's successful pin systems. EPS excels due to its patented, multiple-overlap key profile. Authorisation is checked on several security levels.

XS4 is the new access control platform from SALTO enabling users to control and manage a greater range of applications than ever before. Smart, secure and innovative, XS4 Comfort Electronic handle sets need no hard wiring and provide a totally wire free networked electronic locking solution with a great range of features.

Use with Net2 PaxLock and PaxLock Pro wireless door handles Suitable for unsprung lever furniture up to a maximum weight of 0.75kg Easily reversible stainless steel latch bolt

Offers mechanical keyless access suitable for a variety of lockers and cabinet applications Locked and unlocked indicators 4 wheel code combination Up to 10,000 unique combinations Anti-vandal handle Salt spray tested High/Low temperature tested High/Low humidity tested Private and Public function Code retrieval function Flush or surface mounted Suitable for internal and external applications

Alpro 5245102 is a deadlatch to suit round mortice cylinder designed for narrow stile aluminium doors. It is perfect for locations with a high personnel turnover rate such as data processing centres, employee entrances, R&D labs, apartments, dormitories and restricted areas in hospitals and airports.

Alpro 5245702 is an europrofile cylinder deadlatch with 25mm backset that offer flexible control of situations and can be used in conjunction with electric strikes to provide the added option of remote access control.

Large full size lever handles with return to door Ball shape knob available Code Free access option Suitable for internal and external use Tumbler alignment for easy code change Large three coil lever return spring suitable for high traffic use Available in stainless steel or polished brass finish Neoprene seals included

Full size lever handles with return to door Suitable for internal and external use Tumbler alignment for easy code change Available in stainless steel Neoprene seals included

Mortice deadlatch, Exterior door type, Non handed, Outward door open type, Chrome, Mechanical Locks

Large full size lever handles with return to door Ball shape knob available Code Free access option Suitable for internal and external use Tumbler alignment for easy code change Large three coil lever return spring suitable for high traffic use Available in stainless steel or polished brass finish Neoprene seals included

suitable for doors 30mm up to 55mm thick. Protected clutch mechanism, free exit at all times, suitable for rebated doors.

Deadlatch to suit 17mm Europrofile cylinder 38 mm backset Industry standard ANSI cut outs Latch hold back facility Latches compatible for use with electric strikesck

Suitable for doors 30mm up to 55mm thick. Protected clutch mechanism, free exit at all times, suitable for rebated doors.

Alpro ALP603/HM/SE is a touch bar three point latch which combines sleek architectural styling with superb performance characteristics.

Mortice deadlatch, 28.5 mm backset