Access control systems & kits  (537)

Internal, die cast, vandal resistant, with LED & Buzzer, black

External, c/w Stainless steel polished cover with LED & Buzzer

Internal, c/w LED & sounder. For indoor use. 300,000 swipes life.

External, die cast, vandal resistant, with LED & Buzzer, black.

Fingerprint template stored on 2090/2091 units (requires a swipe or proximity reader)

Fingerprint template stored on 2090/2091 units (requires a swipe or proximity reader) used in conjunction with 2090 when 2 or more doors require finger print readers

TDSi Microcard1, eXprox, eXentry1, magnetic swipe and those with industry standard clock & data or Wiegand output formats.

The RM Series Card Reader adopts three technologies: proximity, Wiegand and magnetic stripe. The universal design lets you mix and match different technologies on the same system, while simultaneously maintain a consistent appearance. The three LED colours, red, amber and green indicate a range of conditions: valid or invalid card reads, door forced or held open and system or configuration errors. An audible alert can also be set through the system host to signal these conditions.

The Gallagher PoE + kit enables sites to power the Controller 6000 and in turn their doors access needs directly from a from a buildings Ethernet network.Gallagher Controller 6000 (and single cabinet); Gallagher GBUS Universal Reader Interface (either Cardax IV or Wiegand) and PoE + Splitter PoE+ Kit Options C205900 - Gallagher Controller 6000 PoE + Kit – Cardax IV readers. C205901 – Gallagher Controller 6000 PoE + Kit – Wiegand readers. *Requires PoE IT network infrastructure.

Dual Reader Interface (DRI) module for business access control solutions. Most access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communications are supported. Lock, unlock, and facility code offline access modes are supported on all readers connected to the DRI. Each DRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

Pointprox low profile surface 2m screened cable. May be connected to any of the Progeny access controllers.

Anviz Global EP300 EP300 offers a perfect time attendance solution with special design fingerprint positoning design that makes it extremely friendly for both system administrators and everyday users. With inbuilt rechargeable battery, EP300 is ideal for portable or backup use or in the event there is no AC power available.

100 guest cards, door monitoring, keyboard used to set unset alarms.

SM2000 is part of Anviz’ new generation of fingerprint module for time attendance, access control, lock and safe devices. SM2000 utilises an optical fingerprint sensor, which consists of high-performance DSP, high-capacity flash and colour CMOS chip. SM2000 includes all intelligent modules for fingerprint image processing, template generation, template matching, fingerprint searching, template storage etc.

requires 2131 flush box or 2132 surface. Also available as panel mount. Can be connected to any Progeny access controllers.

PROX-IN-A-BOX™ is easy to install, program and operate.  No PC is required to install or operate the system's standard four-door controller.  The two proximity readers and 25 ultra-thin, durable proximity ISO cards included in the starter kit help you create the kind of access control solution you want.  Installing PROX-IN-A-BOX™ is as easy as installing an alarm system.  Expandable up to 4 controllers for 16 doors with 4 inputs per door, Proximity readers and cards included, 3,000 keys and 1,000 events capacity.  Convenient starter kit: PIAB-1 CONTROL UNIT

The on-board number of inputs and outputs can be expanded with input/output expansion option i.e. 8-input expansion option. It supports 8 inputs per board. 8-input expansion option provides 8 additional inputs for the Gallagher Controller 3000.

The on-board number of inputs and outputs can be expanded with input/output expansion option i.e. I/O expansion option. It supports 8 inputs and 4 outputs per board. I/O expansion option provides 8 additional inputs and 4 additional outputs for the Gallagher Controller 3000.

Provides time attendance report, door control & status. Has manager registration and deletion of registered user data and card, fingerprint data.

PCA IPU 1 way, 16 doors network interfaces. To control 2063 units, not PC dependent (can stand alone), connection via 9 way 'D' type connectors (supplied). Charger PSU: 12 VDC.

Reads any standard bank card. With built-in programming keyboard.

Suitable for internal or external use. May be connected to any Progeny access controllers.

PCA IPU 4 way, network interfaces. To control 2063 units, not PC dependent (can stand alone), connection via 9 way 'D' type connectors (supplied). 64 doors. RS232 and RS422 interfaces.

External, telephone style, backlit keyboard

Single Reader Interface (SRI) module for business access control solutions. Access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communications are supported. Lock, unlock, and facility code offline access modes are supported on all readers connected to the SRI. Each SRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.

Anviz Global D100 is a basic time and attendance system designed for small and medium companies. It doesn’t require any installation.

Anviz Global D200 is a basic time and attendance system for small and medium companies. With inbuilt rechargeable battery, D200 is ideal for portable or backup use or in the event there is no AC power available. Some of its other features include fast fingerprint scan in less than 0.5 second, BioNANO core algorithm of high speed and stability and mini USB slave.

Provides a complete interface between 4 readers and a controller. The unit interfaces to the AAM-16/20/80, AAN-32/100 controllers and AP-550 master card reader using Apollo 2-wire or 4-wire RS485 connection.

With Idesco's redesigned wireless EPC reader you can create secure, cost-effective and user-friendly identification applications for vehicle identification (AVI), logistics systems, access control and even limited inventory control.  The Idesco® EPC Reader is a passive long-distance UHF RFID reader, compliant with European UHF (ultra-high frequency) standards. In its basic configuration, Idesco's EPC Reader employs an internal, circularly-polarized antenna for interrogating tags presented at any angle. However, this reader may also be configured with either an external antenna or both the internal and external antenna. When the EPC Reader is configured with two antennas, both may transmit and receive data/information simultaneously - or one antenna may be programmed to transmit while the other receives. True to form, Idesco's EPC reader is configurable to a variety of communication interfaces (e.g. Wiegand, RS232-485, Ethernet-IP67, 6LowPan, etc.) and with an enviable array of security options for easier integration into your existing system. The EPC Reader provides four I/O ports for addressing peripherals and is engineered to allow reliable deployment both indoors and outdoors. Additionally, Idesco® EPC tags can be customized with both EPC and MIFARE® enabling a single card to provide both vehicle and personal identification. Easy to install, the EPC Reader initiates polling automatically (by default) upon being powered up; it does not require polling commands to be entered first. However, it is also configurable to await an activating command from an external system. Some ideal deployments for the Idesco® EPC Reader include - but are not limited to - automatic vehicle identification (e.g. parking access control, toll tracking, entry gates, harbour moorings), logistics centers (pallet and case tracking), long distance access control (sequestered reader) and certain inventory control applications.

The Gallagher 125 Series readers are multimode readers supporting the widely available 125kHz proximity cards and transponders.  This enables Gallagher Prox 125 readers to read both Gallagher proprietary formats, as well as a variety of Wiegand formats as provided by other reader manufacturers such as Motorola, HID, Casi-Rusco and EM ASK.  It supports Amplitude Shift Key modulation and when connected to FT System, it supports Phase Shift Keying and Frequency Shift Keying.  Dual colour LED and speaker provide comprehensive visual and audible feedback to the user.

Can also control 1 door. Can be PC controlled with Windows software. The APN-30 supports standard proximity and other readers with Wiegand interface. It can be programmed entirely from the keypad of the Apollo AP-410 or AP-502 or via ASW-30 software. Provides complete time zone control of access with its battery-backed real time clock, and provides a printer output for event logging and configuration, via its RS-232 serial interface. The last 128 events are internally buffered for printout on request.

For AAM/AAN controllers and the AP-550 master reader. Different models: API-10 for reader with Wiegand interface; API-11 for 5 VDC Wiegand; API-12 for magnetic insert card reader; API-13 for mag-swipe, barcode or Bewator-Cotag reader, API-14 for standalone keypad interface API-KPD; API-15 for HID prox reader with keypad; API-16 for Motorola/Indala prox reader with keypad; API-17 for elevator control and API-18 for elevator control with keypad interface.

Gallagher uses Philips Semiconductors contactless Mifare standard technology to provide the platform for its Smartcard range.  Multiple applications and operating independence on one card are the benefits of this technology.  The Prox Plus reader is card and PIN unit, used where more security than card only is required. The illuminated PIIN pad allows the cardholder to enter a PIIN in conjunction with a card.  An LCD panel provides user feedback icons making the system easy to use internationally.

Access Compact modules offer the highest security level on the market for OEM manufacturers. Well documented features of Access Compact modules enable the OEM manufacturers a short time to market with the support for popular MIFARE® DESFire and MIFARE® Classic RFID technologies. Idesco's MIFARE® DESFire products are an excellent choice for modern multi-applications with high requirements for both security and configurability.

boxed, built-in charger, room for 2 x 12V batteries

The Gallagher security system uses contactless Mifare Standard technology to provide the platform for its smart card access control reader range. The benefits of smart card technology include the ability to have multiple applications residing and operating independently on a single card with high-level encryption between card and reader.

CEM DIU 220 (Power over Ethernet Door Interface Unit)The DIU 220 (Power over Ethernet Door Interface Unit) completes the CEM IP security solution.  As one of the key players in the market, CEM Systems has taken advantage of PoE Plus technology to be the first to offer 1.6 Amps to reliably power a complete door set (consisting of a controller, two 650mA Maglocks, door holder, sounder and strobe) via Ethernet.  Incorporating a high power PoE splitter module, the DIU 220 door interface unit reliably delivers sufficient power and Ethernet communication to power a complete door set using one CAT5/6 Ethernet cable.  DIU 220 has successfully passed Phase 2 of the IIPSEC, innovation in security IP awards...Benefits at a glance:Complete IP Solution - Using CEM's range of intelligent IP card readers the DIU 220 completes the CEM IP solution.  Clients simply allocate an IP address for the Ethernet card reader at the door and connect directly to the central communications room using the DIU 220 (Door Interface Unit) - taking advantage of connectivity via Power over Ethernet.  With an internal database for offline card validation, the IP readers also ensure the highest possible level of security as they uniquely continue to operate at all times.  CEM offers a range of proven IP readers including the CEM EtherProx card reader and industry's most advanced S600e range of intelligent card readers. PoE Plus Power over Ethernet Access ControlLow cost solution Eliminates the need for mains power at the doorComplete IP Solution at a low cost - Reliably powers a complete door set via one Cat5/6 cable.Low voltage installation - Can be installed by IT network/security installers without an electrician.Visit CEM at IIPSEC, UK, 29th - 31st January, Stand 017Don't miss:  IIPSEC Seminars delivered by Dr George Redpath, CEM Technical DirectorEvolution of IP Access Control in Aviation - IP Solutions in Transportation, Tue 20th JanIntegrating IP based Access Control - Networked Integrated Solutions, Wed 30th Jan To meet with CEM email [email protected] Tel: +44(0)28 9045 6767www.cemsys.com

The Apollo long range infrared transmitter and receiver provide Wiegand interface to the Apollo access control system or can operate as a self-contained stand-alone system. Standard read ranges are up to 25 feet (8 meters) outdoors and up to 80 feet (25 meters) indoors. These ranges can be doubled with use of the extended read range receiver.

Door interface Electronics held on one board. 1 double pole relay output and 1 optional auxilary relay. Backup battery for emergency power. Fire alarm and break glass inputs for emergency door release. Provides interface between door hardware and card reader.

Picture Perfect offers advanced access control and alarm monitoring capabilities for global organisations providing a single point of management for both local and global locations. Picture Perfect is built on either the IBM RS/6000 series running the AIX operating system or Intel Architecture servers running Red Hat Linux. Picture Perfect features a modular architecture enabling unlimited expandability. A standard Web browser can be used to access the system. The Card Access Report Management Application administrative tool is designed to allow department managers to generate their own reports.