Access control systems & kits  (537)

Biometric systems are often required for sensible areas, where security of persons or goods is important. A Starter Kit is available which contains a reader, the software and the accessories to install, configure and use you first door. The fingertip reader, which is intended for Access Control applications, can be used either in identification mode (the user is identified by fingerprint data only) or in verification mode (a PIN-code is entered as reference for the stored template to be compared with the actual fingerprint). The software BIO FTM is used to manage the biometric information of the fingertips. A comfortable user menu will guide you to the enrolment of each finger pattern. These pat-terns will be then downloaded to each reader.

The ADD5110 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents the access card at an entry or exit reader the ADD5110 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

The AR6181-MT and AR6182-MT (keypad version) proximity readers in square housing are part of the new Access reader range. The readers are designed for access control applications using standard ISO14443A, Mi-fare and my-d proximity cards, to read the unique card number or the personalised ID number within sector/block of Mifare cards. Readers can be connected to the door controller or the Reader Interface Module RIM to allow the operation with the access control systems CerPass, SiPass or SIPORT.

The AR6331-LE and AR6332-LE proximity readers in Mullion housing are part of the new Access reader range. The readers are designed for Access Control applications using Legic proximity cards (13,56 MHz technology), to read the unique card number or the personalized data of segmented cards. The reader can be connected to the door controller or the Reader Interface Module RIM to allow the operation with the access control systems SiPass, CerPass or SIPORT.

The AR6331-RO and AR6332-RO proximity readers in Mullion housing are part of the new Access reader range. The readers are designed for Access Control applications using Miro proximity cards (125 kHz technology), to read the unique card number. The reader can be connected to the door controller or the Reader Interface Module RIM to allow the operation with the access control systems SiPass, CerPass or SIPORT.

The Output Point Module AFO5100 is an advanced, multi-purpose device that provides an interface between field level input and output devices and an Advanced Central Controller (ACC). It is designed for use in elevator systems integrated within an access control and security environment. Access control at up to 16 Floors can be facilitated via a single AFO5100, and multiple AFO5100 units can be combined per elevator car. The Fire Over-ride mechanism allows floors to be made accessible automatically during an emergency situation, a critical feature for sites where legislation requires strict emergency responses.

The ADD5160 provides an interface between a card reader and the advanced central controller (AC5102 or AC5200) for up to two card readers. When a cardholder presents an access card at an entry or exit reader the ADD5160 reader interface interprets the encoded information and sends this data to the controller. The controller then checks the validity of the cardholder‚ and if the appropriate permissions have been assigned‚ the controller sends a message back to the reader interface allowing it to unlock the door and provide passage. It can also report the status of the door (locked or unlocked) at any time.

The card reader types AR6643-RX/-MT are part of the Prestige series in the new Access reader design. The readers are capable of stand-alone operation and dispose of an own RAM-memory for storage of badge data and access events. They are equipped with integrated door control functionality. A 2x20 digit Vacuum-Fluorescent-Display allows to display date and time, booking reason as well as user specific information (such as time balances, text messages etc.). In addition the reader is equipped with 9 function keys and a keypad for PIN-code entry. The Prestige readers are available equipped with reading modules for contact less standard technologies in 125 kHz (Miro, CerPass Proximity, Hitag 1 and Hitag 2) and 13.56 MHz frequency (ISO14443A - Mifare® and my-id proximity).

The card readers types AR6641-RX/-MT are specially designed for access control applications in combination with the access control system SIPORT NT / SIPORT NT light. The readers are capable of stand-alone operation and dispose of an own RAM-memory for storage of badge data and access events. They are equipped with integrated door control functionality. Connection to the SIPORT system can either be via an RS485-interface or via an LAN-adapter, which can be integrated into the reader. The Prestige readers are available equipped with reading modules for contact less standard technologies in 125 kHz (Miro, CerPass Proximity, Hitag 1 and Hitag 2) and 13.56 MHz frequency (ISO14443A - Mifare® and my-id proximity).

The AFI5100 is a programmable input controller used as part of a Vanderbilt integrated access control and security system. It provides a local interface between an Advanced Central Controller ACC and the devices used to monitor a facility; for example, duress alarms or infrared detectors. When an input device that is connected to an AFI5100 changes state, the AFI5100 registers the change of state and forwards this data to the ACC. After checking the validity of the data, the ACC sends the message to the Host system so the Alarm Handling mechanism can respond appropriately.

The card reader types AR6473-RX/-MT/-LE are part of the Prestige series in the awarded Access reader design. The readers are designed for access control application using CerPass reader protocol. A 2x20 digit Vacuum-Fluorescent-Display allows displaying 10-user specific information such as “Not valid” or “Enter PIN”. In addition the reader is equipped with a keypad for PIN-code entry. The Prestige readers are available equipped with reading modules for contact less standard technologies in 125 kHz (Miro, CerPass Proximity, Hitag 1 and Hitag 2), 13.56 MHz frequency (ISO14443A - Mifare, my-d proximity) and 13.56 MHz frequency (Legic).

12, 1, PSU

12, 4, PSU

ADD5190 dual reader controller (DRI) secures doors or barriers by supporting one entry reader, one exit reader, a door strike to lock and unlock the door, and a door contact to detect the door's position (open or closed). The DRI has been carefully engineered so that it can be easily mounted in a variety of environments. Most commonly a DRI is either installed near the door which it controls, or centrally in the same cabinet as the advanced central controller.

The connection of Granta controllers conventionally uses RS485 networks, or for remote site connection, dial-up or leased line modems. The Granta 4237 TCP/IP module provides connectivity over shared networks and the Internet. Granta for Windows Version 4.2 provides full support for the 4237 as standard. Using standard RS232 connections the 4237 can connect directly to 4101 or 4010 controllers in individual or Master/Slave configurations. The configuration of the 4237 can be done from any standard web browser through the internal HTTP server, or configured via a Telnet connection if preferred. Flash RAM allows fast free upgrades of firmware in the field. This is a built-in unit which will fit in the 4010 and 4101 housing and does not require a module slot in the Granta controller.

"Slim" access control modules with field programmability. Compatible with INDALA FlexPass Imageable cards. Available in blue colour.

The ANC1616-B network server is a multi functional device that can be set to several modes. In the “CerPass” mode, the ANC1616-B facilitates communication between the AMS PC and door controllers through a TCP/IP Ethernet network. In the “Biometrics” mode, the ANC1616-B enables the connection of the Fingertip reader AR6332-BI to a TCP/IP Ethernet network. In the “Device Server” mode, the ANC1616-B connects the serial devices to a TCP/IP Ethernet Network. The ANC1616-B can be configured either locally (by using an emulation terminal on the serial connection PC to ANC1616-B) or remotely (by using a Telnet client). This configuration is stored in the EEProm of the ANC1616-B device and is retained even without electricity supply.

The AFO5200 is an advanced, multi-purpose module that provides an interface between field level input devices (such as PIR's) and output devices (such as locking devices) to the advanced central controller AC5100.

HID Global, a worldwide leader in secure identity solutions, today announced its new ActivID Appliance solution for strong authentication. Enabling organisations to protect corporate data against unauthorised access, ActivID Appliance is an essential component to ensure enterprise data security across numerous industries including banking, government and healthcare. Targeted at medium to large organisations, the versatile appliance is interoperable with the widest range of authentication methods to ensure an organisation’s employees, consultants, partners, and customers have secure and appropriate access to corporate data and online applications.   ActivID Appliance, formerly 4TRESS Authentication Appliance, is a full SAML v2 compliant identity provider, available as both a hardware appliance and a virtual appliance. Providing comprehensive multi-layered and versatile strong authentication, including ActivID Threat Detection Service, it gives enterprises the ability to secure a mobile workforce, enabling the use of personal and corporate mobile phones for two factor authentication. “HID Global works closely with customers in every industry, from banking and government to healthcare and the enterprise, and their feedback is consistent across the board – they need a reliable and secure way to validate user identity that does not add unnecessary complexity to their existing environments,” said Yves Massard, director of product line management, Identity Assurance with HID Global. “We developed the ActivID Appliance based on this input to improve the ease of deployment and management, while ensuring the highest level of security for end-users accessing data over the public Internet using all types of devices.” New ActivID Appliance Features: Simpler and improved high-availability with automatic recovery after network failure Customisable and customisable self-service portal allows users to establish and maintain their own credentials or tokens without IT admin support Control over which soft token platform is used in a particular environment (e.g. a user can decide to enable iOS, Windows and Blackberry but disable           usage from Android and J2ME phones) Version control for any and all soft tokens, providing customers with additional options for risk mitigation Multiple security domains, allowing segregated management of different groups (e.g. employees and customers) SNMP v3 monitoring Premium hardware support option with advance replacement and on-site warranty replacement Availability HID Global’s ActivID Appliance is available immediately through channel partners. Click here for more information: http://www.hidglobal.com/products/software/identity-assurance/activid-appliance

"Wallswitch" access control modules with field programmability. Compatible with INDALA FlexPass Imageable cards. Also available in blue colour.

ProxSmith Application Programming Interface is a software programme for creating applications for the FlexPass access control products.

This range of Proximity readers are ideal for virtually all access control applications. The single piece construction proximity readers provide maximum read ranges of 100mm, 120mm and 300mm. Available in a range of colour and housing styles, the electronics are sealed in UL approved epoxy potting material, making them vandal and weather resistant. These readers can output data in Wiegand, magnetic stripe or serial data formats.

"Mid-Range" access control modules with field programmability. Compatible with INDALA FlexPass Imageable cards. For single or double gang box mounting. Also available in blue colour.

HID Global’s ActivID Responder Appliance is a cost effective solution for scaling a PKI Certificate validation service centered around the ActivID Validation Authority. Each Responder Appliance provides a local OSCP service providing real time validation without the overhead of connecting to the centralized service. Organizations deploying the ActivID Responder Appliance benefit from increased security and trust by validating certificates at time of usage, without negatively impacting end user experience.

HID Global’s ActivID® CMS Appliance enables organisations to issue a strong authentication credential that goes beyond perimeter security. A smart card or smart token can be used to secure access to individual workstations and servers within the firewall, as well as securing VPN and other remote access use cases.

MORPHOSMART™ is a multipurpose fingerprint processing peripheral. Based on a high end optical sensor, the MORPHOSMART™ is a biometric peripheral for a wide range of applications: people registration, (ID cards, immigration, voting system, access control,…), ID verification (add-in device for any kind of transaction terminals - PC, POS, ATM, etc -, welfare, logical or network access control, e-commerce), people identification. Two different models are available: an optical reader (MORPHOSMART™ 100) and a version performing processing, authentication and identification functions (MORPHOSMART™ 200). Both are also available in OEM versions.

The 4210-2 RF module provides "receive and transmit" signals for proximity and hands-free reading heads. 4101 controllers must be fitted with a 4210-2 RF module when any xx100 reading heads or 270 loop couplers are connected

Hanwha Techwin intelligent four door access control panel C/W PS's (Mifare format).

Hanwha Techwin four door TCP/IP access control panel C/W PSU's (Mifare format).

Compatible with Wiegand, Barium Ferrite, Proximity, Bar Code, Magnetic Stripe, and Biometric readers. The WinDSX Communication Server communicates with the DSX-1020 via TCP/IP LAN communication, Direct Serial Port connect, and Dial-up Phone Modem.

The new iCLASS SE Encoder, a desktop solution and developer toolkit (DTK) from HID Global enables organisations to encode and instantly issue cards using a single device. The multi-technology encoder makes it easier for customers to migrate from current technologies to the higher security, adaptability and portability of the company’s iCLASS SE access control platform. The solution gives organisations the convenience of encoding a broad range of current and future technologies, with the option for customers to create and manage keys and configure readers locally or through HID Global’s iCLASS and SE Elite programme. “Migrating current systems to operate with our iCLASS SE platform has never been easier with the new iCLASS Encoder that empowers customers to encode and format an extensive range of credential technologies, on demand, through an easy and straightforward process,” said Helmut Dansachmueller, vice president of product marketing, credentials and embedded technologies with HID Global. “HID Global’s goal with the encoder is to give users the technology flexibility and confidence in their access control systems investments as they move to high frequency and future technologies.”   The iCLASS SE Encoder provides an entirely open solution and that allows organisations to encode multiple credential technologies, including both genuine HID and third-party credentials, in order to upgrade existing card populations for use with iCLASS SE platform readers. For maximum interoperability, the solution supports Seos, iCLASS SE, standard iCLASS, MIFARE Classic and MIFARE DESFire EV1. The encoder also supports 125 MHz HID Prox for encoding Prox credentials as well as migrating from HID Prox to high frequency technologies. Users can seamlessly and easily migrate from one technology to another by simply extracting access control data from an existing card and writing it to the new credential, without having to manually input data or understand encoding details. For even higher security, users can “wrap” their access control data within a Secure Identity Object (SIO) and then write it back to the same card.  Based on open architecture, the encoder enables SIOs to be added to the full range of supported cards, including MIFARE and DESFire credentials. The HID Global Developer Tool Kit (DTK) for the iCLASS SE Encoder Platform is designed for systems integrators, OEM’s and solution providers who wish to integrate contactless encoding capabilities into their products and leverage the advantages of the iCLASS SE ecosystem. Key features: Programme standard security or Elite credentials Securely manage credential keys Multiple format support Programme Genuine HID or third-party credentials by downloading appropriate Encoder Credits Developer Tool Kit (DTK) provides all the necessary tools, documentation and developer resources to allow integration of the iCLASS SE Encoder into third party applications. HID Global is also introducing a flexible credential encoding applet structure that is based on an easy-to-manage credit system. Users install only the applets they require for the technology credentials they currently need, and can add applets to support other existing or future technology credentials over time. In addition, the iCLASS SE Encoder is field-programmable and upgradeable for added versatility.   The encoder is part of HID Global’s award-winning iCLASS SE platform, which empowers users to implement a combination of credential technology, traditional smart cards and smartphones that meet the specific needs of their access control system. HID Global also plans to offer credential encoding capabilities via its FARGO printer line and its HID Secure Identity Services portal. For more information visit: https://www.hidglobal.com/developer-center/iclass-se-encoder-platform

The DGI replaces the existing door guard module, providing an enhanced functionality.  The DGI is used to allow authorised access control through doors which are continuously protected without causing an alarm condition.  Any unauthorised access results in an immediate audible warning from the DGI.  The DGI is easy to install and can be used either as a stand alone unit, or integrated with the Galaxy system providing door status information, alarm indication and a log of DGI activity at the panel. 

Compatible with Wiegand, Barium Ferrite, Proximity, Bar Code, Magnetic Stripe, and Biometric readers. The WinDSX Communication Server communicates with the DSX-1022 via TCP/IP LAN communication, Direct Serial Port connect, and Dial-up Phone Modem.

Compatible with Wiegand, Barium Ferrite, Proximity, Bar Code, Magnetic Stripe, and Biometric readers. The WinDSX Communication Server communicates with the DSX-1048 via TCP/IP LAN communication, Direct Serial Port connect, and Dial-up Phone Modem.

DVTel’s Longitude™ Network Appliance (LNA) is the next generation of Networked (IP) based Master Control Panel for IP Access Control (IPAC) systems.  The LNA is a complete system in a “box” that provides access control, alarm monitoring, and PLC functions in a single compact platform.  It provides fully unified access control and alarm monitoring interfaces using HID Cards, Readers, VertX Controllers, and I/O Modules and/or Mercury Controllers and I/O Modules. In addition, it supports Biometric Access Control using HID, Recognition System, and BioScrypt Biometric Readers. Furthermore, it simultaneously supports controllers and I/O Modules from other major manufacturers.

Momentary or latch change-over relay option. Battery back up facility. Arm and alarm inputs. 4 status LEDs to indicate power supply, fuse and fault diagnostics. Supplied with 1 x MX-PROX, 1 x MX-PCARD and 1 x MX-PTAG. 12Vdc Power Input. 12-24Vac Power input. 12v, 500mA Auxilliary output. 1 Year manufacturers warranty

MORPHOMODULE™ is a biometric module which can be incorporated into many different products requiring logical or physical access control (locks, safes, computers, decoders, etc). It includes a fingerprint sensor, a powerful microprocessor to process the fingerprints, an I / O interface and a software development kit.

MORPHOPACK™ is a fingerprint sensor and authentication peripheral for logical access control. It consists of a capacitive fingerprint reader, a USB PC interface and processing software. It allows strong person authentication, or identification from among a hundred or so individuals. It is an excellent solution for protecting and securing computer files or networks and commercial transactions on the Internet. .

Stand-alone capacity of 2,000 users. Read range of 3.5" (9 cm) with internal RF antenna. With control unit, manual and quick start guide. 7 LEDs and buzzer provide visual and audible feedback. System is monitored by a unit anti-tamper device

The Honeywell Access Systems’ NStar™ is an access control system designed to provide a cost effective solution for entry level applications plus the ability to seamlessly expand and adapt to future growth needs. The NStar system is composed of the new NS2 control panel and NStar access control software. With NStar you can start small and easily expand and upgrade your access control system as your needs change.