Access control systems & kits  (537)

4 relay and COMBUS add. power supply for KT-300.

Command button for IoProx P200 reader

Command button for IoProx P400 reader

Brushed stainless.

Hand recognition HANDKEY II system. Indoor/outdoor use. Baud rate: 300 to 28.8k bps. Verification time:

Battery backup for hand recognition reader HK-CR/2

EM-801: memory expansion, 9728 users. EM-803: memory expansion for 32512 users.

PassPoint™ Plus is an entry level access solution with integration to Honeywell VISTA 32, 128 and 250 intrusion panels. Integration to the VISTA panel is provided through PassPoint Plus and VISTA Gateway Module (PTVGM). Integration capabilities include Arm or Disarm upon card swipe, First Card In / Last Card Out, Bypass Zone with card swipe, Door Access with keypad, Prevent Access when system is armed and more.

The DSX-LAN(M) module is typically used to connect a Master Controller to the Host or Comm Server PC over a Local or Wide Area Network.  The WinDSX software is inherently TCP/IP capable and can redirect communication that would normally be transmitted out over serial port, over a LAN/WAN to a particular IP address.  The DSX-LAN(M) module receives that communication and converts it to RS-232 or RS-485 that connects directly to the Master Controller.  This adds another avenue of flexibility to WinDSX by utilizing TCP/IP communications as well as dial-up modem and direct serial port connectivity.  All three means of communication can be used at the same time in the same system.  The DSX-LAN(M) is powered from the DSX Controller which can provide battery backup.The DSX-LAN(M) module is sold in two different configurations.  The DSX-LAN module provides IP communications as the only method of connectivity.  The DSX-LAN(M) has dial-up modem backup.  The DSX-LAN module must be ordered with the (M) option along with the DSX modem to support the dial-up backup feature.Additional Features: Powered from DSX Controller Auto-sensing 10/100 Base-T / Auto-Duplexing RS-232 / RS485 Controller Communication Configured through serial port Dial-Up Modem Backup - Optional Built by DSX for DSX Static or Dynamic Communications Simple to Configure with 3 entries Password Protected Programming 2 Year Limited Warranty

C-Cure 800's Central Monitoring Station option will allow a user to monitor activity from multiple C-Cure systems from a single monitoring station. Features inlcudes viewing of all activity, events, and maps, acknowledgement of events, all manual actions, and viewing of all status screens. The user can easily select any pre-configured server from a combo-box labeled "Select CMS Server" on the monitoring station toolbar.

The iCLASS CP575A Card Programmer is designed for on-site programming of access control data, Personal Identification Number (PIN) codes, and user data onto HID iCLASS cards. It allows HID formats, keypad PIN codes and user data fields to be programmed directly into iCLASS contactless smart cards. This enables the system manager to stock blank cards and program cards on demand when new cardholders are added to the system. To ensure security of the format and cards, an iCLASS Card Programmer licence is required.

C•CURE® 800/8000 provides users with the basic ability to capture, import, and display images from within the standard system personnel window. For sophisticated badging however, C•CURE® ID provides a fully integrated photo imaging application that runs on any C•CURE client supporting Windows® XP, NT, or 2000. C•CURE ID’s powerful photo imaging features a user-friendly badge layout editor, support for multiple graphic formats, network retrieval of images, controlled iris, and zoom capability. Also included are signature capture, unlimited badge layouts, and background display support.

The C•CURE Enterprise Integration Server allows the real-time transfer of information between the C•CURE 800/8000 access control system and the Human Resource/Payroll module of SAP or PeopleSoft. The C•CURE EIS streamlines the process of enrolling personnel data into the C•CURE 800/8000 system by importing key data from SAP or PeopleSoft, eliminating duplication of effort, delay, and errors. C•CURE EIS can facilitate the exchange of information between C•CURE 800 and other systems such as an LDAP server, Active Directory service, Kronos, ADP, MedTech, or RAPP to keep access information current.

The apS Advanced Power System provides uninterrupted power for the apC/8X and iSTAR intelligent access control and alarm monitoring panels. The apS connects directly to the main power fail input replacing the standard power supply provided with the apC/8X or iSTAR. When the apS senses an AC power failure it immediately notifies the host, while continuing to supply the power required to operate the panels and connected readers. Two relay outputs are provided on the apS for connection to inputs on the apC/8X or iSTAR. LED indicators located on the cabinet door of the apS display AC loss and the relative battery voltage level to approximate the state of battery charge.

With these powerful add-on modules, the apC or apC/8X provides greater functionality of access control, alarm monitoring, and integrated security applications. The I8 Input Bus Module provides eight Class-A supervised inputs. A total of eight input modules can be connected to one apC or apC/8X and a total of four input modules can be connected to one apC/L. The R8 Output Bus Module provides an additional eight Form C dry contact relay outputs. A total of eight output modules can be installed on one apC or apC/8X and a total of four output modules can be installed on one apC/L. Output and Input modules connect on the card reader bus reducing wiring.

The C•CURE 800 - Aegis™ Option from KapLogic Corporation enhances the overall C•CURE 800 user interface by allowing features such as CCTV, alarm and intercom systems to be combined graphically with the access control system to form a truly integrated security system. The application has a modular architecture allowing significant flexibility in system design, distributed processing and scalability. Aegis provides a consistent, simple user interface, where functions can be performed by point-and-click operation.

The NSEKR is an expansion kit with readers that adds two doors to an existing NStar installation.The kit contains the NS2 controller (NS2), locking enclosure (ENC10), NS2 accessory kit (NS2ACC),two HID compatible OmniProx readers (OP10HONE), transformer (PSX220) and two suppressorkits (S-4).

LEGATO RepliStor provides a reliable low-cost solution for business continuance, disaster data recovery, data migration, and centralized backup. RepliStor provides real time information protection and availability for Microsoft Windows NT and 2000 environments by replicating and distributing data to one or more targeted systems, either locally or remotely. These targeted systems can either be Windows 2000/NT Servers or Microsoft Cluster Servers. It also compliments a LEGATO Co-StandbyServer by having the capability to mirror system disks. RepliStor’s ability to replicate and distribute data is also used to balance loads across servers to different locations.

The webEntry is an entry level access control system allowing complete administration of system tasks via a web browser from anywhere in the world with a suitable network connection. The webEntry controller is available in various configurations and supports up to a maximum of 32 doors with two multidrop networks of RS-485, each of these supporting up to 16 InfoProx or InfoProx Lite card readers. The webEntry controller has the ability to send event notifications visa SMTP to pagers, cell phones and email accounts.

The webEntry is an entry level access control system allowing complete administration of system tasks via a web browser from anywhere in the world with a suitable network connection. The webEntry controller is available in various configurations and supports up to a maximum of 32 doors with two multidrop networks of RS-485, each of these supporting up to 16 InfoProx or InfoProx Lite card readers. The webEntry controller has the ability to send event notifications visa SMTP to pagers, cell phones and email accounts.

The ability to protect and keep mission critical data and applications available has become a key factor for many organizations. Legato’s Co-StandbyServer provides one of the most advanced, reliable and, cost effective solutions. Through the use of a dedicated link, risks and latency effects typically associated with public network are reduce. Co-StandbyServer’s ability to separate servers up to 10 kilometers of dark fiber adds additional configuration flexibility and access protection in a situation where local access is temporarily not available. In the event that a server should fail, the resources from that server such as IP addresses, shares, applications and data volumes are activated (fail over process) on the secondary server.

The N-750 is an integrated system that provides a single software and single panel solution. Integration between access control and intrusion provides unique capabilities to manage multiple tasks through a single system. The N-750 is capable of managing multiple users across multiple accounts through the Win750 software. The N-750 can be installed stand-alone or at a Central Station. The N-750 can report standard events and alarms including door access events like Door Held Open or Door Forced Open through the internal dialer.

World's best performing fingerprint algorithm : Top results in NIST MINEX tests and FVC2004/2006. Fast matching speed: 1:100,000 within a second (genuine matching on Intel Core2Duo 2.13GHz). Multi-threaded code design fully utilising multi-core CPU power. Plug and play USB 2.0 high speed interface. Supports multiple devices handling. 500 dpi optical fingerprint sensor. Scratch free sensor surface. Supports Windows 98, Me, 2000, XP, Windows Vista, Windows 7. Supports multiple programming languages: Visual C++, Visual Basic, .NET, Delphi. Fingerprint templates compatible with SFM3000/3500 modules and other Suprema Products.

IntelliSense’s Request-to-Exit (RTE) sensors offer basic and full-featured models to suit every access control application. The quick-install sensors are extremely flexible, provide a generous amount of wiring room and contain built-in internal shutters to guard against tampering. The standard (IS-310) and full-featured (IS-320) units both share the same look, making them the ideal choice for retrofits as well as new installations. Advanced features on IS-320 include piezo sounder, door contact input, reader/keypad/keyswitch input, remote arming and sounder inputs, monitor door and Fail Safe/Secure modes.

Remote passive programmer - hand-held keypad to program N-300.

The C•CURE 800 Starter Kit provides a robust security solution for small businesses. By extending the popular C•CURE 800 product line to include this new solution, businesses of all sizes will be able to utilize the same state-of-the-art access control solutions usually found in larger corporations.

The ISONAS Demo Unit is a fully functional access control system. It can be used when demonstrating the features available with the ISONAS system, and to help illustrate answers to the customer's specific questions. The Demo Unit’s compact design, easy portability, and quick set-up assure smooth, effective customer presentations.

Cardax Cardax FT is a comprehensive Microsoft® Windows® based security system.  It integrates access control and alarms management, intruder alarm monitoring, remote digital imaging, intercom, and PhotoID badging.  The system stores information about cardholders, the site, and system activity.  It can be integrated with other systems for both security requirements (i.e. DVR and CCTV) and facilities management (including HR and ERP).  Cardax FT is manufactured and marketed by Gallagher Security Management Systems, a division of the Gallagher Group Ltd. Integration with SAGEM Biometric Fingerprint Readers Gallagher Security Management Systems has integrated SAGEM's fingerprint readers with Cardax FT.  The development seamlessly integrates the fingerprint enrolment and template management functions for the SAGEM readers, eliminating the need to run two separate applications.  The integration covers the two methods of biometric analysis - identification and verification. PowerFence - Trophy FT PowerFence™ Trophy FT integrates the unique advantages of advanced PowerFence™ perimeter security with the sophisticated security integration platform provided by Cardax FT.  Key features of PowerFence Trophy FT are its scalability, network compatibility, integration possibilities, system architecture and ability to implement Cardax FT electronic access control and intruder alarms.  The integrated solution enables sites to manage system-wide security through one management platform, through a single user interface.  Gallagher Security Management Systems, the manufacturer of both systems, believe it's a world first.

Typical range of up to 25m. Model WLS-3700KSF is a wireless full size transmitter KSF format. Model WLS-3700W26 is a wireless full size transmitter with 26-bit Wiegand format.

Typical range of up to 25m. Model WLS-3701KSF is a wireless keytag transmitter KSF format. Model WLS-3701W26 is a wireless keytag transmitter with 26-bit Wiegand format. Compatible with WLS-series readers.

Converts RS-232 to RS-485. Extends communication up to 1.2 km. Uses unshielded, twisted communication cable. Supports up to 32 Kantech controllers.

Keypad reader. For single gang box mounting. Output format: 3x4 matrix or buffered Wiegand. Also in beige colour.

Dependable performance – Parallel processors offer unmatched reliability providing back-up for one another in the event one requires servicing. Advanced features – The easily upgradeable hardware includes EZ HSM manager to simplify reporting and user management, encrypted key storage and internal intrusion detection. Compact footprint – Efficiently designed for such a powerful HSM, it fits into a 9” X 6” X 1.75” sized appliance for easy storage, with rack-mounted versions available. PCI certified – Certified to meet Payment Cards Industry (PCI) security standards and listed as number 4-60118. Broad compatibility – Compatible with a wide variety of cryptographic and key management algorithms.

Typical range of up to 25m. Receiver powered directly from controller KT-200 or KT-300. Model WLS-5401KSF is a wirelss outdoor receiver, with KSF format. Model WLS-5401W26 is a wireless outdoor receiver with 26-bit Wiegand format.

Anviz Global's FacePass Pro uses advanced infrared light source that enables the terminal to ensure illumination, even in total darkness. It is an appropriate security device for any user regardless of complexion, facial expression, hairstyle, and facial hair.

The apC/8X controller is an intelligent access control and alarm monitoring panel which serves as a basic building block for all C-Cure security management systems. The apC/8X supports optinal add-on modules that make the apC/8X a powerful and flexible platform for a wide variety of access control, alarm monitoring and integrated security applications.

Anviz Global UltraMatch S1000 adopts BioNANO algorithm and offer stable iris recognition while delivering high-level security in biometric enrollment, individual identification, and access control.

Anviz Global's T50M is part of a new generation of simple standalone access control devices. A metal case and waterproof cover ensure the device is suitable for installation outdoors. T50M owns the most compact design in the world. Easy network management through TCP/IP networking or RS485, with ANVIZ self-developed and self-designed touch activated optical fingerprint sensor and BioNANO core fingerprint algorithm.

The InfoProx Lite is a low cost proximity card reader that is designed to operate as a card reading device on a webEntry access control system where off-line card validation is not required. The card reader, back-lit LCD, LEDs and keypad are housed in a single polycarbonate enclosure. The keypad offers additional security when PIN validation is required. The InfoProx Lite controls local door strikes or other equipment without the need for a separate door controller. An exit reader is also supported for bi-directional (in/out) door control.

The InfoProx card reader is designed for use as part of webEntry access control system. The reader can store transaction details to be transferred to the host computer when communications are restored. The reader, back-lit LCD, LEDs and keypad are housed in a single polycarbonate enclosure. The keypad offers additional security when PIN validation is required. The InfoProx card reader has four analog inputs and one output allowing it to control local door strikes or other equipment without the need for a separate door controller. The exit reader is also supported for in/out control.