Ajax KeyPad Plus wireless touch keypad supporting encrypted contactless cards and key fobs

• Make: Ajax
• Model code: KeyPad Plus
• Mount Type: SmartBracket mount
• Internal/External: Indoor
• Remote Operation: Yes

KeyPad Plus is a wireless touch keypad for managing the Ajax security system with encrypted contactless cards and key fobs. Supports “silent alarm” when entering the duress code. Manages security modes using passcodes and cards or key fobs. Indicates the current security mode with a LED light. KeyPad Plus arms and disarms the security of the entire facility or separate groups as well as allows activating the Night mode. You can control the security modes with KeyPad Plus using: - Passwords. The keypad supports general and personal passcodes, as well as arming without entering a passcode. - Cards or key fobs. You can connect Tag key fobs and Pass cards to the system. To quickly and securely identify users, KeyPad Plus uses the DESFire® technology. DESFire® is based on the ISO 14443 international standard and combines 128-bit encryption and copy protection. Before entering a passcode or using Tag/Pass, you should activate (“wake up”) the KeyPad Plus by sliding your hand over the touch panel from the top down. When it is activated, the button backlight is enabled, and the keypad beeps. The KeyPad Plus is equipped with LED indicators that show the current security mode and keypad malfunctions (if any). The security status is displayed only when the keypad is active (the device backlight is on). You can use the KeyPad Plus without ambient lighting as the keypad has a backlight. The pressing of the buttons is accompanied by a sound signal. The backlight brightness and keypad volume are adjustable in the settings. If you do not touch the keypad for 4 s, KeyPad Plus reduces the backlight brightness, and 8 s later goes into power-saving mode and turns off the display. Function button KeyPad Plus has a Function button that operates in 3 modes: - Off — the button is disabled and nothing happens after it is pressed. - Alarm — after the Function button is pressed, the system sends an alarm to the security company monitoring station and all users. - Mute Interconnected Fire Detectors Alarm — after the Function button is pressed, the system mutes the fire alarm of the FireProtect/FireProtect Plus detectors. Available only if an Interconnected Fire Detectors Alarm is enabled in the hub settings. Duress code KeyPad Plus supports duress code. It allows you to simulate alarm deactivation. The Ajax app and sirens installed at the facility will not give you away in this case, but the security company and other users of the security system will be warned about the incident. Unauthorized access auto-lock If a wrong code is entered three times within 1 minute, the keypad will be locked for the time adjusted in the settings. During this time, the hub will ignore all codes, while simultaneously informing users of the security system about an attempt to guess the code. Two-stage arming KeyPad Plus can participate in two-stage arming, but cannot be used as a second-stage device. The two-stage arming process using Tag or Pass is similar to arming using a personal or general passcode on the keypad.

Read more